|
Re: [Amel Yacht Owners] Removing drawer faces
Thanks, Ian. Yes they must have changed between Trevor's 27 and my 68 as we don't have the cubby under the two drawers that Trevor has.
Oh well - what's another hole?
Cheers, Craig, SN68
---In
Thanks, Ian. Yes they must have changed between Trevor's 27 and my 68 as we don't have the cubby under the two drawers that Trevor has.
Oh well - what's another hole?
Cheers, Craig, SN68
---In
|
By
Craig Briggs
·
#42226
·
|
|
Re: [Amel Yacht Owners] Interior wood quality
I am in the process of stripping and revarnishing all of the wood around the portlights and hatches where the sun had bleached out the wood.
It was very difficult to remove these panels because of
I am in the process of stripping and revarnishing all of the wood around the portlights and hatches where the sun had bleached out the wood.
It was very difficult to remove these panels because of
|
By
karkauai
·
#42220
·
|
|
Re: [Amel Yacht Owners] Rigging
When my standing rigging was 15 years old, I had it replaced. It looked fine, but I was ready to cross oceans, so replaced it anyway. I had a few lower swages cut open for inspection, and found
When my standing rigging was 15 years old, I had it replaced. It looked fine, but I was ready to cross oceans, so replaced it anyway. I had a few lower swages cut open for inspection, and found
|
By
karkauai
·
#42219
·
|
|
Series Drogue Construction Details-from someone that used it
By
eric freedman
·
#42218
·
|
|
Re: [Amel Yacht Owners] Interior wood quality
Thank you
By
james Hosford
·
#42217
·
|
|
Re: [Amel Yacht Owners] Interior wood quality
Thank you! So are the water tight doors metal cored? They appear very solid.
Thank you! So are the water tight doors metal cored? They appear very solid.
|
By
james Hosford
·
#42216
·
|
|
Re: [Amel Yacht Owners] Rigging
Get out your magnifying glass and get in the rigging. Then come down and do a walk around, magnifying the intersection of cable and swage. Take your time. Systematic evaluation. Music and a beverage
Get out your magnifying glass and get in the rigging. Then come down and do a walk around, magnifying the intersection of cable and swage. Take your time. Systematic evaluation. Music and a beverage
|
By
Porter McRoberts
·
#42215
·
|
|
Re: [Amel Yacht Owners] Volvo air filters / diesel filters
I was able to find Volvo air filters on eBay for 49$. Worth a look.
Porter
Ibis 54-152
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
I was able to find Volvo air filters on eBay for 49$. Worth a look.
Porter
Ibis 54-152
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
|
By
Porter McRoberts
·
#42214
·
|
|
Re: [Amel Yacht Owners] Interior wood quality
The woodwork on our boat is also of impeccable quality. The original owner was fanatical about keeping it from getting sun bleached, and thus the only area that is in less-than-excellent shape is
The woodwork on our boat is also of impeccable quality. The original owner was fanatical about keeping it from getting sun bleached, and thus the only area that is in less-than-excellent shape is
|
By
Ryan Meador
·
#42213
·
|
|
Surveyor in France
Hello
This is my first post in this group and I just want to start by saying hello to everyone.
I'm planning to buy an Amel Santorin and are currently looking at one located in Vannes. I would
Hello
This is my first post in this group and I just want to start by saying hello to everyone.
I'm planning to buy an Amel Santorin and are currently looking at one located in Vannes. I would
|
By
s90.simon@...
·
#42212
·
|
|
Re: [Amel Yacht Owners] Interior wood quality
Hi Jay,
My 54 is from 2006. The bulkheads are all veneered marine ply. The varnish is perfect. The doors are all perfect, actually all the woodwork below is perfect but for a few scruff marks on
Hi Jay,
My 54 is from 2006. The bulkheads are all veneered marine ply. The varnish is perfect. The doors are all perfect, actually all the woodwork below is perfect but for a few scruff marks on
|
By
ngtnewington Newington
·
#42211
·
|
|
Re: [Amel Yacht Owners] Rigging
Hallo thanks to all
I hope I See you some were Heinz
Fair winds
Von: amelyachtowners@...
Gesendet: Mittwoch, 19. September 2018 04:13
An: amelyachtowners@...
Betreff: Re: [Amel Yacht
Hallo thanks to all
I hope I See you some were Heinz
Fair winds
Von: amelyachtowners@...
Gesendet: Mittwoch, 19. September 2018 04:13
An: amelyachtowners@...
Betreff: Re: [Amel Yacht
|
By
Heinz Stutenbaeumer
·
#42210
·
|
|
Re: Voting from Martinique
We've successfully voted in the last two elections from Greece and from Turkey.
You can download and fill in the Federal Absentee Write-In Ballot form and mail it to your Elections' Officiel where you
We've successfully voted in the last two elections from Greece and from Turkey.
You can download and fill in the Federal Absentee Write-In Ballot form and mail it to your Elections' Officiel where you
|
By
Gary Wells
·
#42209
·
|
|
Re: [Amel Yacht Owners] Removing drawer faces
Craig,
It’s not stuck, my SN96 has two false drawers as well. I too wanted to convert one to a third drawer.
Ian
Ocean Hobo
Craig,
It’s not stuck, my SN96 has two false drawers as well. I too wanted to convert one to a third drawer.
Ian
Ocean Hobo
|
By
Ian Park
·
#42208
·
|
|
Re: [Amel Yacht Owners] Removing drawer faces
That would have been great to meet up.
Yes we met her. We hit a couple of anchorages together on our crossing from Natunas Islands to Borneo. She was a lovely cheerful person.
Regarding the lower
That would have been great to meet up.
Yes we met her. We hit a couple of anchorages together on our crossing from Natunas Islands to Borneo. She was a lovely cheerful person.
Regarding the lower
|
By
tfortner1975
·
#42207
·
|
|
Re: [Amel Yacht Owners] Removing drawer faces
Hey, thanks Trevor,
Isn't that odd that our SN68 has only two drawers while your SN27 has three? Makes me wonder if maybe my lower middle drawer is just stuck - that would be weird to discover after
Hey, thanks Trevor,
Isn't that odd that our SN68 has only two drawers while your SN27 has three? Makes me wonder if maybe my lower middle drawer is just stuck - that would be weird to discover after
|
By
Craig Briggs
·
#42206
·
|
|
Re: mizzen furler failure
Ryan,
Search the photos section under "SM Mizzen Gearbox" and you will see how your piece integrates with the mizzen gearbox.
Derick Gates
SM2K #400 Brava
Ryan,
Search the photos section under "SM Mizzen Gearbox" and you will see how your piece integrates with the mizzen gearbox.
Derick Gates
SM2K #400 Brava
|
By
Derick Gates
·
#42221
·
|
|
Re: mizzen furler failure
Ryan,
I had the same problem on Brava. The piece in your picture had frozen up, and I needed to take it to a rigger. The rigger was able to remove the inner tube from the outer tube, and clean and
Ryan,
I had the same problem on Brava. The piece in your picture had frozen up, and I needed to take it to a rigger. The rigger was able to remove the inner tube from the outer tube, and clean and
|
By
Derick Gates
·
#42205
·
|
|
Re: [Amel Yacht Owners] Removing drawer faces
Hi Craig,
No access for us. But this is what I’ve found:
- On SN27 we have 4 drawer faces port side. 3 are actual drawers. The most forward one is fake. I’ve tried to figure out how to gain
Hi Craig,
No access for us. But this is what I’ve found:
- On SN27 we have 4 drawer faces port side. 3 are actual drawers. The most forward one is fake. I’ve tried to figure out how to gain
|
By
tfortner1975
·
#42204
·
|
|
Re: [Amel Yacht Owners] Interior wood quality
Thank you.
By
james Hosford
·
#42203
·
|