|
Re: [Amel Yacht Owners] Re: lifting with mizzen boom, climbing mizzen, and halyard lengths
Whenever I go up the mast, I trail a static line attached to my harness that I can fix to the mast if I need to descend in the case of some problem that mandates coming off the winch system. (deck
Whenever I go up the mast, I trail a static line attached to my harness that I can fix to the mast if I need to descend in the case of some problem that mandates coming off the winch system. (deck
|
By
James Cromie
·
#38986
·
|
|
Re: My first bow thruster service...
Hi Bill,
I'm also servicing my bow thruster for the first time. Wondering how yours went and whether you decided to use RTV everywhere?
I'm also trying to figure out what the proper size is for the
Hi Bill,
I'm also servicing my bow thruster for the first time. Wondering how yours went and whether you decided to use RTV everywhere?
I'm also trying to figure out what the proper size is for the
|
By
Mike Longcor (SV Trilogy)
·
#38985
·
|
|
Re: [Amel Yacht Owners] engine / cdrive adjustments?
By
eric freedman
·
#38984
·
|
|
Re: [Amel Yacht Owners] engine / cdrive adjustments?
Hello Phil!
During our circum navigation I had to install a new engine here in New Zealand. Now I do have a vibration on idle speed and on 1800 rpm. It doesn’t matter if the boat is in gear or out
Hello Phil!
During our circum navigation I had to install a new engine here in New Zealand. Now I do have a vibration on idle speed and on 1800 rpm. It doesn’t matter if the boat is in gear or out
|
By
snw7tgmcrs6nmg5mdg55r3xpowhzm3kjxc2uqysc@...
·
#38983
·
|
|
Re: [Amel Yacht Owners] Re: Airmar P79 Installation
Bill,
Thanks.
Fair Winds
Eric
Bill,
Thanks.
Fair Winds
Eric
|
By
eric freedman
·
#38982
·
|
|
Re: lifting with mizzen boom, climbing mizzen, and halyard lengths
Ian,
I hadn't tried to tie a prusik around the mast, good idea!
One other way to tie yourself on to the dynamic line (the one going to a winch) is to tie a figure 8 with a three foot tail, put the
Ian,
I hadn't tried to tie a prusik around the mast, good idea!
One other way to tie yourself on to the dynamic line (the one going to a winch) is to tie a figure 8 with a three foot tail, put the
|
By
Duane Siegfri
·
#38981
·
|
|
Re: [Amel Yacht Owners] Re: Airmar P79 Installation
Eric,
https://buy.garmin.com/en-US/US/p/88672
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832)
Eric,
https://buy.garmin.com/en-US/US/p/88672
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832)
|
By
CW Bill Rouse
·
#38980
·
|
|
Re: [Amel Yacht Owners] Re: Airmar P79 Installation
Hi Colin,
What is a p79?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Hi Colin,
What is a p79?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#38979
·
|
|
Re: [Amel Yacht Owners] Re: Airmar P79 Installation
Hi Duane
We placed a P79 in the fwd cabin, right up front under the floor - off centre to the Stbd side as an extra backup (and/or early warning which travelling slowly fwd into shallower water as it
Hi Duane
We placed a P79 in the fwd cabin, right up front under the floor - off centre to the Stbd side as an extra backup (and/or early warning which travelling slowly fwd into shallower water as it
|
By
Colin - ex SV Island Pearl
·
#38978
·
|
|
Re: [Amel Yacht Owners] lifting with mizzen boom, climbing mizzen, and halyard lengths
Ryan,
Good points. I think two lines can be better than one line and a static line except in the situation where you only have a total of two crew members: 1 to go up and 1 to hoist.
And, the one
Ryan,
Good points. I think two lines can be better than one line and a static line except in the situation where you only have a total of two crew members: 1 to go up and 1 to hoist.
And, the one
|
By
CW Bill Rouse
·
#38977
·
|
|
Spare Parts list / outside bulbs for SM2K
Hello SM2K owners,
As some of youalready knows I bought some weeks ago a SM2K.
Now I would like toknow the required spare parts. Would you pls share your spare parts list withme to get a
Hello SM2K owners,
As some of youalready knows I bought some weeks ago a SM2K.
Now I would like toknow the required spare parts. Would you pls share your spare parts list withme to get a
|
By
olaf_renos@...
·
#38976
·
|
|
Re: [Amel Yacht Owners] Re: PredictWind
Colin, That is the kind of experience with it I was looking for. Their support seems good , I have not signed up yet but they offered me the professional version to use for a couple of weeks to
Colin, That is the kind of experience with it I was looking for. Their support seems good , I have not signed up yet but they offered me the professional version to use for a couple of weeks to
|
By
Patrick McAneny
·
#38975
·
|
|
Re: [Amel Yacht Owners] lifting with mizzen boom, climbing mizzen, and halyard lengths
Danny,
I will second your concerns about using external halyards, I avoid them as well and this started even before the incident described to follow: I once had the swivel of a spinnaker halyard
Danny,
I will second your concerns about using external halyards, I avoid them as well and this started even before the incident described to follow: I once had the swivel of a spinnaker halyard
|
By
James Alton
·
#38974
·
|
|
Re: [Amel Yacht Owners] Re: lifting with mizzen boom, climbing mizzen, and halyard lengths
I prefer to use two halyards, both of them for hauling (no static line). I don't see the advantage of using a static line vs just putting the prussik around the mast, so I use the line the way a
I prefer to use two halyards, both of them for hauling (no static line). I don't see the advantage of using a static line vs just putting the prussik around the mast, so I use the line the way a
|
By
Ryan Meador
·
#38973
·
|
|
Re: lifting with mizzen boom, climbing mizzen, and halyard lengths
If I can’t use two halliards to ascend the mast I take two long loops of either tape or 8mm rope. A Prussik loop round the mast can be pushed up but holds under the tension of a fall. The second one
If I can’t use two halliards to ascend the mast I take two long loops of either tape or 8mm rope. A Prussik loop round the mast can be pushed up but holds under the tension of a fall. The second one
|
By
Ian Park
·
#38972
·
|
|
Re: Just a bit off topic, but worth saying...
Welcome aboard Brent. I was in your shoes just 18 months ago. You will not regret buying an Amel. Hope to meet you somewhere in the world! (note not many owners forums can say that and mean it.
Welcome aboard Brent. I was in your shoes just 18 months ago. You will not regret buying an Amel. Hope to meet you somewhere in the world! (note not many owners forums can say that and mean it.
|
By
John Clark
·
#38971
·
|
|
Re: [Amel Yacht Owners] Re: PredictWind
We use the PW professional package with ocean currents included, and have found this excellent in crossing the North Indian Ocean from Thailand to Maldives. In particular it was spot on for ocean
We use the PW professional package with ocean currents included, and have found this excellent in crossing the North Indian Ocean from Thailand to Maldives. In particular it was spot on for ocean
|
By
Colin - ex SV Island Pearl
·
#38970
·
|
|
Re: Oceanair Skyscreen
The aft cabin hatch is a bit tough because there is not much space above the hatch for the screen frame. The Oceanair frame is wider on the sides with the rollers so you want them vertical, and the
The aft cabin hatch is a bit tough because there is not much space above the hatch for the screen frame. The Oceanair frame is wider on the sides with the rollers so you want them vertical, and the
|
By
Duane Siegfri
·
#38969
·
|
|
Re: Oceanair Skyscreen
By
Duane Siegfri
·
#38968
·
|
|
Re: lifting with mizzen boom, climbing mizzen, and halyard lengths
Ryan,
One other thing I wanted to add: never use any hardware on the end of the halyard to attach yourself. Always tie a figure 8 knot that leaves a bight on the end of the line. You can leave the
Ryan,
One other thing I wanted to add: never use any hardware on the end of the halyard to attach yourself. Always tie a figure 8 knot that leaves a bight on the end of the line. You can leave the
|
By
Duane Siegfri
·
#38967
·
|