|
Re: [Amel Yacht Owners] Onan Generator
Hi again, Heinz,
I just stumbled across a technique to flash your generator that I had not seen before. Nor have I tried it but it sounds like fun and just might solve your problem..
Plug an electric
Hi again, Heinz,
I just stumbled across a technique to flash your generator that I had not seen before. Nor have I tried it but it sounds like fun and just might solve your problem..
Plug an electric
|
By
Craig Briggs
·
#43226
·
|
|
Bonfiglioli Main Furler Schematic
Our main furler is inoperable. We've started to troubleshoot at the motor. Replaced the brushes and cleaned up the commutator. There's power at the breaker and the wires leading into the motor. No
Our main furler is inoperable. We've started to troubleshoot at the motor. Replaced the brushes and cleaned up the commutator. There's power at the breaker and the wires leading into the motor. No
|
By
Ian Townsend
·
#43224
·
|
|
Amel54 SSB installation
Hi all , fellow Amel owners. Since recently i am proud owner of Fidelis an Amel54 2009.
I am preparing her for paticipating ARC+2019. and decided to install a SBB radio.
The boat is prepared and has
Hi all , fellow Amel owners. Since recently i am proud owner of Fidelis an Amel54 2009.
I am preparing her for paticipating ARC+2019. and decided to install a SBB radio.
The boat is prepared and has
|
By
Jeroen Jeltes
·
#43225
·
|
|
Re: [Amel Yacht Owners] Santa Marta Colombia
Hi Mark,
We might be heading your way after the New Year.
Please stay in touch.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Kimberlite@...
Hi Mark,
We might be heading your way after the New Year.
Please stay in touch.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Kimberlite@...
|
By
eric freedman
·
#43223
·
|
|
Re: [Amel Yacht Owners] Santa Marta Colombia
Hi Eric,
Not since wehave been here. So far all is good. We plan to be here for a couple of months.
Hope you aredoing well.
With bestregards,
Mark
Skipper
Sailing Vessel- Cream
Hi Eric,
Not since wehave been here. So far all is good. We plan to be here for a couple of months.
Hope you aredoing well.
With bestregards,
Mark
Skipper
Sailing Vessel- Cream
|
By
Mark Erdos
·
#43222
·
|
|
Re: [Amel Yacht Owners] Onan Generator
Hi Heinz,
It is very easy, but I would suggest you "google" it on a site in your native language. Basically it is putting 12v across the coils to excite the generating circuit. There are many "U" tube
Hi Heinz,
It is very easy, but I would suggest you "google" it on a site in your native language. Basically it is putting 12v across the coils to excite the generating circuit. There are many "U" tube
|
By
Craig Briggs
·
#43221
·
|
|
Re: [Amel Yacht Owners] Onan Generator
By
eric freedman
·
#43220
·
|
|
Santa Marta Colombia
By
eric freedman
·
#43219
·
|
|
Re: [Amel Yacht Owners] Onan Generator
Thanks fore the anther but how do I re-flash a generator?
Heinz
Am 29.11.2018 um 10:41 schrieb sangaris@... [amelyachtowners] <amelyachtowners@...>:
Thanks fore the anther but how do I re-flash a generator?
Heinz
Am 29.11.2018 um 10:41 schrieb sangaris@... [amelyachtowners] <amelyachtowners@...>:
|
By
Heinz Stutenbaeumer
·
#43218
·
|
|
Re: [Amel Yacht Owners] Onan Generator
Heinz,
The most likely fault is 2 things:
The Onan Governor as Mark and others have said. This governor keeps the generator at constant RPM, regardless of load. The generator is required to be at
Heinz,
The most likely fault is 2 things:
The Onan Governor as Mark and others have said. This governor keeps the generator at constant RPM, regardless of load. The generator is required to be at
|
By
CW Bill Rouse
·
#43217
·
|
|
Re: [Amel Yacht Owners] Onan Generator
Heinz,
I believe your Onan has a "No AC Output" shutdown switch that would shut it down as you describe.
With any luck, you may simply have to re-flash the generator to solve the problem.
If that
Heinz,
I believe your Onan has a "No AC Output" shutdown switch that would shut it down as you describe.
With any luck, you may simply have to re-flash the generator to solve the problem.
If that
|
By
Craig Briggs
·
#43216
·
|
|
Re: [Amel Yacht Owners] Onan Generator
A thought, how are you increasing speed? The genset governor should handle that automatically
A thought, how are you increasing speed? The genset governor should handle that automatically
|
By
John Clark
·
#43215
·
|
|
Re: [Amel Yacht Owners] Onan Generator
Are you checking for fault codes at the remote start panel?
John
SV Annie SM37
Le Marin MQ
Are you checking for fault codes at the remote start panel?
John
SV Annie SM37
Le Marin MQ
|
By
John Clark
·
#43214
·
|
|
Re: [Amel Yacht Owners] Onan Generator
All the electrical fuses are in. The diesel runs perfectly when I hold it Manuel at the start. Something has to tell him he's shutting
Heinz
Am 29.11.2018 06:52 schrieb "'Mark Erdos' mcerdos@...
All the electrical fuses are in. The diesel runs perfectly when I hold it Manuel at the start. Something has to tell him he's shutting
Heinz
Am 29.11.2018 06:52 schrieb "'Mark Erdos' mcerdos@...
|
By
Heinz Stutenbaeumer
·
#43213
·
|
|
Onan Generator
Hello
I would have yesterday with Onan generator switched on a short circuit in an electric line.
Then the generator went out.
The generator starts since then briefly, then goes out however
Hello
I would have yesterday with Onan generator switched on a short circuit in an electric line.
Then the generator went out.
The generator starts since then briefly, then goes out however
|
By
Heinz Stutenbaeumer
·
#43211
·
|
|
Re: [Amel Yacht Owners] Onan Generator
Heinz,
I think you aredealing with a couple of issues.
Since you had anelectrical short did you check the master circuit breaker on the generator?
Is the fuelsupply sufficient? Are you
Heinz,
I think you aredealing with a couple of issues.
Since you had anelectrical short did you check the master circuit breaker on the generator?
Is the fuelsupply sufficient? Are you
|
By
Mark Erdos
·
#43212
·
|
|
Re: [Amel Yacht Owners] Prop Shaft Brake - How to remove brake pads?
Great tips Colin. Thank you!
Safe sailing!
Porter
A54-152
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
Great tips Colin. Thank you!
Safe sailing!
Porter
A54-152
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
|
By
Porter McRoberts
·
#43210
·
|
|
Re: [Amel Yacht Owners] Wanted: SM Ballonner
Paul
I believe we still have our ballonner from SM #362. It is located in Rhode Island. Paul & Sue LaFrance
Paul
I believe we still have our ballonner from SM #362. It is located in Rhode Island. Paul & Sue LaFrance
|
By
Paul LaFrance <pflafrance@...>
·
#43208
·
|
|
Re: [Amel Yacht Owners] Prop Shaft Brake - How to remove brake pads?
For the record we changed the brake pads out with new ones today. This was not a difficult job at all, but to do this we found it best to remove the complete shaft brake system via the two bolts onto
For the record we changed the brake pads out with new ones today. This was not a difficult job at all, but to do this we found it best to remove the complete shaft brake system via the two bolts onto
|
By
Colin - ex SV Island Pearl
·
#43209
·
|
|
Wanted: SM Ballonner
Hello,
Our recently purchased SM hull no. 238 has no ballooner. Anyone not using theirs and want to sell it? I'll take one even if it's tie-died.
Thanks!
Paul
SM 238 MARACUYA
Hello,
Our recently purchased SM hull no. 238 has no ballooner. Anyone not using theirs and want to sell it? I'll take one even if it's tie-died.
Thanks!
Paul
SM 238 MARACUYA
|
By
paul.cooper74@...
·
#43207
·
|