1. main@AmelYachtOwners.groups.io
   Date   
Re: Hardtop for Amel 54

Brent Cameron
 

The nicest one I’ve seen is on the Amel 54 Soleil Bleu.  It looks like it could have come out of La Rochelle.
https://www.youtube.com/watch?v=DT7x0SjM648

Brent

On Jul 11, 2020, 11:11 AM -0400, Mohammad Shirloo <mshirloo@...>, wrote:

Thanks Barry;

 

I got permission from the previous owner of Caduceus A54 #56 to share the pictures of his hardtop. The following is the link to the pictures.

 

https://www.dropbox.com/sh/fr8okwqm43p6hsb/AADBRqNQw4VXvNSKDCVNT4afa?dl=0

 

Martin circumnavigated with this design and was very happy with it. I now see that Emek Marine has also installed one on a 54 in Turkey. Here’s the link:

 

https://www.facebook.com/emekmarin/posts/amel-54-hardtop-custom-designed-and-made-out-of-composite-lamination-amelyachts-/2003483773066512/

 

The hardtop makes sense in a lot of ways. As shown in the new Amel designs. I’m very interested in finding out your daily average Amp Hour output from your solar panels on your bimini top. This is where we would like to install ours and avoid an arch and the associated weight and interference with the sleek design, on the transom.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: Saturday, July 11, 2020 7:55 AM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Mohammad,

2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle.

Best

Barry😀⛵️<image001.jpg><image002.jpg>



On Jul 11, 2020, at 08:08, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

Thanks. As far as I can see the main thing was to move the pulley block, but I’m not on the boat now so can’t really compare.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 11 July 2020 00:55
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 




On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Brent Cameron

Future Amel Owner & Amel Owner Registry Moderator

Oro-Medonte, Ontario, Canada
Re: Hardtop for Amel 54

Mohammad Shirloo
 

Thanks Barry;

 

I got permission from the previous owner of Caduceus A54 #56 to share the pictures of his hardtop. The following is the link to the pictures.

 

https://www.dropbox.com/sh/fr8okwqm43p6hsb/AADBRqNQw4VXvNSKDCVNT4afa?dl=0

 

Martin circumnavigated with this design and was very happy with it. I now see that Emek Marine has also installed one on a 54 in Turkey. Here’s the link:

 

https://www.facebook.com/emekmarin/posts/amel-54-hardtop-custom-designed-and-made-out-of-composite-lamination-amelyachts-/2003483773066512/

 

The hardtop makes sense in a lot of ways. As shown in the new Amel designs. I’m very interested in finding out your daily average Amp Hour output from your solar panels on your bimini top. This is where we would like to install ours and avoid an arch and the associated weight and interference with the sleek design, on the transom.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: Saturday, July 11, 2020 7:55 AM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Mohammad,

2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle.

Best

Barry😀⛵️



On Jul 11, 2020, at 08:08, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

Thanks. As far as I can see the main thing was to move the pulley block, but I’m not on the boat now so can’t really compare.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 11 July 2020 00:55
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 




On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: Hardtop for Amel 54

Barry Connor
 

Hi Mohammad,
2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle.
Best
Barry😀⛵️


On Jul 11, 2020, at 08:08, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

Thanks. As far as I can see the main thing was to move the pulley block, but I’m not on the boat now so can’t really compare.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 11 July 2020 00:55
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 



On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: Cutting the main instrument display acrylic panel

Craig Briggs
 

Thanks, Billy - that was my guess and I see the 55 has that wide acrylic instrument pod. I should think you'll do fine with the oscillating blade. 
Good luck with it.
Hope you didn't get too much excitement with Tropical Cyclone "Fay" passing through your area yesterday.
Craig
Re: Is there a valve for the water intake for the washing machine?

CW Bill Rouse
 

Later model SM2ks had the following (photo from the Users Manual):
image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, Jul 11, 2020 at 7:27 AM Willem Kroes <kavanga@...> wrote:
Hi Elja,

Thank you for your fast reaction. I looked, but there is nothing under the gasoven or under the adjecent floor board. May be the Amel yard changed the piping infrastructure on later SM's.

Best regards,

Willem Kroes

SM#351 KAVANGA

now underway to Menidion

Re: Cutting the main instrument display acrylic panel

Billy Newport
 

Coder, Amel 55#56. Located in Liberty Landing, Jersey City, NJ, USA
Re: Is there a valve for the water intake for the washing machine?

Willem Kroes
 

Hi Elja,

Thank you for your fast reaction. I looked, but there is nothing under the gasoven or under the adjecent floor board. May be the Amel yard changed the piping infrastructure on later SM's.

Best regards,

Willem Kroes

SM#351 KAVANGA

now underway to Menidion
Re: Hardtop for Amel 54

Paul Dowd and Sharon Brown
 

Barry,

 

Thanks. As far as I can see the main thing was to move the pulley block, but I’m not on the boat now so can’t really compare.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 11 July 2020 00:55
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 



On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Cheers
Paul
Ya Fohi - Amel 54 #98
Re: Is there a valve for the water intake for the washing machine?

Elja Röllinghoff Balu SM 222
 

He Wilhelm ,
i think you find the valve for the wasching maschien under the last

under the last floor board in the kitchen under the gasoven

Best Elja SM Balu 222
On the way to Levkas

Von meinem iPhone gesendet
Is there a valve for the water intake for the washing machine?

Willem Kroes
 

Hello dear Amelians,

Finaly on board again of my SM in Greece,

I want to start sailing today, but there appeared a small problem.
 
The inlet valve of the washing machine will not close for 100%.  So I looked for a valve in the water intake line. I can't find it. Is there a valve (like the one for the dish washer; this one is easy to see)?

Best regards,

Willem Kroes

SM#351 KAVANGA

Preveza, Greece
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)

Craig Briggs
 

While cold seawater is, indeed, much better at cooling than warm water, it is less efficient for our refrigeration systems. Having the cooling water be at about the condensing temperature of the refrigerant is ideal. Typically, systems are most efficient with 90 degrees F / 32 C sea water (varies with the refrigerant). At much lower temperatures, like 55F/13C up north, the system will operate with a lower suction pressure and the pressure across the expansion valve is reduced which decreases system capacity and increases running times. We've got a gate valve on the sea water outlet that can be partially closed in very cold water to restrict flow and increase temperature. Put your hand on the drier or receiver and it should be about body temp. Recirculating the fresh water in your tank instead of using sea water is great and has the added benefit of keeping the beer cold when you're on the hard. 
Cheers, Craig 
Re: Santorin Bow Thruster/genoa furler breaker.

Craig Briggs
 

Ian,
On our SN (#68) the bow thruster and Foc furler are hard wired with no fuse or circuit breaker (diruptor). Real men don't need them ;-)
The 100amp fuse (mine is Blue Seas pop-up breaker style) is for the anchor windlass.

The main 12v power only kills power to the relay switches at the helm (same as turning off the "joy stick" breaker on the main DC panel). So when you say turning that off still left the BT and furler live, you were probing at the BT solenoid line terminals (not load), right, and the solenoids were actually inoperable from the helm switches. That seems safe enough, that is, you couldn't accidentally operate them from the helm. 

If you want to actually kill the power to the bow thruster and furler, just turn off your main battery switch - remote twist handle in the port cockpit lazarette locker, next to the helm.  If you have a fuse in the main battery feed, that's your safety for a dead short at the furler/bow thruster. If not you'll have one heck of a cabin heater. 

Cheers, Craig 
Re: Dive Compressor on a SM

eric freedman
 

Years ago when I used to cave dive. we used an aircraft government surplus 3000 psi compressor. it was about 10 inches in diameter and about 14 inches high.
They used to cost about $300- I still see the on ebay from time to time. The filters were the expensive part of the setup.
We needed this setup as where we dived was in the boondocks.
You might look into it.
Fair Winds,
Eric
sm 376

On July 10, 2020 at 12:13 AM Mark Erdos <mcerdos@...> wrote:

Do it – it’s only money.

 

We have one. It’s not hard to maintain and I can fill a tank to 3200psi in about 20 mins.

 

Think about all the many locations in French Polynesia where you can’t get tanks filled. Having the compressor opens up a whole new world for sailors who dive.

 

Opps! Sorry. You wanted reasons not to do it. Can’t think of any other than you might miss the storage space and your boat will list more to port than it does now.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Thomas Kleman
Sent: Thursday, July 9, 2020 5:07 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Dive Compressor on a SM

 

OK- I have hull #422 (a red line) and each day I wistfully look at that un-used dive compressor breaker on the 220 volt panel and feel like it's talking to me. My wife and I are enthusiastic divers heading (hopefully) back to Polynesia where diving would be fun and not always close to a dive shop.
There is even a comprehensive design for a sliding drawer mounting in the aft  port cockpit lazarette I like on this very site. I am in Hawaii, have access to Home Depot and shipping (the Bauer Jr II) comes from Seattle ...it's all so tempting.

The logical part of my brain, however reminds me that it's noisy, represents another system to maintain, $5000 to buy and install myself, and would doubtless raise the cost of diving based on my accounting driven cost per tank assumptions and those I've read done by others.

But I kind of want it. Anyone out there with some bit of pessimism or wisdom to stop me ?

Tom and Kirstin
SV L'ORIENT
Honelei Bay, Kauai


 

 

Re: Hardtop for Amel 54

Mohammad Shirloo
 

Thanks Barry;

 

We ended up scrapping our season in the Med. They wouldn’t let us in anyway, since we are doing so great in the US. The new strategy is, stop looking and the problem will go away. It would be great if boats worked the same way.

 

Looking forward to your input. If you have been able to fit 1200 Watts on the cockpit cover, that is great. Can you share the manufacturer and model number of the panels you used? Hi to Penny from both of us.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: Friday, July 10, 2020 2:40 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Mohammad,

 

Hope you and Aty are doing OK. Not being able to sail freely is a big down for our system.

Today I found the local company here in Le Marin, Martinique who have made a hardtop for a 54. Due to holidays I will not talk to them until next Wednesday. If they have a good mold I would want them to increase the height by a few inches. I will let you know next week after I see them. My Bimini solar panels are 12v 100amp. These are being tested next week after the acid stuff was spilt all over them last year in Tunisia. I will let you know also about these next week.

I am now going ahead with the Lithium batteries with Olivers (Amel 54 Vela Nautica II)

help. With this virus thing I think we will be here for this year.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel54. #17

Sainte Anne anchorage Martinique 



On Jul 10, 2020, at 17:06, Mohammad Shirloo <mshirloo@...> wrote:



Hi Barry;

 

We have been looking at adding the hardtop for a while and plan on doing it in 2022 due delays caused by COVID-19. Since it appears you have added solar to your cockpit top, which is what we are planning, I wanted to know the impact of shading on your solar panels. How many watts of solar panels do you have installed and what kind of output in Amp Hours due you get on a typical day?

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: Friday, July 10, 2020 1:55 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

<image001.jpg>

<image002.jpg>

<image003.jpg>

<image004.jpg>

Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 




On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: Hardtop for Amel 54

Barry Connor
 

Hi Mohammad,

Hope you and Aty are doing OK. Not being able to sail freely is a big down for our system.
Today I found the local company here in Le Marin, Martinique who have made a hardtop for a 54. Due to holidays I will not talk to them until next Wednesday. If they have a good mold I would want them to increase the height by a few inches. I will let you know next week after I see them. My Bimini solar panels are 12v 100amp. These are being tested next week after the acid stuff was spilt all over them last year in Tunisia. I will let you know also about these next week.
I am now going ahead with the Lithium batteries with Olivers (Amel 54 Vela Nautica II)
help. With this virus thing I think we will be here for this year.

Very Best

Barry and Penny
“SV Lady Penelope II”
Amel54. #17
Sainte Anne anchorage Martinique 


On Jul 10, 2020, at 17:06, Mohammad Shirloo <mshirloo@...> wrote:



Hi Barry;

 

We have been looking at adding the hardtop for a while and plan on doing it in 2022 due delays caused by COVID-19. Since it appears you have added solar to your cockpit top, which is what we are planning, I wanted to know the impact of shading on your solar panels. How many watts of solar panels do you have installed and what kind of output in Amp Hours due you get on a typical day?

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: Friday, July 10, 2020 1:55 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

<image001.jpg>
<image002.jpg>
<image003.jpg>
<image004.jpg>
Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 



On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: Hardtop for Amel 54

Mohammad Shirloo
 

Hi Barry;

 

We have been looking at adding the hardtop for a while and plan on doing it in 2022 due delays caused by COVID-19. Since it appears you have added solar to your cockpit top, which is what we are planning, I wanted to know the impact of shading on your solar panels. How many watts of solar panels do you have installed and what kind of output in Amp Hours due you get on a typical day?

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: Friday, July 10, 2020 1:55 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54

 

Hi Paul,

I have attached some photos showing how I raised the boom line.

 

Very Best

 

Barry and Penny

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

 



On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: Hardtop for Amel 54

Barry Connor
 

Hi Paul,
I have attached some photos showing how I raised the boom line.

Very Best

Barry and Penny
“SV Lady Penelope II”
Amel 54.  #17
Sainte Anne anchorage Martinique 



On Jul 10, 2020, at 03:47, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

This is something I’ve been interested in too. What changes did you make to the boom line? Would you have a photo?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 10 July 2020 00:42
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Hardtop for Amel 54

 

Hello Amel 54 owners,

I have seen and been onboard some Amel 54's with custom Hardtops. Most are a little low in height.
We are in Martinique since March and will probably be here for some time as the Caribbean is not looking to be opening up for sailing soon.
A good time to undertake some projects. 
Do any Amel 54 owners have any recommendations for getting a custom made hardtop manufactured in the Caribbean? I would like to explore this possibility, I currently have had made a 5 bow Bimini with 6ft clearance under. I am looking for someone in the Caribbean who has made a Hardtop for a 54 or If I could find someone who does good fibre glass. I think I might be able to get a hardtop with 6ft clearance under as I have already made the changes to the boom line which had previously limited the height of hardtops and a bimini.
Would appreciate any advise from members who have any info for this project.

Best Regards

Barry and Penny
"SV Lady Penelope II"
Amel 54.  #17
Sante Anne anchorage Martinique 


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)

Porter McRoberts
 

All excellent points Scott.
Cold seawater is much better at cooling than warm seawater!!!

We actually installed an air-cooled compressor for the main deep freeze, so its not in the circuit.  That has helped with unsyncronized pump demand, but it does heat up the galley a bit.  

All are waiting for the brushless solution.

Thanks,

Porter/IBIS
A54-152


On Jul 10, 2020, at 4:03 PM, Scott SV Tengah <Scott.nguyen@...> wrote:

Porter - I run freshwater through the pump so scale/lime isn't really affecting me. Pump still dies prematurely.

The Frigoboat UK spec'd pump (4105-343 Flojet) is 24v and flows 3.3gpm. The Frigoboat compressors require 1gpm per the VECO documentation. Per my earlier post from Penguin UK, the concept is that a 24v pump running on 12v will be acceptable for continuous duty - that is not the case obviously.

Rudolf - Mohammad Shirloo, in the Med, has the same longevity as you. Apparently his pump has lasted over a decade. But two things help explain that:

1) Neither of you are full time.
2) Both of you are in the cooler Med.

Oliver said that after he changed the insulation on his galley freezer, his pump was running 15% (or thereabouts) duty cycle in Portugal. Now that he's in the tropics, it's up to 75% duty cycle. This mirrors my experience as my Flojet pump lasted far longer when I was in the Med. 

It appears the combination of higher ambient temperatures and higher water temperatures when he left the Med increased his pump usage by 5x. 

Curious - do you run the freezer? We often run two fridges and the freezer. With the three "unsynchronized" compressors, the pump runs nearly 24/7.

And with longer continuous running periods, the brush temp goes up a lot. And above a certain temp, brush wear appears to be exponentially higher. 

Based on this, we are trying to find a brushless solution.


On Fri, Jul 10, 2020 at 7:47 AM Rudolf Waldispuehl <Rudolf@...> wrote:

Hi Dean, 

You’re absolutely correct with the E51385 Interface. 

 

Yes, all ok on WASABI and hope you both are well doing too. BTW: we will winterize in Spain this year and postponed the Atlantic crossing to next season. 

Cheers 

Ruedi


Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of Dean Gillies <stella@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Freitag, 10. Juli 2020 um 15:09
An: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Betreff: Re: [AmelYachtOwners] New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)

Hi Ruedi,
Hope you and Sabine are well, and enjoying sailing once more.

I agree entirely with your description of the Danfoss-E51385 interface.

To make it maybe a little clearer, in our 24V boat the F pin is driven to +12V to enable the pump. Otherwise it floats (is disconnected) electrically. When it is driven to 12V, then the voltage between the + pin and the F pin is 24-12 = 12V. This is what triggers either the 51385 box or Bill's 12V relay. 

As you say, all of this is unrelated to the pump longevity problem. 

Best regards
Dean




-- 
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)

Scott SV Tengah
 

Porter - I run freshwater through the pump so scale/lime isn't really affecting me. Pump still dies prematurely.

The Frigoboat UK spec'd pump (4105-343 Flojet) is 24v and flows 3.3gpm. The Frigoboat compressors require 1gpm per the VECO documentation. Per my earlier post from Penguin UK, the concept is that a 24v pump running on 12v will be acceptable for continuous duty - that is not the case obviously.

Rudolf - Mohammad Shirloo, in the Med, has the same longevity as you. Apparently his pump has lasted over a decade. But two things help explain that:

1) Neither of you are full time.
2) Both of you are in the cooler Med.

Oliver said that after he changed the insulation on his galley freezer, his pump was running 15% (or thereabouts) duty cycle in Portugal. Now that he's in the tropics, it's up to 75% duty cycle. This mirrors my experience as my Flojet pump lasted far longer when I was in the Med. 

It appears the combination of higher ambient temperatures and higher water temperatures when he left the Med increased his pump usage by 5x.

Curious - do you run the freezer? We often run two fridges and the freezer. With the three "unsynchronized" compressors, the pump runs nearly 24/7.

And with longer continuous running periods, the brush temp goes up a lot. And above a certain temp, brush wear appears to be exponentially higher. 

Based on this, we are trying to find a brushless solution.


On Fri, Jul 10, 2020 at 7:47 AM Rudolf Waldispuehl <Rudolf@...> wrote:

Hi Dean, 

You’re absolutely correct with the E51385 Interface. 

 

Yes, all ok on WASABI and hope you both are well doing too. BTW: we will winterize in Spain this year and postponed the Atlantic crossing to next season.

Cheers 

Ruedi


Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of Dean Gillies <stella@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Freitag, 10. Juli 2020 um 15:09
An: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Betreff: Re: [AmelYachtOwners] New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)

Hi Ruedi,
Hope you and Sabine are well, and enjoying sailing once more.

I agree entirely with your description of the Danfoss-E51385 interface.

To make it maybe a little clearer, in our 24V boat the F pin is driven to +12V to enable the pump. Otherwise it floats (is disconnected) electrically. When it is driven to 12V, then the voltage between the + pin and the F pin is 24-12 = 12V. This is what triggers either the 51385 box or Bill's 12V relay. 

As you say, all of this is unrelated to the pump longevity problem. 

Best regards
Dean


--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com
Re: Dive Compressor on a SM

hanspeter baettig
 

Hello Paul
Can you please send me your contact infos for the Coltri dive compressor. I'm hesitating between the Bauer Junior and Coltri. I know the Coltri Company in Italy.
You can email me direct; hanspeter dot baettig at bluemail dot ch
Thanks 
Hanspeter
SM 16, Tamango 2

----Ursprüngliche Nachricht----
Von : paulguenette@...
Datum : 10/07/2020 - 14:42 (BZ)
An : main@AmelYachtOwners.groups.io
Betreff : Re: [AmelYachtOwners] Dive Compressor on a SM

Hi Thomas,

I recently purchased a Coltri MCH 6 single phase 220 volt 50 hz with a inox stainless steel frame for $3,500.00 that fits nicely into the space. I am happy with it. I can send you the contact information for the company and person purchased it from if you wish,  (they gave me a good price on some Mares diving gear too).  If you do not have scuba tanks yet, let me know, I have a good contact for those too.

(I met you and Kirstin briefly on the docks at Shelter Island marina in Panama, April 2019)

Cheers, Paul

Aramis, SM 2000 - 444,  San Francisco Bay, California 

3021 - 3040 of 56035  
More
Home Messages Hashtags Subgroups About Features Pricing Updates Terms Help Twitter