You could try disconnecting the engine start battery and see if the voltage drop continues. That would establish if the continuing volts drop is actually due to a dead battery or because there’s an

We're currently in a marina, on shore power with the battery charger on.. and the starter battery (2 year old Victron 110ah) has suddenly died - showing less than 2v! and reducing 0.01v every 5

Victor Hi, many thanks for the pictures. All the best Jarek Zemlo NOA BLUE

Ian, Here are a few things for you: You should not need to prime it, but you usually need to open a tap so air can escape. The accumulator tank should be set with the pump OFF and the system

Hello Ian, Last time I changed the fresh water pump i had to prime it. I just dropped water through the exit hose. You might have rust in the pressure tank going into the diaphragm. Envoyé de mon

Envoyé de mon iPhone

Our FEIT freshwater pump won’t stop cycling. I have tried: - adjusting cutin bolt spring - cleaning the diaphragm - changing out the D Squared switch - playing with contacts - sanding the brushes

Hello Jared. All I dd was to cut part of the fibre glass under de bow pulpit inox plaque. With just that centimeter in the aft part and also another cut of fibre and inox in the outer forward side,

Hello Jared. All I dd was to cut part of the fibre glass under de bow pulpit inox plaque. With just that centimeter in the aft part and also another cut of fibre and inox in the outer forward side,

Thank you Ian, I checked and I have not been able to see or find that ring, (I will dig a little deeper). Paul Guenette Aramis SM - 444 Comox, BC Canada

Victor Hi, Thanks and would appreciate if you could send some pictures of modifications done on the bow roller for fitting 45KG Ultra. Jarek Zemlo NOA BLUE

Martin, many thanks for the chain explanations. Best regards Jarek Zemlo NOA BLUE

Thank you Craig, Mark, Eric and Ian (and Alex). I really appreciate your help. I also have the extra alternator for generating power while under sail. It looks like I can remove it as one unit by

Hi Alan, I do have some turn on/off knobs. If you don’t pull the cover plate out when grilling you can melt these. I am currently offering all spares as part of the oven sale. Will let you know next

Hi Eric, Contact: connor_barry@... UK Cell: +44 7790 399900 Martinique Cell: +696 696 50 90 49 Best. Barry

Hi Barry, What is your email address? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Barry, I would love to get your spare parts especially the switches as a previous owner melted a couple of ours. Could you send me a picture of the spares so I can make sure they are the same.

I asked her for a quote for the parts to replace the standing on my Amel 55 and it was about 12k euros. FYI

Hello Jarek, our chain was delivered by WASI. I am not sure if they manufactured it in their company or if it was produced by Wälder. I think it was done by Wälder. We bought the chain in 2002 and

Hi Ian - glad it all worked out and appreciate the feedback. Craig -- SN68 Sangaris, Tropic Isle Harbor, FL