Date   

Re: Climma Air Conditioning from shore power

Andrew & Kate Lamb
 

Thanks Bill

I was not sure as I thought that these AC motors were quite sensitive to frequency - good to know.

Andrew
SM 472
Canet-en-Roussillon


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of CW Bill Rouse <brouse@...>
Sent: Tuesday, February 16, 2021 4:11:24 PM
To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] Climma Air Conditioning from shore power
 
Alan,

Yes, the Climma system will work at 60htz. I connected to 220-250 60htz many times over the years and so have many others.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Feb 16, 2021 at 7:39 AM Andrew & Kate Lamb <andrew.lamb@...> wrote:
Hi Peter

Unless I am misunderstanding, if Mexico is a 60hz system will that ever work with the climate if it is designed for 50hz? 

Andrew
SM 472

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Peter de Groot <pandmdegroot@...>
Sent: Tuesday, February 16, 2021 2:26 pm
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Climma Air Conditioning from shore power
 
Thanks Andrew and Eric,
I am in the process of getting a new pump/motor.  With the suggestions and help from the group, I took the Calpeda pump out and isolated the winding leads and got the following readings :
> Main windings
> Green1 to Green2: 12.7Ohm
> Green1 to ground: 290 Ohm
> Green 2 to ground: 277 Ohm
> Starter windings
> Red to Black:  17.1 Ohm
> Red to ground: 260 Ohm
> Black to ground:  277 Ohm

The relatively low resistance to ground would explain why the Amel breaker on the 220 panel was tripping upon plugging in West coast 220 power with two hot legs, as one leg would be going through 280 ohms resistance to ground.  When powered from the generator that would be a neutral leg and would not draw enough current to trip the breaker.

Now the challenge is getting the replacement pump/motor here at a reasonable cost.  I’m trying a Mexican Calpeda distributor in an attempt to avoid exorbitant Mexican import duties.

Yes Andrew the generator is 220VAC, 50 Hz.

Peter de Groot
SM La Querida #207
Barra de Navidad, Mexico






Re: Multiplexer Wi-Fi

 

Jose,


Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Feb 16, 2021 at 9:20 AM JOSE PRIETO <prietomd11@...> wrote:
Perfect Bill!

You saved my life again! :)

thanks

--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain


Re: Multiplexer Wi-Fi

JOSE PRIETO
 

Perfect Bill!

You saved my life again! :)

thanks

--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain


Re: great source for watermaker membranes.

Slavko Despotovic
 

👍
--
Slavko
SM 2000
#279 Bonne Anse in Portoroz


Re: great source for watermaker membranes.

 

some suppliers enjoy more profit, others less😀
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Feb 16, 2021 at 9:07 AM Slavko Despotovic <slavko@...> wrote:
I know that. Question I asked is due to significant price difference for the same product from different suppliers.
--
Slavko
SM 2000
#279 Bonne Anse in Portoroz


Re: Climma Air Conditioning from shore power

 

Alan,

Yes, the Climma system will work at 60htz. I connected to 220-250 60htz many times over the years and so have many others.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Feb 16, 2021 at 7:39 AM Andrew & Kate Lamb <andrew.lamb@...> wrote:
Hi Peter

Unless I am misunderstanding, if Mexico is a 60hz system will that ever work with the climate if it is designed for 50hz? 

Andrew
SM 472

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Peter de Groot <pandmdegroot@...>
Sent: Tuesday, February 16, 2021 2:26 pm
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Climma Air Conditioning from shore power
 
Thanks Andrew and Eric,
I am in the process of getting a new pump/motor.  With the suggestions and help from the group, I took the Calpeda pump out and isolated the winding leads and got the following readings :
> Main windings
> Green1 to Green2: 12.7Ohm
> Green1 to ground: 290 Ohm
> Green 2 to ground: 277 Ohm
> Starter windings
> Red to Black:  17.1 Ohm
> Red to ground: 260 Ohm
> Black to ground:  277 Ohm

The relatively low resistance to ground would explain why the Amel breaker on the 220 panel was tripping upon plugging in West coast 220 power with two hot legs, as one leg would be going through 280 ohms resistance to ground.  When powered from the generator that would be a neutral leg and would not draw enough current to trip the breaker.

Now the challenge is getting the replacement pump/motor here at a reasonable cost.  I’m trying a Mexican Calpeda distributor in an attempt to avoid exorbitant Mexican import duties.

Yes Andrew the generator is 220VAC, 50 Hz.

Peter de Groot
SM La Querida #207
Barra de Navidad, Mexico






Re: Multiplexer Wi-Fi

 

This should help you. 
image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Feb 16, 2021 at 6:40 AM JOSE PRIETO <prietomd11@...> wrote:
Hi Dominique!

I’ll try and let you know.
thanks

--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain


Re: great source for watermaker membranes.

Slavko Despotovic
 

I know that. Question I asked is due to significant price difference for the same product from different suppliers.
--
Slavko
SM 2000
#279 Bonne Anse in Portoroz


Re: great source for watermaker membranes.

 

Remember there is one manufacturer of membranes in the world. Regardless of where you buy them, they are the same and made by Filmtech
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Mon, Feb 15, 2021 at 6:17 PM Slavko Despotovic <slavko@...> wrote:
Hi Eric,

I am just in process of ordering membranes for my D60 dessalator. The price of SW30-2540 on the site you have in your mail is very affordable. What is your experience with them. I would need membranes in Slovenia, EU.

Regards,
--
Slavko
SM 2000
#279 Bonne Anse in Portoroz


Re: Parasailor on A54

Joerg Esdorn
 

Stefan, I have 169 m2 on the A55.  I hope that helps.  


joerg


Re: Climma Air Conditioning from shore power

Andrew & Kate Lamb
 

Hi Peter

Unless I am misunderstanding, if Mexico is a 60hz system will that ever work with the climate if it is designed for 50hz? 

Andrew
SM 472


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Peter de Groot <pandmdegroot@...>
Sent: Tuesday, February 16, 2021 2:26 pm
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Climma Air Conditioning from shore power
 
Thanks Andrew and Eric,
I am in the process of getting a new pump/motor.  With the suggestions and help from the group, I took the Calpeda pump out and isolated the winding leads and got the following readings :
> Main windings
> Green1 to Green2: 12.7Ohm
> Green1 to ground: 290 Ohm
> Green 2 to ground: 277 Ohm
> Starter windings
> Red to Black:  17.1 Ohm
> Red to ground: 260 Ohm
> Black to ground:  277 Ohm

The relatively low resistance to ground would explain why the Amel breaker on the 220 panel was tripping upon plugging in West coast 220 power with two hot legs, as one leg would be going through 280 ohms resistance to ground.  When powered from the generator that would be a neutral leg and would not draw enough current to trip the breaker.

Now the challenge is getting the replacement pump/motor here at a reasonable cost.  I’m trying a Mexican Calpeda distributor in an attempt to avoid exorbitant Mexican import duties.

Yes Andrew the generator is 220VAC, 50 Hz.

Peter de Groot
SM La Querida #207
Barra de Navidad, Mexico






Re: Climma Air Conditioning from shore power

Peter de Groot
 

Thanks Andrew and Eric,
I am in the process of getting a new pump/motor. With the suggestions and help from the group, I took the Calpeda pump out and isolated the winding leads and got the following readings :
Main windings
Green1 to Green2: 12.7Ohm
Green1 to ground: 290 Ohm
Green 2 to ground: 277 Ohm
Starter windings
Red to Black: 17.1 Ohm
Red to ground: 260 Ohm
Black to ground: 277 Ohm
The relatively low resistance to ground would explain why the Amel breaker on the 220 panel was tripping upon plugging in West coast 220 power with two hot legs, as one leg would be going through 280 ohms resistance to ground. When powered from the generator that would be a neutral leg and would not draw enough current to trip the breaker.

Now the challenge is getting the replacement pump/motor here at a reasonable cost. I’m trying a Mexican Calpeda distributor in an attempt to avoid exorbitant Mexican import duties.

Yes Andrew the generator is 220VAC, 50 Hz.

Peter de Groot
SM La Querida #207
Barra de Navidad, Mexico


Re: Multiplexer Wi-Fi

JOSE PRIETO
 

Hi Dominique!

I’ll try and let you know.
thanks

--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain


Re: Multiplexer Wi-Fi

Dominique Sery
 

Hello,
il connected my hydra 2000 (without jonction box) to a Miniplex wifi and it works fine
if i remember, the nmea out are terminals 11, 12, 13

11 nmea out -
12 nmea out +
13 ground
with the covid i can’t go to my boat to have a look...

Dominique


Re: Multiplexer Wi-Fi

JOSE PRIETO
 

Hi Slavko,

Thanks for your advice and the docs.
I new the docs you sent me, but my problem is that I don’t have the B&G connection box installed, so, there’s no cables ready for NMEA 0183 out connection available on the system. I have the B&G processor device (on back of the rack) from and to the instruments, transducers and the hydra 2000 are connected. I want to know from where I can “steal” the NMEA 0183 signal. See the picture attached.
--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain


Re: Curtain Sizes for SM2000

Ross Hickey & Donna Hammond
 

Hi Victor we would be very interested in your curtains as we really like them and wish to keep them on our Amel.

We are currently located in Turkey

Kind regards
Ross and Donna
southernadvenrurer@... 
SV Intrepid Kiwi 
SM2K #356

On Tuesday, February 16, 2021, 11:43 am, VICTOR MOLERO <victor.moleroxx@...> wrote:

We have just replaced the curtains (for decoration purposes) and the old ones are in very good conditions. I am happy so give them to anyone who may want them. Contact me in private if anyone wants them.
Victor 
SM314 Alendoy


Re: Multiplexer Wi-Fi

Slavko Despotovic
 

Hi Jose,

I have done that. Please see attached file. if you need more help please contact me. 



regards,

Slavko
--
Slavko
SM 2000
#279 Bonne Anse in Portoroz


Multiplexer Wi-Fi

JOSE PRIETO
 

I'm trying to make a Wi-Fi network from the original electronic equipment on my SM year 2001. Can someone help me know where to get the NMEA 0183 signal from Hydra 2000?  on the back cover of the hydra 2000 there is no other outlet, except the connector that goes to the processor.  I don't have the connection box installed.
--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain


Re: AMEL Group Insurance -- Update?

VICTOR MOLERO
 

I am now in the Mediterranean, but thinking about the Caribean for the coming year, so please, put me in the list as well.
Victor 
SM314 Alendoy


Re: Curtain Sizes for SM2000

VICTOR MOLERO
 

We have just replaced the curtains (for decoration purposes) and the old ones are in very good conditions. I am happy so give them to anyone who may want them. Contact me in private if anyone wants them.
Victor 
SM314 Alendoy

2061 - 2080 of 58614