Hi Rudi, I commented on this in post #47906, which you might want to read. I suggested that 2-3 months with emulsified water-oil will not cause a problem and show pictures of my pristine drive shaft

Dear AMEL Groupies Is there a way to dain (pump/sucking) out bad Oil from the C-Drive while the boat is in water? Recently (after 3 years) I got water ingress into the C-Drive. I cannot go out on

Hello Ahmet, My email is: uster at rocketmail dot com For the price: US$ 350 or 300 Euro each. As I mentioned, the 4 injectors are in Sint Maarten where I hope to be back to Mid November.

Hi Alexander, May I ask your email to confirm parts and price, Please Ahmet

I have been using that butyl tape over the boat for a few years. However, for this application I think I would use a polysulfide like boat life or something similar. I would not feel comfortable using

Interesting that the Delos crew seem not to know that Amel has always used a barrier coat inside the gelcoat such that blisters are not an issue. After sand-blasting, which may have compromised the

Hello James, After several Amelians suggested the use of Butyl Tape, and after a bit of research on the subject.... I am going to use the Butyl Tape. Though I am a bit worried about completely

SV Delos has a good video for measuring the sq footage of the SM2k bottom and they used 9 gal of primer "I think"for their bottom. Around 705sqft. One layer grey, one white, and another grey. Then

Yes you can see the unused holes, but it's really of no consequence

Hi Gary, No kit number, we had to measure. And they are different, some wheels like ours with alloy spokes, some have round stainless spokes, no sure if the diameters are the same. Cheers Alan Elyse

By a small amount I think all the dimensions were different enough to need a good accurate measurement. Sorry I can't remember more details. Should have written things down... JOEL F. POTTER CRUISING

Gary- you have to remove the old cover and measure very carefully. I even sent pics of some of the measurements. Oddly, boat leather.com does not save measurements from previous orders. I was pretty

Thanks Alan- so can you see the disused holes in the wheel cover where it moves over the spoke or no ? Thomas Kleman SV L'ORIENT SM2K 422 Oahu

Thanks Joel. That would explain why two covers I got from Amel were too small. Maud didnt seem to know about the different diameters. Was the difference in wheel diameter or the size of the tube used.

I choose this solution without changing the signature of Henry Amel!! Arnold SM203 SV Zephyr Am 14.10.2020 um 21:41 schrieb amelforme <jfpottercys@...>: There were at least three distinctly different

There were at least three distinctly different steering wheels used on the Super Maramu during the production that yielded 479 examples over 16 years. I don’t remember the time period each wheel was

Ken, I have worked on boats that used the butyl tape and use it myself for applications. It is good stuff overall and I always carry some on the boat. Works best it seems on mating parts that

Hi Bill, I knew the copper vent pipe for the fuel tank in the closet area, however, I didn't know about the potential condensation problem within the closet. I will look a bit closer at the potential

Ken, Your plan should get you sealed back up. I didn't mention my recommendations for a sealant since I assume that you have a limited selection to pick from. The 5200 or 4200 will work for you.

Looks awesome! I wrote to them and asked about a kit for the SM .. Their reply was that "there are different sizes" so I needed to send measurements ... I didn't think this was the case. May I ask