Oliver, Can you let me know which type of sensor was fitted to my SM200 # 278 ? Jose Ipanema SM 2K #278 Boston MA

Hi, Trevor, Too bad I had ordered the transducers without specifying the type. I still need to know which one is in my boat SM 278, which seems to be just about the time the straight sensors were

Thank you, Ian and Bill, for the info. Now I need to find out if the sensors I bought are the ones on my boat (the cable coming out straight vs at an angle which is what I was sold. I hope it is

Robins, what exactly did you put in for 30% less?? Are dimensions the same? Thanks, Alex Gesendet von Yahoo Mail auf Android

Try http;//fermi.jhuapl.edu/avhrr/gs/averages. From:amelyachtowners@... [mailto:amelyachtowners@...] Sent: Tuesday, May 22, 2018 10:21 PM To: amelyachtowners@... Subject: RE: [Amel Yacht

http://fermi.jhuapl.edu/avhrr/gs/index.html should work

I had the same problem and put a new Quick in - does the same job for approx. 30 % less. fair winds Robin Amel 54 #54 Carré d‘As Mallorca

Many thanks indeed Bill. Best wishes, Peter

Eric That one is a bit different, but the Navy has changed things, even restricted some sites.. I have patted myself on the back when a cold eddie moved me faster than thru Hell’s gate and the

Peter, I hope that you enjoy your "retirement" from PURE MAGIC. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720 Winnie St Galveston Island, TX

Dear Amelians, My cockpit anchor windlass control didn't count the rode anymore ca. 2 months ago. We changed the magnets at the windlass, but that didn't help. Now I can't even operate theb

Fellow Amel owners, Having owned Pure Magic for fourteen years, and having covered over eighty thousand thoroughly enjoyable miles on her, we have now passed her on to a new owner who hopefully will

thanks everyone for the responses. Got it fixed based on your valuable information! On Tuesday, May 15, 2018,

This is a really helpful post. Removes a lingering question mark as to how to do that when it will need to be done. Thank you Ian and Judy Porter and Helen S/V Ibis 54-152 Colon, Panama

Thanks Dan, I was going to try something like that and see if I can work through a small access hole. The hole saw is a good idea, not much repair work replacing the hole that was cut out. Kent Kent

The two links that you sent to me do not work.

Rick, Were you referring to this? Fair Winds Eric Kimberlite Amel Super Maramu #376 https://ecowatch.ncddc.noaa.gov/JAG/Navy/

Or read his book: An Inexplicable Attraction: My Fifty Years of Ocean Sailing Best Regards Teun AMELIT 54 #128 NOUMEA NEW CALEDONIA May 23, 2018 09:47:52

Bill, Thank you for the compliment. The gulf stream is such an odd thing with the eddies cold and hot and the eddies that are not on any chart far south of the stream. If you really want to

Eric, It is a pleasure and of great value to have someone with your experience in our Group. I am sure that few people have encountered the Gulf Stream on north/south/north passages from NY to the