we would take 5 in Aluminium or ABS, whatever the rest takes. thx, Herbert Tadeja and Herbert KALI MERA SN120 Panama, Shelter Bay

Put us down for 10 aluminum. Ian & Margaret S/V Loca Lola II SM153 Fort Lauderdale, Florida, USA

Kent, Would these handles come with the mechanism , I assume not. I need to replace the plastic part or find the little springs . Thanks, Pat SM#123

12 mm kevlar is it.... sans acune doubt Thanks Bill for the confirmation Cheers Alan Elyse SM437 Port Vila, Vanuatu

Do you still want 10 in the black ABS, Philipp? Kent Robertson S/V Kristy

I’ve added you to the order for 10 Paul. Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819

I will contact Maud. Kent “

John, This thread started with my asking Maud for the handles. She said they are no longer available and that she would not be willing to tell me who the original supplier was so that I could contact

We would be interested in 10 aluminum. Dan SM116

Miles, For any of the main outhaul, traveler or jib car control lines Kevlar, Spectra or Vectran core line is essential. Stretch is the enemy of performance in this application. I tried 10mm OD Kelvar

When I first bought Elyse I had real issues with the outhaul line... The previous owner had 10mm polyester installed. I changed it to 12mm polyester as per Andersen recommendations. That was

Hi Bill, One difference that may explain the difference is that Amel uses Kevlar line. I think that it does not compress as much and that may be why it works well. Regards, Miles s/y

I’m still in for 20 whether it be black ABS or aluminum. Steve Aloha SM 72 Hawaii

We can taken10 as well, sooner or later they will brake and then good to have a few spare. Assume we prefer aluminum but not essential Paul on SY Kerpa SM 259

Thank you Eric. Regards Alin

Hi Kent, that will be great. see you down here some time Kind Regards Danny

Craig, The tool that I own is the Fluxeon 1800 watt model. You should be able to view it here: https://fluxeon.com/products/ You can use a lot of different types of coils with this type unit,

Will do Craig, Thanks Kent Hi Kent, You can kick my order up to 10 if it helps get to the minimum of 100 total. Craig

James, you may have already posted this, but what Amel model and number, and what engine do you have? Are you repowering or just replacing the mounts? The original mounts in my SM 243 for Volvo TMD22