|
Re: [Amel Yacht Owners] Re: An update on our Firefly Batteries.
Bill,Thanks for the link to the informative update on your Firefly batteries. These batteries certainly sound promising.
James Alton
SV Sueño
Maramu #220
Bill,Thanks for the link to the informative update on your Firefly batteries. These batteries certainly sound promising.
James Alton
SV Sueño
Maramu #220
|
By
James Alton
·
#38116
·
|
|
Re: [Amel Yacht Owners] Condensation on bottom of freezer?
Can you better describe which freezer and exactly where...inside or outside?
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island,
Can you better describe which freezer and exactly where...inside or outside?
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island,
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#38115
·
|
|
Re: [Amel Yacht Owners] Amel owner saying goodbye
Dear Rafael,
I think you need to tell the Group “your” story about the insurance.
We have the same insurance Helvetia contracted through de Lassee and I really think every Amel owner should know
Dear Rafael,
I think you need to tell the Group “your” story about the insurance.
We have the same insurance Helvetia contracted through de Lassee and I really think every Amel owner should know
|
By
Alexandre Uster von Baar
·
#38113
·
|
|
Re: [Amel Yacht Owners] Re: Bow Thruster won't come up
Way to go! I admire your tenacity. Even though I would have liked to see you in March. I wouldn't have like to see you in March. Get going already.
Best of luck and safe sailing.
Chuck
Way to go! I admire your tenacity. Even though I would have liked to see you in March. I wouldn't have like to see you in March. Get going already.
Best of luck and safe sailing.
Chuck
|
By
Chuck_Kim_Joy
·
#38112
·
|
|
Condensation on bottom of freezer?
I'm having a lot of condensation on the bottom of the freezer. It's winter here in Georgia with humidity in the 60 to 85% range, and temperatures in the 50's and 60's. Water temp is right there as
I'm having a lot of condensation on the bottom of the freezer. It's winter here in Georgia with humidity in the 60 to 85% range, and temperatures in the 50's and 60's. Water temp is right there as
|
By
Duane Siegfri
·
#38111
·
|
|
Re: Bow Thruster won't come up
After taking the control box apart and tracing all the wires down, I finally figured out that we had two problems. First the "UP" limit switch was dead.
But then after replacing it the actuator that
After taking the control box apart and tracing all the wires down, I finally figured out that we had two problems. First the "UP" limit switch was dead.
But then after replacing it the actuator that
|
By
Duane Siegfri
·
#38109
·
|
|
Re: Amel owner saying goodbye
Very sad story, I hope you find an other deram to live.
Paul on SY Kerpa SM 259
Very sad story, I hope you find an other deram to live.
Paul on SY Kerpa SM 259
|
By
Paul Osterberg
·
#38114
·
|
|
Re: Spurs Line cutter
AlexandreWish I was in the Caribbean, but stuck in Lagos Portugal.Not to bad but longing back to Kerpa and sailing again
Paul
AlexandreWish I was in the Caribbean, but stuck in Lagos Portugal.Not to bad but longing back to Kerpa and sailing again
Paul
|
By
Paul Osterberg
·
#38107
·
|
|
Re: [Amel Yacht Owners] NIKIMAT Illustrations & Parts for sale (SWIM LADDER)
Good afternoon Eamonn,
No worry about making a ladder in Greece!
Mine is only interesting for people that are in the Caribbean!
Definitely agree with you on the choice of aluminum!
I know about the 2
Good afternoon Eamonn,
No worry about making a ladder in Greece!
Mine is only interesting for people that are in the Caribbean!
Definitely agree with you on the choice of aluminum!
I know about the 2
|
By
Alexandre Uster von Baar
·
#38106
·
|
|
Re: [Amel Yacht Owners] Spurs Line cutter
Hello Paul,
Here is the invoice for mine:
http://www.nikimat.com/factures/2015_03_18_spurs_2.jpg
Size “B” 1 1/2 “ (1.5 inch)
If you were in the Caribbean, you could purchase my spare for 80%
Hello Paul,
Here is the invoice for mine:
http://www.nikimat.com/factures/2015_03_18_spurs_2.jpg
Size “B” 1 1/2 “ (1.5 inch)
If you were in the Caribbean, you could purchase my spare for 80%
|
By
Alexandre Uster von Baar
·
#38105
·
|
|
Re: [Amel Yacht Owners] Spurs Line cutter
Thank you Pat
Got the info 35 mm size B
Paul
Thank you Pat
Got the info 35 mm size B
Paul
|
By
Paul Osterberg
·
#38110
·
|
|
Re: SM stern bumper paint
I try it in spring with folie
When it is reddy i will recomande
Best
Elja SM Balu 222
I try it in spring with folie
When it is reddy i will recomande
Best
Elja SM Balu 222
|
By
eljaroellinghoff@...
·
#38104
·
|
|
Re: [Amel Yacht Owners] Spurs Line cutter
On SM Balu 222 the diameter is 35 mm
On SM Balu 222 the diameter is 35 mm
|
By
eljaroellinghoff@...
·
#38103
·
|
|
Amel owner saying goodbye
Dear friends AMEL owners
Probably this will be the last email that I send and I will withdraw from the group.
The reason is that Hurricane Irma destroyed my Amel SM2k and it will be impossible for
Dear friends AMEL owners
Probably this will be the last email that I send and I will withdraw from the group.
The reason is that Hurricane Irma destroyed my Amel SM2k and it will be impossible for
|
By
rcavie <no_reply@...>
·
#38108
·
|
|
Re: [Amel Yacht Owners] Spurs Line cutter
Paul, If someone does not provide the info you need, I can stop by your boat sometime next week and take a measurement for you.
Pat
SM Shenanigans
Paul, If someone does not provide the info you need, I can stop by your boat sometime next week and take a measurement for you.
Pat
SM Shenanigans
|
By
Patrick McAneny
·
#38102
·
|
|
Re: [Amel Yacht Owners] Spurs Line cutter
It is a B size just mention the name of my boat.
They have it on file at the factory in florida.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
It is a B size just mention the name of my boat.
They have it on file at the factory in florida.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#38101
·
|
|
Re: An update on our Firefly Batteries.
Since people asked for an update on our experience with our Firefly batteries, here is a link to what we have seen so far:
https://fetchinketch.net/boat-projects/battery-upgrade/
In summary, they are
Since people asked for an update on our experience with our Firefly batteries, here is a link to what we have seen so far:
https://fetchinketch.net/boat-projects/battery-upgrade/
In summary, they are
|
By
greatketch@...
·
#38100
·
|
|
Spurs Line cutter
Hello!
My Spurs Line cutter is broken. I'm not on the boat and need to know the measurement for ordering a new one, probably enough with the shaft diameter. Does anyone know that? Or if anyone know
Hello!
My Spurs Line cutter is broken. I'm not on the boat and need to know the measurement for ordering a new one, probably enough with the shaft diameter. Does anyone know that? Or if anyone know
|
By
Paul Osterberg
·
#38099
·
|
|
Re: [Amel Yacht Owners] NIKIMAT Illustrations & Parts for sale (SWIM LADDER)
Hi Alexander
I commissioned the fabrication of an aluminum copy in Greece in January, sorry about that. I have seen some SM with stainless steel replacement ladders, which are cheaper to make but 3
Hi Alexander
I commissioned the fabrication of an aluminum copy in Greece in January, sorry about that. I have seen some SM with stainless steel replacement ladders, which are cheaper to make but 3
|
By
eamonn.washington@...
·
#38098
·
|
|
Re: [Amel Yacht Owners] Jib Track Plugs
Vladimir,
Thank You,
Fair Winds
Eric
Vladimir,
Thank You,
Fair Winds
Eric
|
By
eric freedman
·
#38097
·
|