Date   

Re: air conditioning maramu

Jacob Champness
 

Thanks Craig.

I take you were able to use the existing raw-water through-hull then?  Or did you need to add new a through-hull?

Thanks!
Jacob Champness
svlark.com
Maramu #42
Brunswick, GA


Re: air conditioning maramu

Jacob Champness
 

Hey Jer.

Did he or you end up using the air frais ducting then or add new ducting?
Thanks,
Jacob
Lark
Maramu #42
Brunswick, GA


Re: air conditioning maramu

Jacob Champness
 

Thanks Bill.


Re: Volvo parts

Alexander Ramseyer
 
Edited

Hi Paul,
This is the list of Volvo parts that I still have. Let me know what you want and I spare them for you until November. You can write back to alexramseyer@.... Anyone else interested, let me know as I don't think Paul wants to have all the parts.
Best, Alex

3 Oil Filter
2 Air Filter
1 Air Filter Housing (used)
2 Belt
1 Tensioner
3 Timing Belt
6 Diesel Filter
2 Impeller
1 Fuel Filter Kit / Hand Pump (used)
1 Fuel Filter Kit / Hand Pump (new)
1 Impeller Housing Cap
1 Raw Water Pump (refurbished by Volvo dealer)
1 Raw Water Pump (used, not refurbished)
1 Gasket for Turbo
1 Starter solenoid (Valeo)
1 Starter Motor
1 Instrument (Warning lamps)
1 Instrument (RPM gauge)
1 24 Volt Alternator, 110A, 2,5 years old, incl. original Regulator
1 12Volt Alternator, original, refurbished by Lauderdale Alternators, never used since
1 Oil cooler (used for 1 month only)
1 ZF Gear Box (located in Saint Martin)

I think Arno wanted the black computer box, but not 100% sure at this time. That part is also located in Saint Martin


Re: Volvo parts

Mohammad Shirloo
 

Hi Paul;

 

Please let me know what you have. We may be interested in some of the spares you have left. My e-mail mshirloo at transpacific.us

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Paul Dowd and Sharon Brown via groups.io
Sent: Wednesday, June 17, 2020 5:42 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Volvo parts

 

Hi Alex,

 

I would be interested in that. We do intend to be back probably in November.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alexander Ramseyer
Sent: 16 June 2020 21:37
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Volvo parts

 

Paul,

I changed my engine to Beta Marine and I still have tons of Volvo parts that I could give you for a good price. Will you be back in Grenada this season?

Fair winds, Alex


--
Cheers
Paul
Ya Fohi - Amel 54 #98


Re: Volvo parts

Paul Dowd and Sharon Brown
 

Hi Alex,

 

I would be interested in that. We do intend to be back probably in November.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alexander Ramseyer
Sent: 16 June 2020 21:37
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Volvo parts

 

Paul,

I changed my engine to Beta Marine and I still have tons of Volvo parts that I could give you for a good price. Will you be back in Grenada this season?

Fair winds, Alex


--
Cheers
Paul
Ya Fohi - Amel 54 #98


Re: Microwave oven on Amel 54

ngtnewington Newington
 

Thanks Randall, But no I don’t know anyone in Gib. I am sure I can find something on Amazon.

Kind regards

Nick
Amelia AML54-019 Kilada Greece.


On 16 Jun 2020, at 22:13, Randall <sailingalbedo@...> wrote:

Nick,
It's a long shot, but if you know somebody in Gibraltar, I would give it to you. As I have a new microwave and have no use for the rack I have.
Hope you know someone here. Let me know.
Cheers,
Randall

On Tue, Jun 16, 2020 at 10:33 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
I have lost the wire rack that fits inside the microwave oven on “Amelia”. I am in the UK and Amelia is in Greece. I want to order a replacement.

Does anyone know the size of this rack. It is circular and in the region of 20cm diameter? It sits on the rotating plate, and allows the oven to be used as a grill not just a microwave.

So I want to know the diameter and the height of the legs…..anyone able to help?

Thanks

Nick

Amelia stored ashore in Kilada Greece.
AML 54-019




Re: FW: Replacement HP hoses for Dessalator - UPDATE

Matt Salatino
 

Should be OK if 3/8” is indeed the fitting size you need. A 3/8” fitting is larger than 3/8”. You can google NPT fitting dimensions. On previous boat, only one fitting swiveled. Both swiveling is OK, a bit easier to assemble.

~~~⛵️~~~Matt

On Jun 17, 2020, at 12:47 AM, Mark Erdos <mcerdos@...> wrote:

I am wondering if someone who has ordered or understands HP hoses for the water maker would be kind enough to take a quick peek at this (before I push the buy button) and make sure this is correct:

 

HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

Code: HT-06-ASB

Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Overall Length: 3 feet 0 inches

 

These are about US$85 per 3’ hose assembled.

 

<image001.jpg>

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator

 

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 


Re: replacing mirrors in bathroom

Lior Keydar
 

Dear Alex

I replaced all the 5 mirrors on my A54 two years ago.
It was a big challenge to remove the glued mirror from the bathroom at the back. I did it with a string between the mirrors and the wood wall. There is a special thin and coarse string that is special made for it. I did not get it so I use a very thin metal string that was not so coarse. It took me a few hours to remove it. 
I have ordered the same glas mirrors in size and glued it with silicon. 

Best regards
Lior A54 #18


Re: FW: Replacement HP hoses for Dessalator - UPDATE

karkauai
 

On Kristy, 3ft would be enough, 4 would be better.

On Jun 16, 2020 10:26 PM, Mark Erdos <mcerdos@...> wrote:

Thanks Bill and Kent!

 

Bill, I just put in 3’ so I could get a rough cost. I haven’t actually measured it yet. You’re very observant.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, June 16, 2020 12:59 PM
To: main@AmelYachtOwners.groups.io Notification
Subject: Re: [AmelYachtOwners] FW: Replacement HP hoses for Dessalator - UPDATE

 

I do not know about the length. A SM with a D160 with membranes in the ceiling needs about 6' for each. Remember one hose is connected at the back of the control panel.

 

The rest looks good to me, just questioning length.

 

Bill 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Tue, Jun 16, 2020 at 5:43 PM Mark Erdos <mcerdos@...> wrote:

I am wondering if someone who has ordered or understands HP hoses for the water maker would be kind enough to take a quick peek at this (before I push the buy button) and make sure this is correct:

 

HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

Code: HT-06-ASB

Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Overall Length: 3 feet 0 inches

 

These are about US$85 per 3’ hose assembled.

 

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator

 

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 



Re: FW: Replacement HP hoses for Dessalator - UPDATE

Mark Erdos
 

Thanks Bill and Kent!

 

Bill, I just put in 3’ so I could get a rough cost. I haven’t actually measured it yet. You’re very observant.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, June 16, 2020 12:59 PM
To: main@AmelYachtOwners.groups.io Notification
Subject: Re: [AmelYachtOwners] FW: Replacement HP hoses for Dessalator - UPDATE

 

I do not know about the length. A SM with a D160 with membranes in the ceiling needs about 6' for each. Remember one hose is connected at the back of the control panel.

 

The rest looks good to me, just questioning length.

 

Bill 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Tue, Jun 16, 2020 at 5:43 PM Mark Erdos <mcerdos@...> wrote:

I am wondering if someone who has ordered or understands HP hoses for the water maker would be kind enough to take a quick peek at this (before I push the buy button) and make sure this is correct:

 

HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

Code: HT-06-ASB

Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Overall Length: 3 feet 0 inches

 

These are about US$85 per 3’ hose assembled.

 

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator

 

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 


Re: air conditioning maramu

mr_hermanns
 

Hey Guys!

I bought Eric Lindholms Maramu back in 2012. Since then i’ve upgraded the HVAC to a new 2018 Marine Air EnviroComfort Air Conditioning with Reverse Cycle Heat Retrofit Kit from Defender.

This unit pushes more air and is also quieter!

Cheers,
Jer
--
Jeremy Hermanns - "Jer"
SVCerulean.com
Maramu #105
Marina Del Rey, CA


Re: FW: Replacement HP hoses for Dessalator - UPDATE

karkauai
 

Hi Mark,
That sounds right, but am not certain of the thread size, I would encourage you to insist on 316 stainless.
Kent
SM243
Kristy

On Jun 16, 2020 6:47 PM, Mark Erdos <mcerdos@...> wrote:

I am wondering if someone who has ordered or understands HP hoses for the water maker would be kind enough to take a quick peek at this (before I push the buy button) and make sure this is correct:

 

HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

Code: HT-06-ASB

Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Overall Length: 3 feet 0 inches

 

These are about US$85 per 3’ hose assembled.

 

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator

 

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 



Re: FW: Replacement HP hoses for Dessalator - UPDATE

 

I do not know about the length. A SM with a D160 with membranes in the ceiling needs about 6' for each. Remember one hose is connected at the back of the control panel.

The rest looks good to me, just questioning length.

Bill 
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Jun 16, 2020 at 5:43 PM Mark Erdos <mcerdos@...> wrote:

I am wondering if someone who has ordered or understands HP hoses for the water maker would be kind enough to take a quick peek at this (before I push the buy button) and make sure this is correct:

 

HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

Code: HT-06-ASB

Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Overall Length: 3 feet 0 inches

 

These are about US$85 per 3’ hose assembled.

 

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator

 

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 


Re: wiring schematic

 

The 54 has the socket, the SM does not have the socket unless the option was purchased.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Jun 16, 2020 at 4:33 PM Arno Luijten <arno.luijten@...> wrote:
Hi Ulrich & Randall,

Our Amel does not have the dive compressor. However the 230 Volt plus is still installed in the port lazarette. It's one of those blue, big ones like for shore power plugs.

I'm a bit surprised by the inflator plug as present in the schematic diagram. Our Amel 54 does not have a 24 Volt socket in the rear lazarette but it does have a 230 Volt socket in this lazarette. It also came with an inflator pump running on 230 Volt. So it could be that Amel changed the voltage for the inflator at some point.

Regards,

Arno Luijte
SV Luna,
A54-121


Re: Replacement HP hoses for Dessalator

 

Mark,

Here are a few PEARS from my book:

image.png
image.png


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Jun 16, 2020 at 3:40 PM Mark Erdos <mcerdos@...> wrote:

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 


FW: Replacement HP hoses for Dessalator - UPDATE

Mark Erdos
 

I am wondering if someone who has ordered or understands HP hoses for the water maker would be kind enough to take a quick peek at this (before I push the buy button) and make sure this is correct:

 

HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

Code: HT-06-ASB

Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)

Overall Length: 3 feet 0 inches

 

These are about US$85 per 3’ hose assembled.

 

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator

 

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 


Re: wiring schematic

Arno Luijten
 

Hi Ulrich & Randall,

Our Amel does not have the dive compressor. However the 230 Volt plus is still installed in the port lazarette. It's one of those blue, big ones like for shore power plugs.

I'm a bit surprised by the inflator plug as present in the schematic diagram. Our Amel 54 does not have a 24 Volt socket in the rear lazarette but it does have a 230 Volt socket in this lazarette. It also came with an inflator pump running on 230 Volt. So it could be that Amel changed the voltage for the inflator at some point.

Regards,

Arno Luijte
SV Luna,
A54-121


Re: Microwave oven on Amel 54

Randall Walker
 

Nick,
It's a long shot, but if you know somebody in Gibraltar, I would give it to you. As I have a new microwave and have no use for the rack I have.
Hope you know someone here. Let me know.
Cheers,
Randall

On Tue, Jun 16, 2020 at 10:33 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
I have lost the wire rack that fits inside the microwave oven on “Amelia”. I am in the UK and Amelia is in Greece. I want to order a replacement.

Does anyone know the size of this rack. It is circular and in the region of 20cm diameter? It sits on the rotating plate, and allows the oven to be used as a grill not just a microwave.

So I want to know the diameter and the height of the legs…..anyone able to help?

Thanks

Nick

Amelia stored ashore in Kilada Greece.
AML 54-019



Re: Replacement HP hoses for Dessalator

Mark Erdos
 

Thanks Matt. That make perfect sense.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Matt Salatino via groups.io
Sent: Tuesday, June 16, 2020 10:50 AM
To: main@amelyachtowners.groups.io
Cc: AmelYachtOwners@groups.io
Subject: Re: [AmelYachtOwners] Replacement HP hoses for Dessalator

 

“food grade” is a misnomer here. The high pressure hoses are always carrying seawater, only filtered through a sediment filter. It’s not drinkable water. The product water comes from the other side of the membrane, under much lower pressure. That lower pressure hose should be suitable to move drinkable water. 

The key is to use stainless fittings on the high pressure hose ends to keep them from corroding.

~~~⛵️~~~Matt


On Jun 16, 2020, at 10:44 PM, Mark Erdos <mcerdos@...> wrote:

A call out to USA owners,

 

I have a box of supplies being assembled in the USA for shipment to Tahiti. I would like to include replacement HP hoses for the Amel installed D60 Dessalator. I am unsure of the exact specs for the fittings although I have searched the forum and think it is stainless steel 3/8 inch JIC fittings on all ends. The stuff I am unsure about is if the hose has to be “food grade” and the pressure rating.

 

Does anyone have a company from whom I can order on-line or better still provide me with a part number and e-tailer?

 

I have an email out to balcen.com (the USA Dessalator dealer) – I expect they supply it but am assuming it will be expensive and other options might prove more thifty.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us