+ Recently noticed Automatic Transmission Fluid under and on the aft end of the shaft brake after motoring. The fluid seems to be coming from the around the adjustment bolt on the brake. I've

Kent, I anchored in 30 meters in Bora Bora at 3:1 scope. We were there for several days with winds in the high 30s-low 40s. The scope required to safely anchor can decrease as the depth increases.

Wow, guess I’ve got to devise a good way to add rode to my 300 ft of chain. Is 250 ft of 1 inch rode on 300 ft of chain enough? That’s less than 6:1. There was some discussion a while back, but

Hi Kent, the question was not to me but I have fond memories of time there. I spent a lot of time anchored in 27 meters (90 ft). Kind Rgards Danny SM 299 Ocean Pearl

That’s a mighty nice anchor you’re giving up, Bob. I wouldn’t trade mine for anything. I see Gallivant is in Raiatea. What kind of anchorage depths are you finding down there? Kent S/V

The 303 product range is the best I know of for that, but sadly I know of no magic except CorrosionX, which BTW is made in Texas😀 Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel

Bill! Is there any Magic “corrosion X” type product to use to avoid mold? Treatment with white winneger? Or.... Paul

Thank,s will try that Paul

Paul, et al, I offer my comments for everyone as a former insider in the furniture business: Sunbrella is made from 100% solution dyed acrylic. Solution dyed means the fibers are dyed before the

Paul Our entire cockpit is covered with sunbrella. My experience is that a bleach based spray cleaner will fade and remove mildew stains within an hour... the maker of the cockpit enclosure told me

I have a used anchor for sale in St. Thomas. Rocna 40 kg, 88 lb. galvanized. There are a few small spots of rust. Mostly in very good condition. I will deliver to your boat in St. Thomas. $900. or

Hi Paul, Best thing I've found is 303 Fabric Guard. They make a mold and mildew cleaner and multipurpose cleaner, too. It's expensive, but it's what every body who sells Sunbrella recommends. Once

We have some issues with our spray hood and bimini made from Sunbrella (3 years old). It has developed a lot of stain from mold and now it starts to leak in water especially around the supporting SS

I am sure than 12mm vectran is perfect for those tasks. Regrettably, many of these fibers are trademarked brands and it is near impossible to compare apples to apples. Best, CW Bill Rouse Admiral,

I was told that they are available from Amel now, as I had inquired several months ago and Maude just got back to me in July indicating the price and availability. Not sure how many she had. Due to

Kent, The safety pin is a good idea, I will try that,as I have been unsuccessful finding the springs locally. If these handles were done in aluminum ,they could be painted with a chrome finish as well

Found out some interesting things : 1. I thought Vectran was kevlar...it's not 2. Spectra and Dyneema are basically the same and both exhibit creep i.e they will stretch permanently under load. 3.

If it works, I would like a complete set - 4 pieces, please also. Best Alan Elyse SM437

The prices I’ve gotten from my 3D printer and from Mark are for the handles only. The printer has offered to do the 3D design work for the latch mechanisms for free and will get us a price for the

Alan, I suggest 12mm Dyneema core double braid Polyester outer cover. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720 Winnie St Galveston Island,