Ryan, That looks like the same one we have onboard Harmonie, although I’d need to see the control panel to be sure. It is different than newer models in functionality. For example, it has a real

Joel, Thank you for confirming this is an Eno! I'm quite sure this is the original stove. I'll check out Fishery Supply. Jose, Sorry to hear your bad experience. I'll let you know if I find parts.

Hi all, I'm unsure of which model Dessalator is installed on my boat. I've attached a photo. The info on the label on the motor reads: Amel No 830042 Type MBT1141L 29V60l/h9848 It appears this is a

I finally got all my questions answered by the 3D printer in Annapolis. I sent pics and a sketch with dimensions, if we go ahead with this I will send him a pull from Kristy for him to copy exactly.

Pat, I replaced the boots on ours last year as there was salt encrustation around them and they had small cracks in the rubber surface. The heat exchanger itself appears fine, but I bought a spare and

Last time I saw then Mona Rae, it had an ENO stove. Looks like the same unit provided when I had the boat built for the previous owner. Fishery Supply used to have spare parts a year or so ago. JOEL

I use two Marco UP2/E pumps in parallel to have an installed spare. I have never seen us draw enough water to run both pumps together. They do run at a slightly lower set pressure than all the bigger

I guess the oil cooler has been for me , out of sight and out of mind, until it has recently come up. Should the cooler be an item routinely replaced every so many years. Mine is probably original and

-----Original Message----- From: Patrick Mcaneny To: amelyachtowners Sent: Wed, Jul 25, 2018 4:48 pm Subject: Re: [Amel Yacht Owners] trasmission oil cooler Should the replacement of the oil cooler

Hi Dean, whatever you do don't be tempted to do an overhaul instead of replacement. I got a "factory reconditioned" box from Italy. It lasted 7 hours.Then that was overhauled, lasted 12 hours. New box

Hi Ruedi, The Bowman DC60-XCC cooler with 3367 endcaps is available ex-stock at www.lancingmarine.com. Price is 65GBP, I bought one today! Ask for Mark, he’s very helpful. Cheers Dean Sent from

Should the replacement of the oil cooler on an older boat, be viewed as a necessary preventative item. Do they fail often ? It seems that if they do ,failure could occur without warning ,until after

Hi Bob, Yes attitude changes everything. Glad you got some encouragement from my fun with the vetus bushes in Tonga. I have never noticed a release of pressure when I remove the dip stick. I always

Transmission Oil Cooler - Bowman DC60-XCC/#3367 end caps Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720 Winnie St Galveston Island, TX

Duane, I am almost 100% sure you used the wrong pump and I am 100% sure the UP-3 is not magnetic, unless this is something that Marco made in the last 60 days. I recommend to Amel School Clients,

Many thanks, Alan ! Buon Vento Gianni sv EUTIKIA SM 428 https://www.youtube.com/user/eutikia1 ----Messaggio originale---- Da: amelyachtowners@... Data: 24-lug-2018 22.00 A: Ogg: [Amel Yacht Owners]

Dean, Hull #69, 2007 A54 has the correct dipstick. I distinctly recall adding 2L per the manual and noticing that it was low, so I added more. No tranny troubles, but I do have that rattle in the

Ryan, I had the same issue with the oven and I bought the part (it is a mercury filled and not a thermocouple) which I replaced and it worked fine... for a while. Unfortunately, I waited too long

Hi everyone I’d like to carry transmission cooler replacement as a spare. I think the rubber parts, etc. are a potential source of leaking over time and not easy to repair. Does anyone know where

Hi John, From some off-list conversations and additional digging on Nikimat's website, I now believe my stove is an Eno. Would you be able to share a photo of your Electrolux for