Mark, And the "secret switch." Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School www.amelschool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Kent, It is going tobe a problem in one of two areas. The starter or the panel (fuse or key switch).This is assuming you have already checked the engine start battery? If you haven’tchecked the

---------- Original Message ---------- From: Danny and Yvonne SIMMS <simms@...> To: amelyachtowners@... Date: 28 September 2018 at 03:05 Subject: Re: [Amel Yacht Owners] Vetus Coupling Failure

Very informative, Alan, thanks. So unless I was led astray, I must have Plexiglas. Either way, the DC795 should work if I rough the lens up a bit. You guys never cease to amaze me. Kent S/V

Hi all. My Yanmar 4JH4HTE 110 HP has been flawless for 5 years except for a starter that had to be replaced last year. When I had to move Kristy from a slip at the boat yard to the travel lift, she

Those coupling bolts need checking on a regular basis. I have heard of numerous "bolt shearing" episodes over the years and I'm sure they have all been caused by the bolts coming loose. There are

I think maybe you're referring to Plexiglas rather than plexiglass ....... https://www.acplasticsinc.com/informationcenter/r/plexiglass-vs-plexiglas Cheers Alan Elyse SM437 Bonne Anse

I think you have to use the iridium mail server. I use kar at iridium dot net. It works with the iScribe software. I use Iridium AxcessPoint get on the internet for other web use. I got my iridium

Hello, We're currently nearGibraltar to replace our 12 batteries that overheated last week. I assume onebattery failed causing the voltage to remain low. When motorsailing during partof the trip from

..so then the next question is, are there VOLVO compatible quality items available at market prices? Does anyone have experience and / or recommondatios? thanks, Alex SY NO STRESS AMEL54-15

Hmm, thanks, Gabriele, I didn't realize that. When I ordered the new lens, I was told I could either have acrylic or plexiglass. Acrylic being stronger, but Plexiglass being more resistant to

Hi Kent Acrilic and Plexiglas are the same. Plexiglas is the trade name given by the inventor Roehm & Haas . Regards Gabriele Sunny Side Maramu #219

Ian, Did you see the PDF I sent you? It clearly shows the machining that Amel normally does to the Vetus coupling before installation. Amel does this to expedite the installation. Was your coupling

Hi Ian. It's a bit late now but if you had cut the heads off the bolts and replaced them with bolts threaded each end you could have easily done the job in place. It means you don't have the neat

Bill, Could you post those images in the Photos section? I can't seem to access them from your post. Thanks, Duane

Ian, Did you see the PDF I sent you? It clearly shows the machining that Amel normally does to the Vetus coupling before installation. Amel does this to expedite the installation. Was your coupling

Hi Bill. I did not see an attachment to your email about the Vetus coupling. Regards, Mark Pitt Sabbatical III, SM#419