I have uploaded the file into the Yahoo File space. Look for it there as: Amel Vector Logo.psd That is a photoshop format file with the logo as a vector shape. It should be printable at any size

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Amel Vector Logo.psd Uploaded by :

D, The Weatherfax antenna is the Triadic Stay.😀 -- Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720 Winnie St Galveston Island, TX

In chasing down all the wiring I've found three antenna cables in the aft head wire access (to the right of the mirror). They are: SSB DSC antenna Fax 30(Furuno Weatherfax) antenna AIS

I don't know if it's stock or not, but my boat has a pressure regulator downstream of both the pump and the accumulator. It's a tiny thing in between where the accumulator is spliced in and the line

I'd like one too, carlylelk "at" aol "dot" com. Duane Siegfried Wanderer, SM#477

I'd like to have it, too. This seems like something that would be a great candidate for uploading to the file store on the yahoo site, then everyone can have it at once and forever. Thanks, Ryan SM

Hi Bill, I’d love a copy if you don’t mind. Flyboyscd at gmail dot com. Thanks, Steve Davis Aloha SM 72 Ko Olina, Hawaii

Bill, I don't know what hell a "vector graphic file" is or looks like, but it sounds like it would help in getting one made , so please send it to me. Thanks Much, Pat SM#123

Billthanks, very grateful, can you share the file? Also we should use it Attilio Attilio & Maria Siviero Amel Santorin#84 "Sisila" in Leros Partheni Boatyard

Pat (or anyone else interested) If it would help, I have a vector graphic file of the Amel Logo that should be way easier for someone to work with than a photo. Bill Kinney SM#160, Harmonie Moraine

If same as the SM2K, then I have some... they were cheap. --------------------------------------------

Hi, If it is anything like the coupling on the Super Maramu, it is not a stock coupling. It is only available from Amel. Do you need the coupling or just the rubber inserts? Fair

Hi again Duane, I made a mistake with the housing measurement, the inside is not 25mm. The inside is 40mm. Regards Barry

Colin, With respect to just sealing the hole in a secure fashion with easily available materials. I would probably remove the rest of the damaged shaft and use two pcs. of 3/4” plywood (1” if

Check out the following link, it contains a bunch of info for Airmar products. I had similar questions. http://www.gemeco.com/st850.php Mark Mueller A54-68 Brass Ring Ft. Lauderdale, glued to the

Hi All, would anyone have the reference of the Vetus coupling on the 54? Many thanks Thomas GARULFO A54#122 Les Saintes, Guadeloupe

Hi Eric Thank you for your kind advice. I have since been in touch with both Amel, and Alexandre.' What a helpful forum this always is! Best regards Colin -- Colin Streeter 0411 016 445

The alternating hot/cold water problem is very common on many boats. The usual cause is the constantly changing water pressure when you have a on/off pressure switch on the supply pump. The

Good morning Paul, Congratulations for looking for an Amel! 3300 hours is “nothing” for a properly maintained Diesel engine. Personally I would stick with original equipment, it will be easier to