|
Re: [Amel Yacht Owners] SM Aft Cabin Hatch Holder [1 Attachment]
Thanks Bill for the photo and everyone for the suggestions.
Ian Townsend
Loca Lola II
SM153
George Town, Exuma
Thanks Bill for the photo and everyone for the suggestions.
Ian Townsend
Loca Lola II
SM153
George Town, Exuma
|
By
Ian Townsend
·
#37937
·
|
|
Re: Maramu: Location for watermaker
Hi Miles,
We mounted the reverse osmosis and the high pressure pump in the engine compartment. We located the feed pump in the port cockpit lazarette, down by the fresh water heater. We had to
Hi Miles,
We mounted the reverse osmosis and the high pressure pump in the engine compartment. We located the feed pump in the port cockpit lazarette, down by the fresh water heater. We had to
|
By
sbmesasailor
·
#37936
·
|
|
Re: [Amel Yacht Owners] SM Aft Cabin Hatch Holder
Our boat came with a "custom made" hatch prop. A 1"x2"x10" piece of unfinished teak. Inserted longwise it held the hatch wide open, edgewise just a bit open, and laid flat just a crack.
Even though
Our boat came with a "custom made" hatch prop. A 1"x2"x10" piece of unfinished teak. Inserted longwise it held the hatch wide open, edgewise just a bit open, and laid flat just a crack.
Even though
|
By
greatketch@...
·
#37935
·
|
|
Re: [Amel Yacht Owners] SM Aft Cabin Hatch Holder
I made 3 different-length props with pvc pipe and rubber table leg ends 5/8" dia. A second set for the dodger window allows me to crack it open for air when the traveler is moved to port.
I don't
I made 3 different-length props with pvc pipe and rubber table leg ends 5/8" dia. A second set for the dodger window allows me to crack it open for air when the traveler is moved to port.
I don't
|
By
karkauai
·
#37934
·
|
|
Re: [Amel Yacht Owners] SM Aft Cabin Hatch Holder
Ian,
Attached
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
Ian,
Attached
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#37933
·
|
|
Re: [Amel Yacht Owners] SM Aft Cabin Hatch Holder
or use chop sticks
By
Craig Briggs
·
#37932
·
|
|
Re: [Amel Yacht Owners] SM Aft Cabin Hatch Holder
No need for a special holder; just tighten the large Allen key situated on… opinion… the port side of the hinge. Works like a champ.
Jean-Pierre Germain
SY Eleuthera, SM 007
No need for a special holder; just tighten the large Allen key situated on… opinion… the port side of the hinge. Works like a champ.
Jean-Pierre Germain
SY Eleuthera, SM 007
|
By
Jean-Pierre's MacBook Air <jgermain@...>
·
#37931
·
|
|
SM Aft Cabin Hatch Holder
I have been told there is a special AMEL device/fixture that will prop the aft cabin hatch open. We can't find one on board so we would like to make one. Would anyone have a photo?
Ian
I have been told there is a special AMEL device/fixture that will prop the aft cabin hatch open. We can't find one on board so we would like to make one. Would anyone have a photo?
Ian
|
By
Ian Townsend
·
#37930
·
|
|
Re: [Amel Yacht Owners] Climma Compact 9 Capacitors
I could not find the small capacitors with leads attached, also the other two need to fit in the white box. They are round, most of the ones I have seen on the market are oval or are of a different
I could not find the small capacitors with leads attached, also the other two need to fit in the white box. They are round, most of the ones I have seen on the market are oval or are of a different
|
By
eric freedman
·
#37929
·
|
|
Re: Bow Thruster won't come up
A fellow Amel owner here in GA loaned me one of his spare sensor and bingo! The sensor was the problem and now I'm looking for replacements. Maud on Friday said she would let me know on Monday if
A fellow Amel owner here in GA loaned me one of his spare sensor and bingo! The sensor was the problem and now I'm looking for replacements. Maud on Friday said she would let me know on Monday if
|
By
Duane Siegfri
·
#37928
·
|
|
Re: [Amel Yacht Owners] Climma Compact 9 Capacitors
JAMES,
Capacitors are generic items and there is no reason to buy them from Climma. Check capacitors ratings. It should be written on the capacitors. Order online in any electronics supply
JAMES,
Capacitors are generic items and there is no reason to buy them from Climma. Check capacitors ratings. It should be written on the capacitors. Order online in any electronics supply
|
By
VLADIMIR SONSEV
·
#37927
·
|
|
Re: [Amel Yacht Owners] Climma Compact 9 Capacitors
I also just bought a Clima 12 there. Amazing price. And great service.
Porter
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
I also just bought a Clima 12 there. Amazing price. And great service.
Porter
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
|
By
Porter McRoberts
·
#37926
·
|
|
Re: [Amel Yacht Owners] Climma Compact 9 Capacitors
That is also where I bought mine.
Sincerely, Alexandre
--------------------------------------------
That is also where I bought mine.
Sincerely, Alexandre
--------------------------------------------
|
By
Alexandre Uster von Baar
·
#37925
·
|
|
Re: Maramu: Location for watermaker
I installed an Aquabase watermaker in the engine room. The pump went on a
small platform besides the battery compartment and the main unit is wall
mounted at the port side of the engine room as far
I installed an Aquabase watermaker in the engine room. The pump went on a
small platform besides the battery compartment and the main unit is wall
mounted at the port side of the engine room as far
|
By
Michael Konz <mkbiz@...>
·
#37924
·
|
|
[Amel Yacht Owners] Climma Compact 9 Capacitors
In the USA Coastal Climate Control
info@...
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
In the USA Coastal Climate Control
info@...
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#37923
·
|
|
Climma Compact 9 Capacitors
Hello everyone.
Can anyone recommend a source for replacement capacitors for the Climma Compact 9 AC units on the SM2000?
Thanks!
James
Soteria
SM2000 #347
Hello everyone.
Can anyone recommend a source for replacement capacitors for the Climma Compact 9 AC units on the SM2000?
Thanks!
James
Soteria
SM2000 #347
|
By
James Cromie
·
#37922
·
|
|
Re: Opacmare Passerelle sticking Jamming Nylon sliding support seized AMEL 54
Thanks all for your various advice. I have the unit reassembled. As my milling machine is in Dublin I used my timber thicknesser, which I have here in France. I removed about 1.3mm and this gave
Thanks all for your various advice. I have the unit reassembled. As my milling machine is in Dublin I used my timber thicknesser, which I have here in France. I removed about 1.3mm and this gave
|
By
amelfango
·
#37921
·
|
|
Maramu: Location for watermaker
Hi there
I have recently ordered a schenka watermaker.
It comes in two parts. The pump and the Reverse Osmosis unit.
The pump needs to be <2m from the skin fitting and the RO unit closeish and lowish
Hi there
I have recently ordered a schenka watermaker.
It comes in two parts. The pump and the Reverse Osmosis unit.
The pump needs to be <2m from the skin fitting and the RO unit closeish and lowish
|
By
smiles bernard
·
#37920
·
|
|
Re: [Amel Yacht Owners] Re: Opacmare Passerelle sticking Jamming Nylon sliding support seized AMEL 54
Sorry, but my last response was a mistake!
I should not have pressed the send button.
It seems I‘m getting too old for a fast reply.
All the best
Dieter
Sharki #135 Fal-lera
Von meinem iPhone
Sorry, but my last response was a mistake!
I should not have pressed the send button.
It seems I‘m getting too old for a fast reply.
All the best
Dieter
Sharki #135 Fal-lera
Von meinem iPhone
|
By
INUS - BUSCH
·
#37919
·
|
|
Re: [Amel Yacht Owners] Re: Opacmare Passerelle sticking Jamming Nylon sliding support seized AMEL 54
Sehr geehrter Herr Ertl,
Vielen Dank für die Antwort, damit kann ich was anfangen.
Und noch ein schönes Restwochenende.
Mit freundlichen Grüßen
Busch
Von meinem iPhone gesendet
Am 03.02.2018 um
Sehr geehrter Herr Ertl,
Vielen Dank für die Antwort, damit kann ich was anfangen.
Und noch ein schönes Restwochenende.
Mit freundlichen Grüßen
Busch
Von meinem iPhone gesendet
Am 03.02.2018 um
|
By
INUS - BUSCH
·
#37918
·
|