Date   

Re: Hardstand storage Greece

Jose Alegria
 

Paul hi

Cleopatra Marina- Preveza
Nice yard service - contact Grigoris Psofakis at  techdep@...
Merit is at Cleopatra Marina dry dock from last September- they do all kind of jobs very attentively


Regards

José Alegria
A55#003MERIT
josealegr@...
Mobile: + 351 91 866 30 37




On Wed, 11 Mar 2020 at 22:18, Paul Brown <feeder.brown@...> wrote:
Thanks Ian and Judy, I will check them out

Regards, Paul... Sent from my iPhone

On 12 Mar 2020, at 09:16, ianjenkins1946 <ianjudyjenkins@...> <ianjudyjenkins@...> wrote:


Hi Paul,

We have had good experiences at both Cleopatra Marina , Preveza in the Ionian and Basimapokoulos Shipyard in Kilada in the Aegean.

Lots of Amels in both. Good range of services in the former, adequate in the latter.  We have heard of good services at Lavrion, the nearest to Athens airport, but pricey.

 Ian and Judy, Pen Azen, SM 302, Kilada

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Paul Brown <feeder.brown@...>
Sent: 11 March 2020 21:58
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Subject: [AmelYachtOwners] Hardstand storage Greece
 
Dear Amel Owners Group,

I am considering storing my Amel on the hardstand for 8-12 months from August this year and inquiring for any recommendations from the group for value and good service available, preferably Greece or Italy but happy to consider other locations in the MED.

Please reply with any assistant and thank you very much in advance.

Kind regards, Paul - FORTUNA II 55#17


Re: Hardstand storage Greece

Paul Brown
 

Thanks Ian and Judy, I will check them out

Regards, Paul... Sent from my iPhone

On 12 Mar 2020, at 09:16, ianjenkins1946 <ianjudyjenkins@...> <ianjudyjenkins@...> wrote:


Hi Paul,

We have had good experiences at both Cleopatra Marina , Preveza in the Ionian and Basimapokoulos Shipyard in Kilada in the Aegean.

Lots of Amels in both. Good range of services in the former, adequate in the latter.  We have heard of good services at Lavrion, the nearest to Athens airport, but pricey.

 Ian and Judy, Pen Azen, SM 302, Kilada

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Paul Brown <feeder.brown@...>
Sent: 11 March 2020 21:58
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Subject: [AmelYachtOwners] Hardstand storage Greece
 
Dear Amel Owners Group,

I am considering storing my Amel on the hardstand for 8-12 months from August this year and inquiring for any recommendations from the group for value and good service available, preferably Greece or Italy but happy to consider other locations in the MED.

Please reply with any assistant and thank you very much in advance.

Kind regards, Paul - FORTUNA II 55#17


Re: Hardstand storage Greece

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

Hi Paul,

We have had good experiences at both Cleopatra Marina , Preveza in the Ionian and Basimapokoulos Shipyard in Kilada in the Aegean.

Lots of Amels in both. Good range of services in the former, adequate in the latter.  We have heard of good services at Lavrion, the nearest to Athens airport, but pricey.

 Ian and Judy, Pen Azen, SM 302, Kilada


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Paul Brown <feeder.brown@...>
Sent: 11 March 2020 21:58
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Subject: [AmelYachtOwners] Hardstand storage Greece
 
Dear Amel Owners Group,

I am considering storing my Amel on the hardstand for 8-12 months from August this year and inquiring for any recommendations from the group for value and good service available, preferably Greece or Italy but happy to consider other locations in the MED.

Please reply with any assistant and thank you very much in advance.

Kind regards, Paul - FORTUNA II 55#17


Hardstand storage Greece

Paul Brown
 

Dear Amel Owners Group,

I am considering storing my Amel on the hardstand for 8-12 months from August this year and inquiring for any recommendations from the group for value and good service available, preferably Greece or Italy but happy to consider other locations in the MED.

Please reply with any assistant and thank you very much in advance.

Kind regards, Paul - FORTUNA II 55#17


Re: In mast Furler - A simple precaution for the (occasionally) inattentive skipper

PAOLO CUNEO
 

Sorry, a cut and paste mishap, second paragraph of my previous message should obviously read “heath first before drilling.....”
Paolo Cuneo
Whisper

Inviato da iPad


Re: In mast Furler - A simple precaution for the (occasionally) inattentive skipper

PAOLO CUNEO
 

Hi all
Here some more info.
The material is 5mm polystyrene (see attached photo), bent using a hot air gun, and drilled/ rectified with the two 14 mm bits below..
Some practical tips :
Drill first before bending. In my first attempt, heating after drilling, the heat completely distorted the holes and I was forced to throw the piece.
Drill at both sides two pilot holes prior to full drilling to avoid fragmenting the edges and keep rpm as low as possible, whilst cooling with water during the operation: as soon as the temp increases, the material immediately melts making your tools unusable.
Heat the sheet uniformly on both sides, otherwise it will immediately crack, especially at the edges.
Heat bending is, at least for me, an awkward process and, if I had to replicate the piece, I would probably opt for a flat piece of polystyrene and four small s/steel legs at the four corners, or, to the same effect two “U” shaped brackets on two opposite sides, perhaps a less stylish solution but much much simpler to make.
Obviously, if the boat is at hand, to produce a template directly on the spot is the obvious choice. Otherwise, as soon as the Covid-19 restrictions of movement currently in force in Italy are lifted, I’ll produce a drawing with all the measurements

Best
Paolo Cuneo
SM #454 Whisper, currently in Genoa






Inviato da iPad


Re: Propeller. Bowthruster lost. Sm435

Arthur Sundqvist
 

Thank you all!
I scubadived and mounted the new Bowthrusterpropeller, delrinhub and new nylon screws..... I usel mmM8. Stainless steelsqrews as Kevin pointers out. 30 minutes in Water and preparing sqrews took 1 hour. I Sidney have the tight length . But I trimmed and modifyed what I had. The propeller sits tight with is importstopp..


Parts for sale from Alex Uster formerly NIKIMAT

Alexandre Uster von Baar
 

Good afternoon, 

Just updated the share parts for sale.  

I will also regularly update/add my page:  

http://nikimat.com/parts_for_sale/



After learning I paid way too much for the mizzen, I lowered the price of the sails. 

I might have someone interested, If not, the new prices are $1500 for the like New Mizzen.  $1000 for the Genoa and $500 for the Main. 

I will give a discount if someone buys all 3.  


Just posted for sale: 

Bow Thruster foot

Aft Cabin Cushion

Standing & running rigging parts

Volvo TMD 22 P

Air conditioning parts

Onan generator parts (Note that while I had the MDKAL B Specs some parts as indicated are compatible for the following models: MDKAV & MDKBL, MDKBL, MDKBM)



Thanks in advance, sincerely, Alexandre

Formerly SM2K #289 NIKIMAT
_._,_._,_


Re: Water Detection - Cleaning the fuel tank

Mark & Debbie Mueller
 

There is a product called Kolor Kut Water Finding Paste that is used by fuel stations to determine if there is water in their fuel storage tanks.  With the Amel we can put some of this on the bottom of the fuel dipstick, lower the stick in the tank, bring it up and if water is present the paste turns red.  Wipe the residue off when done.  My understanding is that the diesel bug microbe lives in the water layer using the oxygen contained in the water to survive.  Whether true or not this is an inexpensive method to check for water, a small tube is $7.50 and should last for years.  This or similar products are available on Amazon and other sites.  KolorKut website information is below:

·         For testing for the presence of water at the bottom of fuel storage tanks.

·         Suitable only for use with Petrol, Diesel, Kerosene, Gas Oil, Heating Oil, Heavy Oil, and Lubricating Oil

·         Applied to a rod / length of string with bottom weight, the brown paste changes colour to brilliant red where it comes into contact with water, giving you a visual indication as to the depth of the water present. The water can then be pumped out, and the test repeated until there is insufficient water to pump, at which point one of our Water-Seekers or Oilybits Water Absorbing Polymer can be used to absorb the last of it.

·         No official expiry date, will keep best when stored between 31F and 115F

They also have other products for gauging miscible water in various fuels and how deep the water is in the tanks.   www.kolorkut.co.uk


--
Mark Mueller
Brass Ring  A54


Re: Volvo warning

Mark & Debbie Mueller
 

The Volvo Service Bulletin was received from an extremely helpful dealer, Fordham Marine, Jacksonville, FL  904.743.2140.  The other information I came across was when I had the same problem as Paul.  I was trying to find a method to determine what was wrong without having to pay a mechanic 2 1/2 hours travel time to come to the boat to diagnose then make a second trip back with the parts.  It seemed very inefficient and costly.  I heard about the OEM mode wanted to learn how to access it.  Wish I had all the codes but have not found a way to get them.  They do vary slightly between different engine models.
--
Mark Mueller
Brass Ring  A54


Re: Cleaning the fuel tank

Patrick McAneny
 

Cam, I had not thought about a shopvac ,I can reduce the hose down to a 3/4" piece of pvc tube. 
Thanks,
Pat
SM#123


-----Original Message-----
From: CAM WEATHERSTON <camweatherston@...>
To: main <main@amelyachtowners.groups.io>
Sent: Tue, Mar 10, 2020 10:23 pm
Subject: Re: [AmelYachtOwners] Cleaning the fuel tank

Hello,  we had to clean our fuel tank on our Tayana 37 and had pumped out most of the fuel. The grunge at the bottom was sucked out using a shopvac. Worked like a charm. Then spayed the inside with brake cleaning fluid....worked great.  Not a fun job....good luck with it.

On Tue, Mar 10, 2020 at 1:40 PM Dan Carlson <carlsdan61@...> wrote:
On a related note.  

I'm looking for the right material to replace the gaskets on the inspection ports.  Diesel is pretty hard on most gaskets.  I've tried two different "rubber" materials and have not been happy with either of them.  The second one was Nitrile, grade 60A. It was specifically recommended by the technical guy at Rubber-Cal for being best for deisel resistance, but it has deteriorate after a year or so.

Has anyone found a better product? 

Thanks and regards, Daniel Carlson on sv BeBe, SM#387




On Tue, Mar 10, 2020, 2:24 PM Patrick McAneny via Groups.Io <sailw32=aol.com@groups.io> wrote:
I have never cleaned a fuel tank and was wondering how one goes about it, I only now have about 10 gallons in the tank. Do you install a pump hose on the end of a length of 1/2 pcv tube and just move it around the bottom of the tank and see what comes out. Any suggestion on what type of pump.
Thanks,
Pat
SM#123


Re: Hatch handle seat (corners) for Goiot tradition series

Mike Longcor (SV Trilogy)
 

Hi Justin, thanks for the word of warning. I had my doubts about them just looking at their online site... needing to email or phone part numbers and waiting just to find out what things cost? Then finding very high prices, not even looking at shipping. I'm hoping Charles can sort me out with some CNC work.

Cheers,
Mike Longcor
SV Trilogy - SM23
Opua, NZ


Re: Hatch handle seat (corners) for Goiot tradition series

Mike Longcor (SV Trilogy)
 

Hi Charles,

That is awesome, nice work!

I might have to sketch the pieces I need because all of them are currently in use on my boat. Might need a couple other parts too, if possible. Curious how long does the process usually take from receiving sketch to product? Are you in USA?

I'll have a go at making up a detailed sketch for the corner seat and get back to you very soon.

Cheers,
Mike Longcor
SV Trilogy - SM23
Opua, NZ


Re: Circumnavigation

CARINA HAMMARLUND
 

Congratulations, what a fantastic achievement!
You are now in a small and exclusive group of people that can call themselves - circumnavigator.
well done 👏🏻👏🏻👏🏻
--
Carina
SV Ultimo
Amel 54 No 165


New Zealand surveyor

Nick Fowle
 

Hi, would anyone be able to recommend a surveyor down in N Island New Zealand please? 


ideally someone who has experience of Super Maramu if possible ? 


many thanks 


Re: Cleaning the fuel tank

CAM WEATHERSTON
 

Hello,  we had to clean our fuel tank on our Tayana 37 and had pumped out most of the fuel. The grunge at the bottom was sucked out using a shopvac. Worked like a charm. Then spayed the inside with brake cleaning fluid....worked great.  Not a fun job....good luck with it.

On Tue, Mar 10, 2020 at 1:40 PM Dan Carlson <carlsdan61@...> wrote:
On a related note.  

I'm looking for the right material to replace the gaskets on the inspection ports.  Diesel is pretty hard on most gaskets.  I've tried two different "rubber" materials and have not been happy with either of them.  The second one was Nitrile, grade 60A. It was specifically recommended by the technical guy at Rubber-Cal for being best for deisel resistance, but it has deteriorate after a year or so.

Has anyone found a better product? 

Thanks and regards, Daniel Carlson on sv BeBe, SM#387




On Tue, Mar 10, 2020, 2:24 PM Patrick McAneny via Groups.Io <sailw32=aol.com@groups.io> wrote:
I have never cleaned a fuel tank and was wondering how one goes about it, I only now have about 10 gallons in the tank. Do you install a pump hose on the end of a length of 1/2 pcv tube and just move it around the bottom of the tank and see what comes out. Any suggestion on what type of pump.
Thanks,
Pat
SM#123


Re: Volvo warning

Rudolf Waldispuehl
 

Hi Marc


Thanks for sharing these information. Great information, such Service Bulletin’s are vital. 

Question: I have seen these Volvo Penta Service  Bulletin“ once at the Volvo dealer. Are these public available from Volvo on request or by download?

- Or how you got those Service bulletins? 


Thanks for giving me one more item for the maintenance list ;-) 

Happy Sailing


Ruedi Waldispuehl
WASABI A54. #55

Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of Mark & Debbie Mueller <brass.ring@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Dienstag, 10. März 2020 um 19:29
An: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Betreff: Re: [AmelYachtOwners] Volvo warning

I had the same fault code with the last digit being "0".  I was able to lube and free up the actuator.  It could also indicate a bad sensor or another turbo related issue.  Take a look at the attached and be sure to read the comments that I added at the time.  Good luck with the repair.
--
Mark Mueller
Brass Ring  A54


Re: In mast Furler - A simple precaution for the (occasionally) inattentive skipper

Matt Salatino
 

Stay well!

~~~⛵️~~~Matt

On Mar 10, 2020, at 5:07 PM, PAOLO CUNEO <pc43ge@...> wrote:

Thanks  to all Amelians for their welcome and the interest for my suggestion.
 I cannot reach Whisper at the moment ( even if myself, my house, my business and my Amel are all located in Genoa) due the severe restrictions to movement introduced by the government in Italy following to the violent outbreak of Covid-19 Coronavirus in the  Country.
As soon as possible I will follow with some drawings and detail
Fair winds

Paolo Cuneo
SM#454 Whisper 
now quarantined (skipper included) in Genoa




Re: In mast Furler - A simple precaution for the (occasionally) inattentive skipper

Paul Osterberg
 

Thank's Paolo
I have thought about a similar solution myself. What material is it made of? Not plexiglas or Macralon I assume as they are not thermoplastic and not possible to bend by heat. I guess it might be made of a Polystyren sheet? I'm now inspired to try to make one myself 
Paul on SY Kerpa SM#259 wintering in Lagos, Portugal sykerpa.com


Re: Volvo warning

Matt Salatino
 

There is an excellent cleaner for burned on deposits that would work great for this application. It is a gun cleaning product called “Shooter’s Lube”.

~~~⛵️~~~Matt

On Mar 10, 2020, at 2:41 PM, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:

Thanks Mark. It’s pretty much what I did except I used WD40 and did not spray at the same time as moving the arm up and down – maybe I should try that. Maybe I should use Corrosion X instead?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Mark & Debbie Mueller
Sent: 10 March 2020 14:29
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Volvo warning

 

I had the same fault code with the last digit being "0".  I was able to lube and free up the actuator.  It could also indicate a bad sensor or another turbo related issue.  Take a look at the attached and be sure to read the comments that I added at the time.  Good luck with the repair.
--
Mark Mueller
Brass Ring  A54


--
Cheers
Paul
Ya Fohi - Amel 54 #98