I do. Best Regards Teun SV AMELIT A54 #128 In Storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA January 6, 202112:42:39 USA cell: +1 832 477 8842 AUSTRALIA cell: +61 5951

I guess that is 20.00 GMT not 0800PM GMT? Peter Forbes The Old Rectory Farnham Blandford DT11 8 DE 00447836 209730 07836 209730

Thanks, Tilo! ~~~⛵️~~~Matt

Hi Matt, Here are the links to the meeting that we’ll have with Olivier: Topic: AYOG January Gathering: An Amel Survey by Olivier Beauté Time: Jan 16, 2021 08:00 PM GMT Join Zoom

Can you repost the Olivier particulars? I missed that. Thx, ~~~⛵️~~~Matt

This Zoom meeting is confirmed. The last time Jimmy Cornell made a presentation to our group we had over 1200 total Amel Owners and Amel Enthusiasts view the meeting. Don't forget Olivier Beaute is

Tentative ZOOM - Jimmy Cornell - Pacific Voyage Planning When: Saturday, 13 February 2021 20:00 to 21:00 (UTC+00:00) UTC Organizer: Bill Rouse BROUSE@... 4093563221 An RSVP is requested.

Craig I’m in bed at home working this week. Back on Trippin Saturday hopefully setting sail for St Thomas on Sunday Cheers

So, Courtney, it's going down to 41° F / 5°C tonight in Brunswick! Brrr. Give it a try and it will: 1 - clear and burn out any dust in the burner and ducts, 2 - freshen up the diesel fuel in the

Hi Eric I do but have never used it. Cheers 🥂 Courtney svTrippin 54#101 Brunswick

Hi , Does anyone in the group have a heater installed by the factory in an Amel 54? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Ben, I think the main halyard idea is your best solution at this time. What you are missing is two spinnaker halyards that should be running to the top of the mast. While you are up repairing the

We have a ZF-25 2.0 transmission, the service manual states: 3.5 Sailing or moving in tow Rotation of the propeller while the boat is sailing, being towed, or anchored in a river, as well as

I really like the Blue Sea 1841 M2. I would place the last one on the transmission, not the C-Drive. Please send me photos of the installation to brouse@... Bill

The main mast halyard passes through the mast and is attach to a metal railing around 5 feet from the bottom of the mast where the rope ends with no spare to give. So to us that solution, i need to

How about dropping the mainsail and using that halyard?

Good afternoon Amel community. I’ve purchased an amel Maramu 46 and slowly learning the basics of it. While sailing yesterday the jib sail halyard snapped and I need to replace it. My problem is

I recently bought and installed the Blue Sea 1841 M2 temp sensor. I feel like this data is so important that I removed one of my passive VHF speakers in the cockpit and placed it facing me. Question

Thanks for that, Danny. I was told the same thing by Yanmar. However, I am reluctant to repeat it because I assume it will depend on the transmission installed on the engine. And to further confuse

Hi Bill, Volvo recommend either freewheeling or in gear. However care needs to be taken that either forward or reverse gear is selected depending on which firmly stops the spinning, the wrong one