Try DoeBoi in George Town, Great Exuma. Ian S/V Loca Lola II SM153

Bill, The hole where the wires come up is lined with a pipe that rises probably 3/4" above the deck. With the "house" over the top, it functions somewhat like a dorade box. I think it would take a

Thanks Per-Erik I look in to it 2018-03-29 16:39 GMT+02:00 lottaedwards@... [amelyachtowners] <amelyachtowners@...>: -- Niklas Glöggler

Like Mark said, check with the locals. They will know what works on that island, and will likely have a brother-in-law or cousin who can help. We found customs duty in the Bahamas to be pretty much a

Ryan, The short answer is "No" they are not all like that, it is an after market modification. If I understand what you describe correctly, and the angled housing for the Autopilot controller is not

Marc, Ask the yachtclub at Staniel Cay for a recommendation for a carrier to that island. Do notuse FedEx. FedEx does not deliver to all the islands and you will need to pickit up at a FedEx

Hej Niklas, Try svb.de they seems to have what you are looking for. https://www.svb.de/de/raymarine-getriebemotoren-fuer-autopiloten.html Hälsningar Per-Erik SM2K #373 Voyageur

Mark, Many thanks -I think I have a good lead at the moment but will keep this website as next reserve. Peter Peter Forbes 00447836 209730

Thank you Duane My first autopilot is on the rudder so this one I gonna put over the kitchen were many boats have it. Ray marine in Sweden don’t have it, do you know anybody in Europe we’re I can

This thread has me wondering if my boat is abnormal. My autopilot "house" is only held down by two thumb screws. Removing it is a common occurrence, as it's where the wires for the chartplotter come

Hello All, Can anyone tell me the best (most reliable and fastest) way to get parts in The Bahamas? I need a relay for my Onan generator and have found a supplier in Orlando willing to ship to me.

Arlo, This sounds like a typical reduction gearbox failure. With some deterioration in the worm shaft bearings over time the worm shaft goes a bit wobbly. Since it takes more force to furl than to

Niklas, The Raymarine Manual is here: https://raymarine.app.box.com/s/t6sr89ljtwacf2pxfs18/file/15856873943 There is a chart to help determine the size sprocket and chain to buy. Raymarine sells the

Hello Im going to install Raymarine rotary drive type 2 24v as a second autopilot and wonder if anybody knows the size on steering sprocket, drive sprocket and chain and were i can it? Have been in

Thanks Bill. I agree with your ergonomics note, but everything is a compromise! Duane

Steve, We're enjoying your FB posts...looks like everyones enjoying the trip! Duane

I moved mine--to make room for a 12" Navpod... Just siliconed down. Take out the screws, and good to go. There is room to move it, and I am reasonably happy with what I ended up with, but... the

We removed ours this fall and placed the Navpod over its existing cutout. Ours seemed to be held in place by something similar to 3m 4200. After removing r The screws, I took a single edged razor

I'm referring to the fiberglass "house" the Raymarine Autohelm controller resides in. I'd like to move it to make room for a Navpod with a 12" plotter just forward. I only need to move it aft an

Alex, Can you comment on the security situation in Venezuela? This is apparently your home? Is Cumana safer than other places in-country? Thanks, Duane Wanderer, SM#477