Date   

Re: [Amel Yacht Owners] Rudder Anodes USA

Ben and Gayle Super Maramu #347
 

I’ve bought R-5’s at West Marine.  But you do need drill them out a bit for larger SM anode bolt. 

Ben Driver
La Bella Vita
SM #347
6S


On Oct 28, 2017, at 10:11 AM, qmvwv3fna4dth3r32bdwtz3bpy7meopg2s2xlnuq@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Hello!


Does anyone know were to buy rudder Anodes for a SM 2000 in the US?


Oliver

SV JoEmi

SM 2000


Rudder Anodes USA

qmvwv3fna4dth3r32bdwtz3bpy7meopg2s2xlnuq@...
 

Hello!


Does anyone know were to buy rudder Anodes for a SM 2000 in the US?


Oliver

SV JoEmi

SM 2000


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

Alex Ramseyer <alexramseyer@...>
 



Looking at the back of my generator, I saw a whole new world – and it was not really exciting. The contacts to the starter solenoid (I guess it is..) as well as the solenoid down at the bottom of the back of the gen are corroded. I sprayed with contact spray and a day later I hear it clicking and it started again. But only for one time and then it went back to trying to start (initiating starting mechanism for ca. half a second. So I think I have to get rid of that corrosion to get the problem solved. Any best practices from your side are appreciated.

Another disturbing factor was to see one grounding strap tied to the bonding system, but a second one hanging around with no attachment at all (see picture). Can someone tell me where that needs to be attached to?

Thanks, Alex


On Saturday, October 28, 2017, 9:37:21 AM GMT-4, mfmcgovern@... [amelyachtowners] wrote:


 

Hanspeter,

I'm not sure if your commentary was directed at me or not but it seems that it was so I will respond. The following question was asked by a forum member:

"Is it likely (or even possible?) that the battery could start the main engine but NOT the generator?"

Given that I have experienced THAT EXACT SCENARIO in my SM I answered their question. Now every Amel owner who reads this thread will know that this scenario is possible and it might help them resolve their problem. And that, in my mind at least, is what this forum is all about. Amel owners helping other Amel owners solve problems so they can spend more time enjoying their boats, travel, and travelling companions. I will continue to answer questions and contribute in this way where I can and when i can to try to give back to this forum that has given me so much.

Regards,
Mark
SM 440 Cara
Deale, MD USA


Re: ONAN Generator not starting

mfmcgovern@...
 

Hanspeter,

I'm not sure if your commentary was directed at me or not but it seems that it was so I will respond. The following question was asked by a forum member:

"Is it likely (or even possible?) that the battery could start the main engine but NOT the generator?"

Given that I have experienced THAT EXACT SCENARIO in my SM I answered their question. Now every Amel owner who reads this thread will know that this scenario is possible and it might help them resolve their problem. And that, in my mind at least, is what this forum is all about. Amel owners helping other Amel owners solve problems so they can spend more time enjoying their boats, travel, and travelling companions. I will continue to answer questions and contribute in this way where I can and when i can to try to give back to this forum that has given me so much.

Regards,
Mark
SM 440 Cara
Deale, MD USA


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

Craig Briggs
 

Greetings Alex,
It sounds like you have identified the problem since you are now getting parts. What was the problem and what parts do you need? 
Cheers, Craig


---In amelyachtowners@..., <alexramseyer@...> wrote :

Dear Amelians, thank you all for your great input. I'm working on it and will have to find parts needed here in Grenada. Will let you know how I progress..
Cheers, Alex 


Re: [Amel Yacht Owners] only available until mid of Dec! >>> AMEL Rubber Rails BRAND NEW 2 x 16.0m [2 Attachments]

Ron Hynes <riffhynes@...>
 

I expressed interest when you first posted.  I won't be in the Caribbean until Spring.  Where are you headed?  I'm going to be in Brazil for a couple of months then work back to Florida.

Meltem 1976, SWAN Song #29

On Sat, Oct 28, 2017 at 11:15 AM, Olaf Bauer olaf_renos@... [amelyachtowners] <amelyachtowners@...> wrote:
 
[Attachment(s) from Olaf Bauer included below]

>>> The rubber rails are only available until middle of December! <<<
 

Hello AMELians,

I posted this offer some month before. Now an update that this rails are only available until middle of December 2017. 

I sell two original and brand new AMEL Rubber rails for Super Maramu 2000 and  Santorin.
2 PC x 16meters.
Brand NEW.
AMEL Caribe sell them for 26.65 € per meter + Tax. That is € 852.8 + TAX.
 
I will sell them for € 550 all-in.

I can deliver them between Grenada and St. Martin for free.  
 
>>> The rubber rails are only available until middle of December! <<<
 
 
Fair winds

Olaf
MIA-AMARA, Santorin #135
LeMarin, Martinique




--
Regards,
Ron Hynes
954.319.0944


Re: [Amel Yacht Owners] only available until mid of Dec! >>> AMEL Rubber Rails BRAND NEW 2 x 16.0m [2 Attachments]

Mark Erdos
 

Olaf,

 

I would like to buy these. I will send a private email.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Grenada

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Saturday, October 28, 2017 6:15 AM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] only available until mid of Dec! >>> AMEL Rubber Rails BRAND NEW 2 x 16.0m [2 Attachments]

 

 

[Attachment(s) from Olaf Bauer included below]

>>> The rubber rails are only available until middle of December! <<<

 



Hello AMELians,


I posted this offer some month before. Now an update that this rails are only available until middle of December 2017. 



I sell two original and brand new AMEL Rubber rails for Super Maramu 2000 and  Santorin.

2 PC x 16meters.

Brand NEW.

AMEL Caribe sell them for 26.65 € per meter + Tax. That is € 852.8 + TAX.

 

I will sell them for € 550 all-in.


I can deliver them between Grenada and St. Martin for free.  

 

>>> The rubber rails are only available until middle of December! <<<

 

 

Fair winds


Olaf
MIA-AMARA, Santorin #135

LeMarin, Martinique


only available until mid of Dec! >>> AMEL Rubber Rails BRAND NEW 2 x 16.0m

Olaf Bauer <olaf_renos@...>
 

>>> The rubber rails are only available until middle of December! <<<
 

Hello AMELians,

I posted this offer some month before. Now an update that this rails are only available until middle of December 2017. 

I sell two original and brand new AMEL Rubber rails for Super Maramu 2000 and  Santorin.
2 PC x 16meters.
Brand NEW.
AMEL Caribe sell them for 26.65 € per meter + Tax. That is € 852.8 + TAX.
 
I will sell them for € 550 all-in.

I can deliver them between Grenada and St. Martin for free.  
 
>>> The rubber rails are only available until middle of December! <<<
 
 
Fair winds

Olaf
MIA-AMARA, Santorin #135
LeMarin, Martinique


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

hanspeter baettig
 

Mark
you  get a new design of your SM
great. Ask Amel how they did the design. The main engine has nothing to do with the the geni
the geni needs not more amp,
the problem is ?
but dont comment problem solving ideas, saying it is not my part number and saying i dont understand anything. I want to keep this forum with tecnical input; serious !!
Mark I dont critices you but I think this forum  questions goes a littel bit
direction not to be "The Amel Blue Water" Familie!
Tamango 2
Hanspeter
SM 16
Gibraltar

Von meinem iPhone gesendet

Am 27.10.2017 um 14:17 schrieb Alexandre Uster von Baar uster@... [amelyachtowners] <amelyachtowners@...>:

 

Interesting as, just looking at the size of the starters, I would “guess” the engine would require more amp than the generator to start…
If the engine starts, could it be poor/degraded electrical connection to the generator?
Would be interesting to measure voltage, etc.

Sincerely, Alexandre

--------------------------------------------
On Fri, 10/27/17, mfmcgovern@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: [Amel Yacht Owners] Re: ONAN Generator not starting
To: amelyachtowners@...
Date: Friday, October 27, 2017, 6:57 AM


 









Yes it's possible for the starting battery to
start the engine but not the generator. When I bought our
SM the starting battery was almost dead. The engine would
start fine but the generator would not start at all. We had
to start the engine first in order the start the generator
until we changed out the battery.



Mark

SM #440 Cara

Deale, MD USA



Re: [Amel Yacht Owners] Re: ONAN Generator not starting

hanspeter baettig
 

Hoi Alex 
Yes often the input from this forum is ...
Someting else about Riza, Emek!
I'm surprised that we got no feedback about all the bad issues of Emek, Riza from Bill Rousse!
2014 he recemomanded to go to him. He his a great guy!!
sorry to say that, but JP, Robin, me, and orhers critized this person.
Bill told me to not critizies this guy ....
waiting for feedback on this forum
Hanspeter
Tamango 2; SM16
Gibraltar

Von meinem iPhone gesendet

Am 27.10.2017 um 19:41 schrieb Alex Ramseyer alexramseyer@... [amelyachtowners] <amelyachtowners@...>:

 

Dear Amelians, thank you all for your great input. I'm working on it and will have to find parts needed here in Grenada. Will let you know how I progress..
Cheers, Alex

On ‎Friday‎, ‎October‎ ‎27‎, ‎2017‎ ‎09‎:‎11‎:‎11‎ ‎AM‎ ‎BOT, mfmcgovern@... [amelyachtowners] <amelyachtowners@...> wrote:


 

Alex,


I recommend that you buy one of these or similar:  https://www.amazon.com/BA7-100-1200-Electronic-Battery-System/dp/B0015PI7A4

My dock neighbor is a Marine Electrician and laughed at me when I showed it to him.  However, when I tested 24 batteries (12 new, 12 old) the results this tester gave me were all within 5% of a "professional" battery load tester.  It's certainly "good enough" to let you know if you battery is good or not.

Mark
SM #440 Cara
Dealer, MD USA
 


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

Alex Ramseyer <alexramseyer@...>
 

Dear Amelians, thank you all for your great input. I'm working on it and will have to find parts needed here in Grenada. Will let you know how I progress..
Cheers, Alex

On ‎Friday‎, ‎October‎ ‎27‎, ‎2017‎ ‎09‎:‎11‎:‎11‎ ‎AM‎ ‎BOT, mfmcgovern@... [amelyachtowners]


 

Alex,


I recommend that you buy one of these or similar:  https://www.amazon.com/BA7-100-1200-Electronic-Battery-System/dp/B0015PI7A4

My dock neighbor is a Marine Electrician and laughed at me when I showed it to him.  However, when I tested 24 batteries (12 new, 12 old) the results this tester gave me were all within 5% of a "professional" battery load tester.  It's certainly "good enough" to let you know if you battery is good or not.

Mark
SM #440 Cara
Dealer, MD USA
 


Battery Tester

Mark Erdos
 

I have one of these (recommended by Bill R.) They work well and are perfect for my limited needs. Very easy to use.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Grenada

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Friday, October 27, 2017 9:11 AM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: ONAN Generator not starting

 

 

Alex,

 

I recommend that you buy one of these or similar:  https://www.amazon.com/BA7-100-1200-Electronic-Battery-System/dp/B0015PI7A4

 

My dock neighbor is a Marine Electrician and laughed at me when I showed it to him.  However, when I tested 24 batteries (12 new, 12 old) the results this tester gave me were all within 5% of a "professional" battery load tester.  It's certainly "good enough" to let you know if you battery is good or not.

 

Mark

SM #440 Cara

Dealer, MD USA

 


Re: [Amel Yacht Owners] Main furler motor issue

Duane Siegfri
 

Garulfo,

I haven't removed the top seal in your type of furler, but if you review the posts/photos on removing the oil seals for the C-Drive there is one that recommends the following procedure.  Run two screws into the oil seal across from each other, then attach a slide hammer to each screw and back it out a bit at a time from each screw.  The downside to this is that you're truly committed once you run the screws into the seal.  Use the largest screw that will fit to avoid a pullout as you slide-hammer it.  You might try using a penetrating oil the night before to lubricate the surfaces of the the oil seal.

This worked for me on the C-drive oil seals.

Duane
Wanderer, SM#477




Re: ONAN Generator not starting

mfmcgovern@...
 

Alex,

I recommend that you buy one of these or similar:  https://www.amazon.com/BA7-100-1200-Electronic-Battery-System/dp/B0015PI7A4

My dock neighbor is a Marine Electrician and laughed at me when I showed it to him.  However, when I tested 24 batteries (12 new, 12 old) the results this tester gave me were all within 5% of a "professional" battery load tester.  It's certainly "good enough" to let you know if you battery is good or not.

Mark
SM #440 Cara
Dealer, MD USA
 


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

Bill & Judy Rouse <yahoogroups@...>
 

Bill K,

The reason is that in the SM2k, the 12VDC cable to the generator is twice as long as the engine. You know the math. Yada, yada. 


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

   

On Oct 26, 2017 21:55, "greatketch@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Is it likely (or even possible?) that the battery could start the main engine but NOT the generator?


Is the generator starting system more sensitive to low voltage for some reason?


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

Alexandre Uster von Baar
 

Interesting as, just looking at the size of the starters, I would “guess” the engine would require more amp than the generator to start…
If the engine starts, could it be poor/degraded electrical connection to the generator?
Would be interesting to measure voltage, etc.

Sincerely, Alexandre



--------------------------------------------

On Fri, 10/27/17, mfmcgovern@yahoo.com [amelyachtowners] <amelyachtowners@yahoogroups.com> wrote:

Subject: [Amel Yacht Owners] Re: ONAN Generator not starting
To: amelyachtowners@yahoogroups.com
Date: Friday, October 27, 2017, 6:57 AM


 









Yes it's possible for the starting battery to
start the engine but not the generator. When I bought our
SM the starting battery was almost dead. The engine would
start fine but the generator would not start at all. We had
to start the engine first in order the start the generator
until we changed out the battery.



Mark

SM #440 Cara

Deale, MD USA


Re: ONAN Generator not starting

mfmcgovern@...
 

Yes it's possible for the starting battery to start the engine but not the generator. When I bought our SM the starting battery was almost dead. The engine would start fine but the generator would not start at all. We had to start the engine first in order the start the generator until we changed out the battery.

Mark
SM #440 Cara
Deale, MD USA


Re: [Amel Yacht Owners] Re: how do I use the oven?

Ian Park
 

Ryan
My Santorin was fitted with the Eno Gascoigne, which was a two burner version (1994). It was a very solidly built stove, but Eno France) had no spares at all for it. We replaced with a new Eno. The quality of this one is nowhere near as good. Within a year of beginning our cruising life I had a list of replacements which Eno did replace at no charge. Eno now own Force Ten cookers.
My original Eno ended up in a friends boat and he did manage to locate parts that did fit, but not from Eno.
If you are going to replace I suggest you spend a bit more than you would on an Eno. The cooker does as much work as the engine!!
Ian
Ocean Hobo SN96


Re: [Amel Yacht Owners] Re: ONAN Generator not starting

greatketch@...
 

Is it likely (or even possible?) that the battery could start the main engine but NOT the generator?

Is the generator starting system more sensitive to low voltage for some reason?


Re: ONAN Generator not starting

Alan Leslie
 

It could be the relay in the negative battery feed to the starter. This has been a not uncommon problem.Like your main engine, the ONAN electrics are isolated from ground. When you press the start button that should activate not only the starter solenoid but also the relay in the negative feed. The negative relay is located on the port side of the ONAN, if you lean over the ONAN and look down, about half way along,with a torch, you'll see it.
I had this problem and it was loose connections at the relay.
Good luck
Cheers
Alan
Elyse SM437