Maud just shipped us two pairs of these. I guess she received them from the supplier. Bill Kinney SM160, Harmonie Annapolis, MD, USA

Here's another photo of the installation looking down from the companion way. It can be seen that there is room to get around the seat, no problem. Cheers Alan Elyse SM437

It's all here....thus is my seat...I didn't get it from Vetus...but is the same

Ryan, I have always checked mine by inserting it all the way in. As far as I can seen, there are no details about how to do this in the manual. It just seemed the "right" way in the absence of

Hi all, silly question here... What is the correct way to take a reading of the oil level in my Volvo TMD-22: do I insert the dip stick fully, or do I just rest it on top of the tube? Thanks, Ryan and

On Sat, 1 Sep 2018 at 11:00, Danny and Yvonne SIMMS simms@... [amelyachtowners] <amelyachtowners@...> wrote: Hi Alan, what are the overall dimensions. Mine is 480 mm x 480 mm Mine

Hi Alan, what are the overall dimensions. Mine is 480 mm x 480 mm Mine has an alloy hinge, I avoided plastic hinges for security reasons. In a big seaway there will be quite a load on

Like Barnacle Buster, it's phosphoric acid based. Like Coca-Cola! Phosphoric acid is cheap. Cheers, Craig SN68

Hello Ryan, I too am looking for a pair of these pulleys. The note below is what I just received from Maud following my inquiry. Will be interested in what you find relative to schedule and

good inormation, I'll check, thanks Thomas!

Dean thank you The turbo does spin up. More with load of course. I am able to measure pressure. 1000 rpm temp 78c and 0 kPa quiet 1500 rpm temp 79c and 20 kPa high pitched whir sound bit no

The seat cushion on our seat measures 420mm across, 440mm front to back. I think you'll find that most boat seats are in that range or bigger. They have to be that size otherwise you couldn't sit

Paul, I assume it is salt-water? Bill is right, likely from BT. Your anchor chain locker drains through the grey water system. A loose connection at the watertight bulkhead between the head and

Hi Pat. I use SewClean by the same folks who make Barnacle Buster. 10 years of treating every 6 mo this and no apparent build-up. Kent SM243 Kristy

Hi Porter, No question remains in my mind that this is a problem for Volvo. Re Nick’s observation, does the turbo spin up? I wonder if the turbo is load controlled or just rpm controlled. If it

Danny, I would like to see it.I bought the ferry seat that Alan installed, its a great design , but too large for the area ,in my opinion and I am returning it. Thanks, Pat

Amen! I agree Bill. Thank you very much. I made a video for posterity if anyone interested https://youtu.be/y8921P2B1Yk Porter Excuse the errors. Sent from my IPhone Www.fouribis.com

I absolutely agree that you have eliminated every possible cause of resistance causing the low RPM. And, since Volvo specified the sizes of the AutoProp and the fixed Prop, Volvo cannot claim that the

Here is the one made by AutoProp: Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My