|
Re: [Amel Yacht Owners] Spurs Line cutter
It is a B size just mention the name of my boat.
They have it on file at the factory in florida.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
It is a B size just mention the name of my boat.
They have it on file at the factory in florida.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#38101
·
|
|
Re: An update on our Firefly Batteries.
Since people asked for an update on our experience with our Firefly batteries, here is a link to what we have seen so far:
https://fetchinketch.net/boat-projects/battery-upgrade/
In summary, they are
Since people asked for an update on our experience with our Firefly batteries, here is a link to what we have seen so far:
https://fetchinketch.net/boat-projects/battery-upgrade/
In summary, they are
|
By
greatketch@...
·
#38100
·
|
|
Spurs Line cutter
Hello!
My Spurs Line cutter is broken. I'm not on the boat and need to know the measurement for ordering a new one, probably enough with the shaft diameter. Does anyone know that? Or if anyone know
Hello!
My Spurs Line cutter is broken. I'm not on the boat and need to know the measurement for ordering a new one, probably enough with the shaft diameter. Does anyone know that? Or if anyone know
|
By
Paul Osterberg
·
#38099
·
|
|
Re: [Amel Yacht Owners] NIKIMAT Illustrations & Parts for sale (SWIM LADDER)
Hi Alexander
I commissioned the fabrication of an aluminum copy in Greece in January, sorry about that. I have seen some SM with stainless steel replacement ladders, which are cheaper to make but 3
Hi Alexander
I commissioned the fabrication of an aluminum copy in Greece in January, sorry about that. I have seen some SM with stainless steel replacement ladders, which are cheaper to make but 3
|
By
eamonn.washington@...
·
#38098
·
|
|
Re: [Amel Yacht Owners] Jib Track Plugs
Vladimir,
Thank You,
Fair Winds
Eric
Vladimir,
Thank You,
Fair Winds
Eric
|
By
eric freedman
·
#38097
·
|
|
Re: [Amel Yacht Owners] Jib Track Plugs
Eric,
I just checked my McMaster order.
The plug part number: 9545K115
Description on McMaster page:
Size 0 ; 17/32" x 21/32" OD
Without Holes.
Dimensions that I provided before are as measured.
Eric,
I just checked my McMaster order.
The plug part number: 9545K115
Description on McMaster page:
Size 0 ; 17/32" x 21/32" OD
Without Holes.
Dimensions that I provided before are as measured.
|
By
VLADIMIR SONSEV
·
#38096
·
|
|
Re: [Amel Yacht Owners] Re: 54 TV lift
Hi Alex
By bench did you mean the one at the back of the table on the port side? I removed the panels behind the cushions and could not find the box?
Thanks
Courtney
Trippin Amel 54 #101
Dr. J
Hi Alex
By bench did you mean the one at the back of the table on the port side? I removed the panels behind the cushions and could not find the box?
Thanks
Courtney
Trippin Amel 54 #101
Dr. J
|
By
Courtney Gorman
·
#38095
·
|
|
Re: 24v Dessalator motor stops under pressure
Thanks to all who made suggestions. It turns out that it was in fact the pulley wheel. Strange that it should break gradually.
Cheers,
Paul
Ya Fohi, Amel 54 #98
Thanks to all who made suggestions. It turns out that it was in fact the pulley wheel. Strange that it should break gradually.
Cheers,
Paul
Ya Fohi, Amel 54 #98
|
By
ya_fohi
·
#38094
·
|
|
Re: [Amel Yacht Owners] Maramu: Location for watermaker
Miles,
One thing to add re installing you RO system. My low pressure feed pump is a Johnson Pumps CM30P7. The pump is almost totally silent, but does need to be mounted below the waterline. It feeds
Miles,
One thing to add re installing you RO system. My low pressure feed pump is a Johnson Pumps CM30P7. The pump is almost totally silent, but does need to be mounted below the waterline. It feeds
|
By
David Wallace
·
#38093
·
|
|
Re: [Amel Yacht Owners] Re: 54 TV lift
Awesome! Thanks
By
Courtney Gorman
·
#38092
·
|
|
Re: [Amel Yacht Owners] Re: 54 TV lift
Hi,
there is a small metal box containing four fuses behind the bench. You'll have to remove the wooden cover. In my case it was just a fuse that didn't work anymore.
Best Regards,
Alex
AMEL54
Hi,
there is a small metal box containing four fuses behind the bench. You'll have to remove the wooden cover. In my case it was just a fuse that didn't work anymore.
Best Regards,
Alex
AMEL54
|
By
Alex Ramseyer <alexramseyer@...>
·
#38091
·
|
|
Re: [Amel Yacht Owners] Jib Track Plugs
Eric,
The plugs have the following dimensions:
Big OD 17 mm,
Small OD 13 mm,
Length 25 mm
Cut it to 6 or 6.5 mm length.
I thoroughly cleaned the cavities, applied grease on the screw head, and then
Eric,
The plugs have the following dimensions:
Big OD 17 mm,
Small OD 13 mm,
Length 25 mm
Cut it to 6 or 6.5 mm length.
I thoroughly cleaned the cavities, applied grease on the screw head, and then
|
By
VLADIMIR SONSEV
·
#38090
·
|
|
Re: [Amel Yacht Owners] Bow Thruster Abuse
Jeff, FYI, The 53 and 54 bow thrusters are entirely different . You are correct that the 54 incorporates a thermal limiter to keep it from going Chernobyl when overused. The 53 has no thermal or
Jeff, FYI, The 53 and 54 bow thrusters are entirely different . You are correct that the 54 incorporates a thermal limiter to keep it from going Chernobyl when overused. The 53 has no thermal or
|
By
amelforme
·
#38089
·
|
|
Re: [Amel Yacht Owners] Bow Thruster Wiring and French terms??
Is it hand-written, and thus might be "tom", for "tomber"? That's French for "drop/fall/go down". That's my only guess; some quick googling didn't turn up any other likely meanings.
Ryan
SM 233
Is it hand-written, and thus might be "tom", for "tomber"? That's French for "drop/fall/go down". That's my only guess; some quick googling didn't turn up any other likely meanings.
Ryan
SM 233
|
By
Ryan Meador
·
#38088
·
|
|
Re: [Amel Yacht Owners] Re: SM stern bumper paint
Thanks, I'll look for a paint that works on both materials.
I don't really like the idea of a skirt for aesthetic and practical reasons. I feel like it would have a hard time covering the whole thing
Thanks, I'll look for a paint that works on both materials.
I don't really like the idea of a skirt for aesthetic and practical reasons. I feel like it would have a hard time covering the whole thing
|
By
Ryan Meador
·
#38087
·
|
|
Re: SM stern bumper paint
Hi Ryan,
Years ago, when I owned a Santorin, I asked the sailmaker (for canvas work) to make a skirt of white vinyl around the bumper with an elastic tensioning cord. It worked quite well and although
Hi Ryan,
Years ago, when I owned a Santorin, I asked the sailmaker (for canvas work) to make a skirt of white vinyl around the bumper with an elastic tensioning cord. It worked quite well and although
|
By
Willem Kroes
·
#38086
·
|
|
Re: Alternator replacement
Thanks Paul & others. I’ll check when I am on the boat again.
Thanks Paul & others. I’ll check when I am on the boat again.
|
By
Rink De Haan
·
#38085
·
|
|
Bamar MEJ1 Furlers
I was wondering if anyone knows what the specs are for the 24v motor that drives the Bamar MEJ1 furlers. I want to buy a spare motor but the UK agent charges £766 inc VAT for it. This strikes me as
I was wondering if anyone knows what the specs are for the 24v motor that drives the Bamar MEJ1 furlers. I want to buy a spare motor but the UK agent charges £766 inc VAT for it. This strikes me as
|
By
kwzy6vgkpvtfohjddjsrotobzwf2pjeafjwalhur@...
·
#38084
·
|
|
Re: [Amel Yacht Owners] Bow Thruster Abuse
Hi Paul, if the super maramus thruster motors are made by sliepner, and they are a side power, as on the 54, there is a built in overheat switch. The switch itself will go (ask me how I know) and the
Hi Paul, if the super maramus thruster motors are made by sliepner, and they are a side power, as on the 54, there is a built in overheat switch. The switch itself will go (ask me how I know) and the
|
By
JEFFREY KRAUS
·
#38083
·
|
|
Re: [Amel Yacht Owners] Maramu: Location for watermaker
Many thanks for that idea David
I’ll have a look at that when I’m next onboard
I was actually thinking I’d mount the reverse osmosis unit on the fibreglass tray behind the toilet but you have
Many thanks for that idea David
I’ll have a look at that when I’m next onboard
I was actually thinking I’d mount the reverse osmosis unit on the fibreglass tray behind the toilet but you have
|
By
smiles bernard
·
#38082
·
|