|
Re: Owner's Manual Onan MDKDP 6,5
I have also just uploaded the full service/shop manual for the Onan MDKD series. This is for the 6.5kW genset used on the older Amel SM boats. It is one of the best laid out service manuals I have
I have also just uploaded the full service/shop manual for the Onan MDKD series. This is for the 6.5kW genset used on the older Amel SM boats. It is one of the best laid out service manuals I have
|
By
Karen Smith
·
#56284
·
|
|
Foredeck alarm
Hi all,
I have someone looking after by boat and he has reported a beeping alarm coming from the foredeck locker. I guess its either the anchor or furler electrics. Would anyone know what it is
Hi all,
I have someone looking after by boat and he has reported a beeping alarm coming from the foredeck locker. I guess its either the anchor or furler electrics. Would anyone know what it is
|
By
Paul Dowd and Sharon Brown
·
#56283
·
|
|
Re: Owner's Manual Onan MDKDP 6,5
Jarek,
I think this is what you need:
Onan MDKC MDKD Owners Manual 981-0120.pdf
Jarek,
I think this is what you need:
Onan MDKC MDKD Owners Manual 981-0120.pdf
|
By
CW Bill Rouse
·
#56282
·
|
|
Re: Fresh Water Pump
JérémyThat pump from TF is a very good pump.Bill
CW Bill
JérémyThat pump from TF is a very good pump.Bill
CW Bill
|
By
CW Bill Rouse
·
#56281
·
|
|
Re: Replacing Genoa furler rivets with screws and backing plates
Hi Steve,
I know either answer as the folks at Martinique did that conversion for me. Really glad I had it done and just a word to say that they did not need to cut off the little bit of the bottom
Hi Steve,
I know either answer as the folks at Martinique did that conversion for me. Really glad I had it done and just a word to say that they did not need to cut off the little bit of the bottom
|
By
Gary Wells
·
#56280
·
|
|
Super Maramu wall lamp shades
Look what I found:
https://www.seatechmarineproducts.com/imtra-ilsh60190-shade-for-venice-led-wall-light.html
Look what I found:
https://www.seatechmarineproducts.com/imtra-ilsh60190-shade-for-venice-led-wall-light.html
|
By
CW Bill Rouse
·
#56279
·
|
|
Owner's Manual Onan MDKDP 6,5
Hello,
I am looking for a PDF version of owner's manual and spare part catalogue for my Onan MDKDP 6,5 Generator. I have this generator on my boat but previous owner lost the manual.
Hello,
I am looking for a PDF version of owner's manual and spare part catalogue for my Onan MDKDP 6,5 Generator. I have this generator on my boat but previous owner lost the manual.
|
By
Jarek Zemlo
·
#56278
·
|
|
Re: Fresh Water Pump
Hello,
I don't have a freshwater pump in the Super Maramu I just bought (The previous owner lived in the port, the pump broke and he just took it out). So one of the first jobs I'm
Hello,
I don't have a freshwater pump in the Super Maramu I just bought (The previous owner lived in the port, the pump broke and he just took it out). So one of the first jobs I'm
|
By
Jérémy Lajotte,
·
#56277
·
|
|
Re: novice problem
Hi Matti. I will take a photograph tomorrow and post it.
Danny
Hi Matti. I will take a photograph tomorrow and post it.
Danny
|
By
Danny and Yvonne SIMMS
·
#56276
·
|
|
Re: novice problem
Hi Dan,
I would appreciate a lot for pictures that I could share with Nacho.
So much better when a proven structure can be used.
Best regards
Matti
Borador #398
Hi Dan,
I would appreciate a lot for pictures that I could share with Nacho.
So much better when a proven structure can be used.
Best regards
Matti
Borador #398
|
By
Matti Lohikoski
·
#56275
·
|
|
Re: New owner of SM#121
HI Jeremy,
Welcome. I almost get mine in the same time ((last November). She was also surveyed by Olivier and I have the same comments about the performance of Olivier.
Koriolys is an SM similar to
HI Jeremy,
Welcome. I almost get mine in the same time ((last November). She was also surveyed by Olivier and I have the same comments about the performance of Olivier.
Koriolys is an SM similar to
|
By
Alain Blanchard
·
#56274
·
|
|
Re: Deck repairs for an SM ( and other Amels )
Agree with Eric. We used the same on Aquarius.
Ken Powers
Aquarius
SM2K#262
Agree with Eric. We used the same on Aquarius.
Ken Powers
Aquarius
SM2K#262
|
By
Ken Powers SV Aquarius
·
#56273
·
|
|
Re: Deck repairs for an SM ( and other Amels )
And another photo looking from the stern:
Sent from Yahoo Mail for iPad
And another photo looking from the stern:
Sent from Yahoo Mail for iPad
|
By
Ross Hickey & Donna Hammond
·
#56272
·
|
|
Re: New owner of SM#121
Welcome to the Group Jeremy
At least you are in the right place to get help 😁
Enjoy your project hopefully in not too long you’ll be out in the great blue
Cheers 🥂
Courtney Gorman
Trippin
Welcome to the Group Jeremy
At least you are in the right place to get help 😁
Enjoy your project hopefully in not too long you’ll be out in the great blue
Cheers 🥂
Courtney Gorman
Trippin
|
By
Courtney Gorman
·
#56271
·
|
|
Re: Deck repairs for an SM ( and other Amels )
We have just finished painted our deck lines and are very happy with the final result. Our chocolate brown lines were well worn and the deck was looking shabby.
I started with washing all the deck
We have just finished painted our deck lines and are very happy with the final result. Our chocolate brown lines were well worn and the deck was looking shabby.
I started with washing all the deck
|
By
Ross Hickey & Donna Hammond
·
#56270
·
|
|
Re: Deck repairs for an SM ( and other Amels )
Sorry to hear you caught COVID, but glad it was a mild case. I get my 1st Moderna jab in 4 days, and hoping we can travel internationally by the summer. The decks are noticeably cooler to walk on, and
Sorry to hear you caught COVID, but glad it was a mild case. I get my 1st Moderna jab in 4 days, and hoping we can travel internationally by the summer. The decks are noticeably cooler to walk on, and
|
By
Stephen Davis
·
#56269
·
|
|
Re: novice problem
Hi Matti. The tube to the mizzen stays is the perfect solution. We have had it there for 11 years. Flatten the ends and clamp around the stay as amel did on the main mast stays.put it over the boom
Hi Matti. The tube to the mizzen stays is the perfect solution. We have had it there for 11 years. Flatten the ends and clamp around the stay as amel did on the main mast stays.put it over the boom
|
By
Danny and Yvonne SIMMS
·
#56268
·
|
|
Re: Deck repairs for an SM ( and other Amels )
Thanks, John ,
I do have a smattering of French. How else do you speak to your boat ?
Ian
Thanks, John ,
I do have a smattering of French. How else do you speak to your boat ?
Ian
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#56267
·
|
|
Re: Deck repairs for an SM ( and other Amels )
Thanks , Stephen ,
That’s reassuring to read . I admire your white stripes . Beautifully done— any cooler to walk on bare foot ?
My guy has done the first 4 repairs and sent me photos .
Thanks , Stephen ,
That’s reassuring to read . I admire your white stripes . Beautifully done— any cooler to walk on bare foot ?
My guy has done the first 4 repairs and sent me photos .
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#56266
·
|
|
Re: Where do you send the grey water from a washing machine?
Thanks all for the advice. That helped me pushing back.
I had to fight and nail with the yard, they wanted to drill another hole in the hull :-)
--
John Bernard "JB" Duler
San Francisco
Meltem # 19,
Thanks all for the advice. That helped me pushing back.
I had to fight and nail with the yard, they wanted to drill another hole in the hull :-)
--
John Bernard "JB" Duler
San Francisco
Meltem # 19,
|
By
JB Duler
·
#56265
·
|