Date   

Re: [Amel Yacht Owners] Hatch cover removal

Patrick McAneny
 

Jean-Pierre, I cannot move them at all , I assume the stainless and aluminum has corroded together. Can you tell me how many plastic washers are on each hatch? I think it may be only two , but not sure, as they sell them in sets of four.
Thanks,
Pat SM #123


-----Original Message-----
From: Jean-Pierre Germain jgermain@... [amelyachtowners]
To: amelyachtowners
Sent: Tue, Sep 5, 2017 1:51 pm
Subject: Re: [Amel Yacht Owners] Hatch cover removal

 
Hello Pat,

I don't know if my Goiot hatches are the same as yours but I can tighten mine with a large Alan key on the port side of the hatch. 

GL


On 5 Sep 2017, at 17:53, sailw32@... [amelyachtowners] <amelyachtowners@...> wrote:

 
My hatches don't stay open and I believe I need to replace the friction washer. I applied Pb Blaster for a couple of days , however they will not budge. Its a 1/2' SSteel rod ,threaded into the aluminum frame. Has anyone had any luck ever removing these rods or suggest how to. The fiberglass and lens is very close to use a torch. Also is there just two black plastic washers or more per hatch, I don't know as I have some missing.
Thanks,
Pat SM123


Re: [Amel Yacht Owners] Amfa domestic watrer pump.wired backwards from the factory.

eric freedman
 

Bill,

How about spare Vetus Mufflers?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Tuesday, September 05, 2017 5:18 AM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Amfa domestic watrer pump.wired backwards from the factory.

 

 

Eric,

 

With a spare bow thruster motor, you win.

 

Best

 

CW Bill Rouse

Admiral, Texas Navy

Commander Emeritus

Amel School www.amelschool.com

720 Winnie St

Galveston Island, TX 77550

+1(832) 380-4970

 

On Mon, Sep 4, 2017 at 9:55 PM, 'sailormon' kimberlite@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Bill,

I do not know who has/had  more spares You on BeBe, Alexandre on Nikimat, or Kimberlite.

Fair Winds

Eric

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, September 04, 2017 10:28 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Amfa domestic watrer pump.wired backwards from the factory.

 

 

Eric,

 

You are lucky to have a new AFMA pump. We can no longer buy them.

 

Best

 

CW Bill Rouse

Admiral, Texas Navy

Commander Emeritus

Amel School www.amelschool.com

720 Winnie St

Galveston Island, TX 77550

 

On Mon, Sep 4, 2017 at 9:23 PM, 'sailormon' kimberlite@... [amelyachtowners] <amelyachtowners@...> wrote:

 

My Amfa domestic water pump was leaking.

I removed the pump and found that the circlip that holds the pumps shaft seal was broken and worked its way into the side of the seal. I removed the seal and found it also had a small chip in it.

I ordered the metric seal from a local supplier and also the circlip from McMaster.

Being that I had a complete spare pump I installed it.

The pump would not pump water. I added water in the output side of the pump and it flooded the bronze impeller.

I was quire frustrated.

I assumed there was something wrong with the new pumps impeller. I took it apart, everything was 100%.

I was working on the saloon table and had the old pump next to the new one. Luckily I noticed that the Square D switch was wired backwards from the new switch. Thus the pump was running backwards. I switched the wires and Voila- Water.

Possibly this might help someone installing a new amfa pump.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

 


Re: [Amel Yacht Owners] Re: Head stay furler motor [1 Attachment]

Bob Sarff <bob.sarff@...>
 

Thanks Alan.

On Sep 5, 2017, at 8:53 PM, divanz620@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Bob,

Here are the contact details for Baobab...enjoy Musket Cove !
Cheers
Alan
Elyse SM437


Re: [Amel Yacht Owners] Hatch cover removal

Jean-Pierre Germain <jgermain@...>
 

Hello Pat,

I don't know if my Goiot hatches are the same as yours but I can tighten mine with a large Alan key on the port side of the hatch. 

GL


On 5 Sep 2017, at 17:53, sailw32@... [amelyachtowners] <amelyachtowners@...> wrote:

 

My hatches don't stay open and I believe I need to replace the friction washer. I applied Pb Blaster for a couple of days , however they will not budge. Its a 1/2' SSteel rod ,threaded into the aluminum frame. Has anyone had any luck ever removing these rods or suggest how to. The fiberglass and lens is very close to use a torch. Also is there just two black plastic washers or more per hatch, I don't know as I have some missing.

Thanks,

Pat SM123


Re: [Amel Yacht Owners] Bow thruster Amel 55 - 009-2012

Beaute Olivier
 

Hello Gavin,

there is a soft coupler between the motor and the gear-box input shaft. It is probably broken.
As your bow-thruster has been recently serviced, you should indeed ask AMEL Hyeres about it (or go back there).

Olivier


On Tuesday, September 5, 2017 4:31 PM, "'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]" wrote:


 
Gavin,

There are a number of possible issues. 

If I were you and since you are close to Hyeres, and since you are new to the 55, turn back and go to Amel in Hyeres.  


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

   

On Sep 5, 2017 06:36, "gavingilmorelodge@... [amelyachtowners]" <amelyachtowners@...> wrote:
 
The bow thruster is not driving.
 

The thruster goes up and down as normal but makes a grinding noise when the toggle drive switch is operated. The propellers do not turn.

I dived on the thruster and the propellors are free there is no debris but the propellors do not turn.

The thruster was serviced by Amel in Hyeres 3/7/17 and since then it has only gone to Golfe Juan. ( 50 miles )

I cant find technical information or a reference in the handbook.

I'd be pleased if anyone has suggestions or information to share.

Many thanks,

Gavin




Re: [Amel Yacht Owners] Anti torque bow thruster modification

Beaute Olivier
 

Hello Alan (Alan?),

if you post a picture of your bow-thruster from the front cabin, I will tell you if you have the anti-torque system or not.

Have a good day.

Olivier


On Tuesday, September 5, 2017 6:04 PM, "alanwood123@... [amelyachtowners]" wrote:


 
I'm just migrating this discussion from the Amel FB page as you guys seem to be more technically inclined. With reference to a question I had about too much 'play' in my newly acquired SM 97, I came across some documentation about an anti-torque mechanism that apparently was standard fit after 2003 but can be retro fitted to pre 2003 bow thrusters. Anyone fitted one and if so, does it work?



Hatch cover removal

Patrick McAneny
 

My hatches don't stay open and I believe I need to replace the friction washer. I applied Pb Blaster for a couple of days , however they will not budge. Its a 1/2' SSteel rod ,threaded into the aluminum frame. Has anyone had any luck ever removing these rods or suggest how to. The fiberglass and lens is very close to use a torch. Also is there just two black plastic washers or more per hatch, I don't know as I have some missing.

Thanks,

Pat SM123


Anti torque bow thruster modification

alanwood123@...
 

I'm just migrating this discussion from the Amel FB page as you guys seem to be more technically inclined. With reference to a question I had about too much 'play' in my newly acquired SM 97, I came across some documentation about an anti-torque mechanism that apparently was standard fit after 2003 but can be retro fitted to pre 2003 bow thrusters. Anyone fitted one and if so, does it work?


Re: Instrument Interconnections

Wolfgang Weber
 

You only have to press DISP button, turn the rotate key until you see the satellite weather screen, than press the rotate key and you can choose WX or NAV text. 
Did you add a (wireless ?) mouse to your Furuno MFD - works just easier.
Do you have SSB BLU ? Perhaps we can try it
Wolfgang Weber SY Elise Amel 54 #162 near Kalamata GR


Re: [Amel Yacht Owners] Instrument Interconnections

Dean Gillies
 

Good suggestion, I might try that Bill, if I can find one that speaks both BandG and Furuno. The majority of the electronics is Furuno.  Satellite phones and Sat TV, well that's a whole new world of wonder for me too :-)


Re: Instrument Interconnections

Dean Gillies
 

Thanks Bill and Wolfgang,
I didn't realise Navtex was a VHF service. 
I do have the Fax30, but have not had any time yet to explore it.
Cheers
Dean
SY Stella 
Amel 54 #154


Re: [Amel Yacht Owners] Re: Instrument Interconnections

Wolfgang Weber
 

4th is for NAV text and weather fax if you have fax-30 connected to youth furuno. 

Wolfgang Weber SY Elise Amel 54 #162


Re: [Amel Yacht Owners] Best trade wind rig for an Amel 55

jhe1313@...
 

Gavin, there is an article on the Amel forum (set up by Amel) on how to rig the runners. That's what I was referencing in my post. I don't have anything about the sails generally. Cheers Joerg


Re: [Amel Yacht Owners] Re: Instrument Interconnections

Bill & Judy Rouse <yahoogroups@...>
 

Trace or ask previous owners. 


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

   

On Sep 5, 2017 07:42, "Bill & Judy Rouse" <yahoogroups@...> wrote:
I can tell you that three of the antennas are for sure:
1.) VHF
2.) AIS
3.) AM/FM Radio
The 4th may be an omnidirectional WiFi antenna

To know for sure, you either need to trace, or


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

   

On Sep 5, 2017 07:07, "trifin@... [amelyachtowners]" <amelyachtowners@yahoogroups.com> wrote:
 

Thanks Ofer, good to know it's not just me without heading data.

I'll put that problem further down my list for the moment!

Some progress ...
Today I moved the VHF Antenna cable which was connected to the VHF radio, to the FA50.
Now, I am transmitting successfully, as well as receiving.

So, now I need to find out where is the bad connection to the antenna.

I note there are 4 VHF antennas, 2 on each mast.
Why so many?

Cheers
Dean
SY Stella
Amel 54 #154




Re: [Amel Yacht Owners] Re: Instrument Interconnections

Bill & Judy Rouse <yahoogroups@...>
 

I can tell you that three of the antennas are for sure:
1.) VHF
2.) AIS
3.) AM/FM Radio
The 4th may be an omnidirectional WiFi antenna

To know for sure, you either need to trace, or


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

   

On Sep 5, 2017 07:07, "trifin@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Thanks Ofer, good to know it's not just me without heading data.

I'll put that problem further down my list for the moment!

Some progress ...
Today I moved the VHF Antenna cable which was connected to the VHF radio, to the FA50.
Now, I am transmitting successfully, as well as receiving.

So, now I need to find out where is the bad connection to the antenna.

I note there are 4 VHF antennas, 2 on each mast.
Why so many?

Cheers
Dean
SY Stella
Amel 54 #154




Re: Instrument Interconnections

Dean Gillies
 

Thanks Ofer, good to know it's not just me without heading data.
I'll put that problem further down my list for the moment!

Some progress ...
Today I moved the VHF Antenna cable which was connected to the VHF radio, to the FA50.
Now, I am transmitting successfully, as well as receiving.

So, now I need to find out where is the bad connection to the antenna.

I note there are 4 VHF antennas, 2 on each mast.
Why so many?

Cheers
Dean
SY Stella
Amel 54 #154




Re: [Amel Yacht Owners] Bow thruster Amel 55 - 009-2012

Bill & Judy Rouse <yahoogroups@...>
 

Gavin,

There are a number of possible issues. 

If I were you and since you are close to Hyeres, and since you are new to the 55, turn back and go to Amel in Hyeres.  


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

   

On Sep 5, 2017 06:36, "gavingilmorelodge@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

The bow thruster is not driving.

 


The thruster goes up and down as normal but makes a grinding noise when the toggle drive switch is operated. The propellers do not turn.


I dived on the thruster and the propellors are free there is no debris but the propellors do not turn.


The thruster was serviced by Amel in Hyeres 3/7/17 and since then it has only gone to Golfe Juan. ( 50 miles )


I cant find technical information or a reference in the handbook.


I'd be pleased if anyone has suggestions or information to share.


Many thanks,


Gavin



Bow thruster Amel 55 - 009-2012

gavingilmorelodge@...
 

The bow thruster is not driving.

 


The thruster goes up and down as normal but makes a grinding noise when the toggle drive switch is operated. The propellers do not turn.


I dived on the thruster and the propellors are free there is no debris but the propellors do not turn.


The thruster was serviced by Amel in Hyeres 3/7/17 and since then it has only gone to Golfe Juan. ( 50 miles )


I cant find technical information or a reference in the handbook.


I'd be pleased if anyone has suggestions or information to share.


Many thanks,


Gavin


Re: [Amel Yacht Owners] Best trade wind rig for an Amel 55

Gavin Shaw <gavingilmorelodge@...>
 

Thanks Joerg, very helpful.

We bought hull 9 (2012) a few months ago. Although the first owner passed on an Amel 55 owner's manual this provides no advice on rig and sail configurations. When we asked Amel if there was a user's manual with recommended sail arrangements they said no. Yet you refer to "instructions" for how to use the staysail when beating in strong winds. If you have Amel approved instructions for using the sails generally would you be able to send these as an email attachment?

Many thanks,

Gavin


Re: [Amel Yacht Owners] Amfa domestic watrer pump.wired backwards from the factory.

Bill & Judy Rouse <yahoogroups@...>
 

Eric,

With a spare bow thruster motor, you win.

Best

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Mon, Sep 4, 2017 at 9:55 PM, 'sailormon' kimberlite@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Bill,

I do not know who has/had  more spares You on BeBe, Alexandre on Nikimat, or Kimberlite.

Fair Winds

Eric

 

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Monday, September 04, 2017 10:28 PM
To: amelyachtowners@yahoogroups.com
Subject: Re: [Amel Yacht Owners] Amfa domestic watrer pump.wired backwards from the factory.

 

 

Eric,

 

You are lucky to have a new AFMA pump. We can no longer buy them.

 

Best

 

CW Bill Rouse

Admiral, Texas Navy

Commander Emeritus

Amel School www.amelschool.com

720 Winnie St

Galveston Island, TX 77550

 

On Mon, Sep 4, 2017 at 9:23 PM, 'sailormon' kimberlite@... [amelyachtowners] <amelyachtowners@yahoogroups.com> wrote:

 

My Amfa domestic water pump was leaking.

I removed the pump and found that the circlip that holds the pumps shaft seal was broken and worked its way into the side of the seal. I removed the seal and found it also had a small chip in it.

I ordered the metric seal from a local supplier and also the circlip from McMaster.

Being that I had a complete spare pump I installed it.

The pump would not pump water. I added water in the output side of the pump and it flooded the bronze impeller.

I was quire frustrated.

I assumed there was something wrong with the new pumps impeller. I took it apart, everything was 100%.

I was working on the saloon table and had the old pump next to the new one. Luckily I noticed that the Square D switch was wired backwards from the new switch. Thus the pump was running backwards. I switched the wires and Voila- Water.

Possibly this might help someone installing a new amfa pump.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376