For how long John? I am thinking a double double racor would be the way to go. What’s the internal rail diameter on these engines? Should not the last filter be smaller that the rail? New long

Hello Amel owners, I know from discussions that many of you use Micron 66 bottom paint in the Caribbean. I'm looking for responses from those with specific experience. I put 2 coats on the bottom of

Alan, You should be able to find CruiseRO Water and Power on the internet. Try this link. http://blog.cruiserowaterandpower.com/can-i-run-a-marine-water-maker-in-fresh-or-brackish-water/ He very

Hi Alan, Great! Thank's very much for this good link. I will order there. Fair winds. Philipp #124 SM/ Félicie

Yes, Kent, that's what was pointed out - OK in fresh water if you don't exceed rated fresh water flow, not that you need to watch the high pressure. Just that it will be much lower than with salt

Same problem in the head. ---In amelyachtowners@..., <karkauai@...> wrote : I got a strap with hooks on either end from George and Kim on Indecent several years ago. They got it fromWest Marine. I

Hi All, with our TAMD22 we ran a 2 micon Racor without issue. John SV Annie SM #37 Le Marin

Per-Erik Thanks Visit Sweden soon for a short while, it is rather big for my hand luggage :) But at least I can have a look at it and try it. Paul

Hi Alan I know from my former Boat's Watermaker. After using a while it helped the performance a lot by cleaning from time to time with extra cleaning cartridges. What I know; Freshwater under

Hello Philipp Go here https://www.marineenergy.com.au/products/an-2052-impeller Cheers alan elyse sm437 ---In amelyachtowners@..., <philipp.sollberger@...> wrote : Dear Amelowners and Experts from

When I look in my manual (thanks to others!) there is a whole page of approved fluids, and the only common theme is ATF So my guess is that any ATF will do, after all we don't subject our

Dear Amelowners and Experts from old Super Maramus, I have an ONAN MDKD-P (6.5 KW) and I'm looking for a documentation concerning the service operations and the order numbers for spare parts for

Hi Eric, In New Zealand..I posted a reply about that..it's available in Sweden also it seems...probably, certainly made in China , it should be available everywhere...and yes, it is a great seat, very

Thomas, I have the VOLVO D3 110H version; which I usually run between 1150 and 1300 RPM; burning about 2.5 lph at these rpm’s. During engine sea trial in June 2018, with 6 people on board, this

Reudi, You should have two filters A Racor primary filter (or 2) ,mounted on the bulkhead and a secondary filter mounted on the engine. The primary filter is there to filter out gross contaminants

Thomas and Bill Good points. I’m still learning to handle a modern Diesel Engine. Maybe it is better to go for 1-2 micron Racor filter instead of the recommended 10 micron in order to filter out

I understand where you are coming from Pat. So long as you go into it with your eyes open. I have often thought of getting molded padding bottom sides and back while retaining the stability and grab

Hi Paul Even if it is far away from where you are, they seems to have that chair in Erlandssons brygga home in

Hi Alan, Nice seat, Where did you get it? Fair Winds Eric Kimberlite Amel Super Maramu #376

RO membranes are rated for maximum pressure OR maximum flux of product water, whichever is reached first. If the feed water is nearly fresh, very low feed pressure (maybe lower than 100 PSI, 7 Bar)