Steve, We are away from our boat at the moment, so I can not measure, but it is obvious that the two sides should be the same. I would say having them NOT match means they were done by eye instead

Porter, We have been with Pantaenius America for 3 years, and did see a jump this year of about 20%. Our premium cost per insured dollar value is almost identical to what you were quoted. The big

Gerhard, This has been a popular topic recently. It seems that this year many Super Maramus (mine included) have reached the age where the plywood in the chain locker reached the end of its useful

Hi Duane. We had a similar problem and in the end it was the wire connection to the speaker. So we were transmitting but didn’t realise it because we heard no reply. The simple solution in our

Dear Mr. Baileys and Danny I don't like that you use this forum as an add and marketing platform. Insurance are different by countries. Mr. Baileys; you mentioned that we need an avocate at claim?

Miles, If no one provides it soon, I can get you the measurement when we get back aboard Air Ops in about two weeks. In the meantime I can tell you that we have stored our Aquapro 10’ inflatable

HiPorter; Ouragent based out of Florida has provided us with a more competitive option than you have received through Lloyds of London. If you are interested, please sendme a private e-mail and I

Porter, Insurance is something that changes like the wind. You might try Velos Insurance UK. UK Tel: + 44 20 7929 4058 Insurance"at"velosgroup.co.uk They'll be good for you, except not in US

This is really great information Thank you!: Especially since Jack Martin can only come up with one quote for our boat starting April: Pantaenius America. Its 10k we were paying 6k with Falvey

Yup it's "B" size on Elyse SM437....it has nothing to do with the Yanmar engine of course, its the diameter of the prop shaft from the C-drive that determines it's size. Most 54's don't have Yanmar

We are hopefully’owners to be’ :) Living in Greenland saving for the Super Maramu has a bigdisadvantage. It is quite difficult to go ‘boat-shopping’ from the arctic! Wehave planned an Easter

Please have them look up Kimberlite, They said it was a standard line cutter. It is for the shaft that goes with the Yanmar Engine. I am almost sure it is a “B” size I have rebuilt it at

On Feb 19, 2018, at 6:05 PM, Stephen Morrison steve_morrison@... [amelyachtowners] <amelyachtowners@...> wrote: Hello all. I recently had Nance and Underwood install new standing

Hello all. I recently had Nance and Underwood install new standing rigging here in Florida and noticed that the height of the pole support on the shrouds varied noticeably. I was also on another Amel

Our VHF has a history of not working for completely inexplicable reasons. It will receive but will not send, even at very close ranges. It will work for a time and then not work for a time. Thank

Hi all, The depth reading on the FFD flashes "CAL" alternating with the depth readout. The manual says this will happen after a system reset or as a result of the internal battery is exhausted.

Miles, Sorry, I am not on my boat currently so I cannot provide the measurement that you need at this time. I did want to wish you luck with your plans to section your 10’ Falmouth Punt and try

Hello Bob, Here are my Spurs invoices. You will see the ship name and my name. You will also see 1.1/2” Type B. Complete unit May

Hi All, I received a personal email asking the name of the insurance company that disappointed us. It was Haven Knox Johnson, a Lloyds of London Company. The broker was The Marina Shop of Opua NZ and

Hello fellow Maramilians ! I’m in the process of building a 10ft grp dinghy. Sailing rowing and motor is the plan It’s for the kids really but I’m hoping we can use it almost exclusively