Seckin, Try SAV"at"amel.fr. I remember someone recently saying that they bought some from Amel. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720

Dear All; I wonder how can I find the AMEL font in the side of mu supermaramu? I need to renew the old stickers. Thanks in advance Seckin Barlas S/Y Hayat

Hi, here is what I did in order to control the installed tachometer: I bought this instrument https://www.conrad.de/de/drehzahlmesser-voltcraft-dt-10l-werksstandard-ohne-zertifikat-122624.html

Hi, Amel smartness has no limit ! I would like to open a new chapter of this game for our experts if they can help at identifying this rope. There are 2 shackles and quite special design so I

Hi Mark, I did it recently and after sales at Amel were really cooperative. You can write at sav(at)amel.com and ask for Maud but tell her that Maxime did the purchasing for us and is updated about

Thanks , Bill , It’s a brand new tacho , 300 hours . ( maybe made in China ! ) Ian

Duane My S2G is only getting "orders"... or in NMEA terms, it is only a listener, not a talker. Best - Daniel

Ian and Judy, I am really glad to hear that you feel you are making progress with solving your engine problem. I think that we are certainly lucky to have knowledgeable and helpful people like

Hi Mark, I believe that David Vogle on Perigee just replaced his. So you might want to reach out to him. It looked like the model you posted. He did have the luxury of having his stick down for new

According to my shop manual the maximum no-load speed is coded into the "setting code" on the injection pump. The manual says: The setting code on my engine is 2643H058BE/1/5150 which would

Eric, Believe it or not, the ball bearing in the Antal Main Boom Car are 1/4 inch (0.25 inch) in OD. Quite odd for an Italian made part! I had to replace the shackle on the car due to a crack so

Thanks, James, You may have seen my exchange with Bill. I think I may be getting somewhere. We've always had a great experience with our Autoprop which is spinning freely. I have been amazed that

Bill, Thanks. That's really useful. I find that in neutral it is now idling at 800 revs, which seems high; more importantly, it revs above 3,000--and that's without the throttle flat

Ian, Mechanical diesel injection pumps are actually all governor controlled. The throttle is actually controlling the setting of the speed governor, (sometimes called a "speed regulator") which in

Ian and Judy, Sorry, I don’t have the same engine but hopefully someone else will answer that question for you. In general, if your engine is reaching your normal full throttle loaded rpm in

Daniel, Thanks for your reply. So A = Positive and B = Negative. It can't hurt anything, if it doesn't work then I'll just reverse them. I was thinking in terms of feeding the S3g Autopilot Computer

Hi James, ( or anyone else ) If you are on board and have the same 75hp Volvo as I have, can you put on full revs in neutral and let me know what revs you reach ? Thanks, Ian and Judy, Pen Azen,

On the way to Bonaire, the combo steaming/deck light decidednot to play anymore and self destructed. Looking at the forum, it appears therewere a couple of models used by Amel. I have the original

James, Thanks. The mystery continues, but we have a mechanic recommended here so we will see what he has to say about it. Incidentally, there is a Volvo customer help line to which you can email an