Hi Eric, Thanks for your reply. I meant to say the outside bottom of the freezer. You can reach underneath it from the deck locker to stbd. The seals are in good-enough condition, they are on my

Hi Bill, It's on the outside bottom of the freezer that is just forward of the washing machine. I have tools in the below deck locker (between the washing machine and the drawers on the aft end of

Hi, Did does the freezer evaporator also Ice up? Did you do the dollar bill check on the seals? It seems unusual that there would be water and not ice on the inside bottom of your freezer Fair

Dear Rafael, I am so sorry that the insurance company raped you. I was hoping they would honor their obligation and pay .you what you fairly expected. We will miss you. You are always welcome

Bill,Thanks for the link to the informative update on your Firefly batteries. These batteries certainly sound promising. James Alton SV Sueño Maramu #220

Can you better describe which freezer and exactly where...inside or outside? Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School www.amelschool.com 720 Winnie St Galveston Island,

Dear Rafael, I think you need to tell the Group “your” story about the insurance. We have the same insurance Helvetia contracted through de Lassee and I really think every Amel owner should know

Way to go! I admire your tenacity. Even though I would have liked to see you in March. I wouldn't have like to see you in March. Get going already. Best of luck and safe sailing. Chuck

I'm having a lot of condensation on the bottom of the freezer. It's winter here in Georgia with humidity in the 60 to 85% range, and temperatures in the 50's and 60's. Water temp is right there as

After taking the control box apart and tracing all the wires down, I finally figured out that we had two problems. First the "UP" limit switch was dead. But then after replacing it the actuator that

Very sad story, I hope you find an other deram to live. Paul on SY Kerpa SM 259

AlexandreWish I was in the Caribbean, but stuck in Lagos Portugal.Not to bad but longing back to Kerpa and sailing again Paul

Good afternoon Eamonn, No worry about making a ladder in Greece! Mine is only interesting for people that are in the Caribbean! Definitely agree with you on the choice of aluminum! I know about the 2

Hello Paul, Here is the invoice for mine: http://www.nikimat.com/factures/2015_03_18_spurs_2.jpg Size “B” 1 1/2 “ (1.5 inch) If you were in the Caribbean, you could purchase my spare for 80%

Thank you Pat Got the info 35 mm size B Paul

I try it in spring with folie When it is reddy i will recomande Best Elja SM Balu 222

On SM Balu 222 the diameter is 35 mm

Dear friends AMEL owners Probably this will be the last email that I send and I will withdraw from the group. The reason is that Hurricane Irma destroyed my Amel SM2k and it will be impossible for

Paul, If someone does not provide the info you need, I can stop by your boat sometime next week and take a measurement for you. Pat SM Shenanigans

It is a B size just mention the name of my boat. They have it on file at the factory in florida. Fair Winds Eric Kimberlite Amel Super Maramu #376