|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
Hi Oliver,
Thanks for that. Any idea where I can get one? I’ve contacted a couple of dealers but no reply so far.
The other thing is that I don’t actually know what the problem is other than that it stopped working. I just assume the sensor because, like you say, it is the most exposed component. It also was intermittent for a while before stopping completely. Wolfgang from Elise suggested it might be the magnet so I probably should get one of those too.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: 01 September 2020 07:17 To: main@amelyachtowners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Hi Paul, It is a simple reed contact, example Meeder. Costs like 99 cents. Better order some spare, as the windlass is quite exposed to saltwater. When connected to the wire, dip it in sikkaflex or epoxy.
Oliver from Vela Nautica A54#39 Martinique
On Mon, Aug 31, 2020, 05:19 Paul Dowd and Sharon Brown <paul.dowd@...> wrote:
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|
|
|
Re: Bilge pump
Paul Dowd and Sharon Brown
Yes that’s right, close the seacock for a while with the fridge running, so it fills the manifold. Careful not to keep it closed too long though.
Paul Dowd Managing Director UK: +44 (0)7710 466619 skype: pauldowd
This e-mail (including attachments) may contain sensitive and/or confidential information. If received in error, its use by you is not authorised and may be unlawful. Please notify the sender and delete all copies immediately. E-mails may be subject to error, interference and virus and no liability is accepted for loss or damage however it arises and whether direct or indirect.
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alexis LETELLIER
Sent: 01 September 2020 09:02 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Bilge pump
Thx Paul. this said, it sounds like a different issue as my pump was working well for many days and suddenly stopped. But maybe your procedure would solve it the same way. -- Cheers Paul Ya Fohi - Amel 54 #98
|
|
|
|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
Thanks, I never thought about that. But how can a magnet “break”?
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Wolfgang Weber via groups.io
Sent: 31 August 2020 21:14 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Mostly you need a new magnet in the gipsy to count the length on the counter Wolfgang Weber SY Elise Amel 54 /162
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|
|
|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
No worries, I’m on the right track with this now. Thanks all the same.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alan Leslie
Sent: 01 September 2020 00:21 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Ah....54...no sorry -- Cheers Paul Ya Fohi - Amel 54 #98
|
|
|
|
Re: Bilge pump
Alexis LETELLIER
Indeed Arno, this flap is not in a proper shape anymore, and is likely to create an air leak.
About your second pump, you connected the out hose to the primary one with something like a T junction? No risk to go down back to the bildge through the primary out hose/pump? thx
|
|
|
|
Re: Bilge pump
Alexis LETELLIER
Thanks a lot Danny, interesting way to solve it, will keep that in mind. I just remember the hose was really hard to move and manipulate, not very flexible.
|
|
|
|
Re: Bilge pump
Alexis LETELLIER
Thx Paul. this said, it sounds like a different issue as my pump was working well for many days and suddenly stopped. But maybe your procedure would solve it the same way.
What do you mean filling from the fridge? You close the seacock from the outside? cheers
|
|
|
|
Re: Anchor chain counter
Oliver Henrichsen, SV Vela Nautica
Hi Paul, It is a simple reed contact, example Meeder. Costs like 99 cents. Better order some spare, as the windlass is quite exposed to saltwater. When connected to the wire, dip it in sikkaflex or epoxy. Oliver from Vela Nautica A54#39 Martinique
On Mon, Aug 31, 2020, 05:19 Paul Dowd and Sharon Brown <paul.dowd@...> wrote:
|
|
|
|
Re: SM2 Roller Reefer Guide Rods
Hi Dave, True confession, I have twice furled the headsail with the ballooner halyard in place. (I could say I was distracted by difficult “emergency” conditions, but that does not substitute for good seamanship.) Severed the halyard (that furling motor is powerful) AND bent over the guide rods. First time, utilizing some heat, simply bent them back straight. Second time, allowing for metal fatigue, decided to replace them. Picked up two 0.3125”x11” ss rods from OnlineMetals in CT for $2 ea ($7 shipping). Then threaded the end and used a pair of nuts and washers to secure to the swivel. Slipped some tubing over the exposed rod to soften the contact with the mast. Still works 4 years later. Mike Aletes SM#240 Rock Hall, MD
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of David Kurtz via groups.io
Sent: Sunday, August 30, 2020 5:42 PM To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] SM2 Roller Reefer Guide Rods
So... I returned to the boat to take a closer look at the roller furling swivel, which is down at deck level since the sail is not hoisted. The swivel turns freely, with no sign of jamming. And the ballooner has yet to be hoisted, so that’s not it. I’m going to fabricate a couple of temporary guide rods (until I can get originals from Amel) and hoist the sail with those. I still do not feel I have the answer to the bent rods. I’m just going to watch them more closely. Detroit, Michigan
|
|
|
|
Re: Anchor chain counter
Thomas Peacock
Yes, the 54 and SM are different in terms of chain counters. I’m pretty sure the SM “button” on the windlass is not magnetic, the proximity sensor only requires a metal counter.
toggle quoted messageShow quoted text
-- Tom Peacock SM 240 Aletes Chesapeake Bay
|
|
|
|
Re: Super Maramu Repower
Germain Jean-Pierre
Hello Mark and Nicky,
toggle quoted messageShow quoted text
Welcome aboard!!! If I had your situation, I would think more of an overhaul than Beta. Lots of spare parts available through Parts4engines.com. If after analysis, an engine swap is needed, the Beta would also be my choice Kind regards, Jean-Pierre Germain, Eleuthera, SM007, NZ
On 1/09/2020, at 2:14 AM, Mark Barter <markbarter100@...> wrote:
|
|
|
|
Re: Anchor chain counter
Ah....54...no sorry
I jumped the gun a bit there....you have a different windlass system to us. I should be more careful, I only know about SMs Cheers Alan Elyse SM437
|
|
|
|
Re: Super Maramu Repower
Dan Wilcox
A little over a year ago we re-powered Feierabend with a Beta 85 from the original Perkins M80T. Now we use less fuel, get significantly more torque, and have a quieter ride when we have to motor. With a maxProp we cruise at 7.8 knts @ 1800 rpms (2,700 is wide open). I'm located in Seattle area and typically we cruise year round. The engine now has 300+ hours with no issues. Thanks, Dan Wilcox Feierabend SM#86
On Monday, August 31, 2020, 07:14:27 AM PDT, Mark Barter <markbarter100@...> wrote:
We have just taken Nunky on her maiden voyage from Antibes to Almerimar over 5-6 weeks and we have loved the whole experience. The boat just feels so safe. Now that we have some experience of the boat I am hoping to be able to contribute to the group and the knowledge base. One thing about the Western Med that I have noticed however is the amount of motoring you have to do. We have put 130 hours on the engine in just over 800 miles. Nunky currently has the original Perkins M80T fitted. The hour meter broke at some point so I have no idea how many hours it has done. The new meter read 10 when we bought her but I doubt that was fitted 10 hours before we the boat. Anyway we were considering a complete overhaul but a head gasket problem we had in Cartagena suggests that is the least we should do. Given that I have no idea how many hours the Perkins has done I am thinking about replacing it. I have read and reread all the previous posts about repowers and I am edging towards a Beta 75. I like the fact that the engine is simple, they seem to have an excellent reputation and they will also fit a bespoke charging solution. That appeals because when we fit lithium eventually I would like a high capacity 24v alternator fitting. I would really appreciate the group's current views on repowers that have been undertaken. Many thanks -- Mark & Nicky Barter S/V Nunky SM 110
|
|
|
|
Re: Anchor chain counter
Wolfgang Weber <webercardio@...>
Mostly you need a new magnet in the gipsy to count the length on the counter Wolfgang Weber SY Elise Amel 54 /162
|
|
|
|
Re: Electric shock from the windlass
PAOLO CUNEO
Hi Craig,
As soon as I can get back on board I will put your advice to good use and post the result Thank you all Paolo SM 454 Whisper Inviato da iPad
|
|
|
|
Re: Galley refrigerator not cooling
Hi Bill and Paul,
toggle quoted messageShow quoted text
The man who is running Caraibe Refrigeration from the office upstairs is not connected to the downstairs business Caraibe Marine. I can confirm that he is the tall French man who has not received good reviews and is not being recommended by members of this forum. I put out a request this morning on the Martinique Cruisers web and was put in contact with a French man who speaks English with an Aussie accent. His name is Harvey and he is recommended and has all the equipment, he confirmed with me that I probably have too much gas in the small under counter fridge. Coming by later in the week. Thanks for all the advise. Very Best Barry and Penny “SV Lady Penelope II” Amel 54. #16 Sainte Anne anchorage Martinique
On Aug 31, 2020, at 04:19, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:
|
|
|
|
Re: DC DC starter battery charger on Amel 55 fuse sizes
Billy Newport
To conclude this.
I called Cay Electronics, my local Mastervolt dealer/installer. They didn't have the Magic 24/12/20 DCDC charger but recommended a Victron 24/12/25 instead. I mention I have one of those but the wiring @ 10 awg worried me given 15A vs 25A. They indicated 10 awg is fine for 25A, it's a voltage drop problem vs a safety/fire risk. 10 awg at 25A would be between 5 and 10% voltage drop which they think is fine for a charger so they would change the fuses to 15A (24V side) and 25A (12V side). I'll do this and see how it goes.
|
|
|
|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
Many thanks Attika.
Paul Dowd Managing Director UK: +44 (0)7710 466619 skype: pauldowd
This e-mail (including attachments) may contain sensitive and/or confidential information. If received in error, its use by you is not authorised and may be unlawful. Please notify the sender and delete all copies immediately. E-mails may be subject to error, interference and virus and no liability is accepted for loss or damage however it arises and whether direct or indirect.
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Roque
Sent: 31 August 2020 14:50 To: main@amelyachtowners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Paul
If you have the Lewmar chain counter maybe the attached Manual will help.
I think it is quite different from the SM
Chain Corrente counterManual-…
Roque Attika A54 -117 Paraty Brasil
Em seg, 31 de ago de 2020 às 09:25, Paul Dowd and Sharon Brown <paul.dowd@...> escreveu:
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|
|
|
Super Maramu Repower
Mark Barter
We have just taken Nunky on her maiden voyage from Antibes to Almerimar over 5-6 weeks and we have loved the whole experience. The boat just feels so safe. Now that we have some experience of the boat I am hoping to be able to contribute to the group and the knowledge base.
One thing about the Western Med that I have noticed however is the amount of motoring you have to do. We have put 130 hours on the engine in just over 800 miles. Nunky currently has the original Perkins M80T fitted. The hour meter broke at some point so I have no idea how many hours it has done. The new meter read 10 when we bought her but I doubt that was fitted 10 hours before we the boat. Anyway we were considering a complete overhaul but a head gasket problem we had in Cartagena suggests that is the least we should do. Given that I have no idea how many hours the Perkins has done I am thinking about replacing it. I have read and reread all the previous posts about repowers and I am edging towards a Beta 75. I like the fact that the engine is simple, they seem to have an excellent reputation and they will also fit a bespoke charging solution. That appeals because when we fit lithium eventually I would like a high capacity 24v alternator fitting. I would really appreciate the group's current views on repowers that have been undertaken. Many thanks -- Mark & Nicky Barter S/V Nunky SM 110
|
|
|
|
Re: DC DC starter battery charger on Amel 55 fuse sizes
Joerg Esdorn
Looks like you've found the problem, Billy. My understanding is that the Amel 55 initially did not have this DC to DC charger, with the engine alternator being the sole charging source for the starter battery. This resulted in the starter batteries going bad when boats weren't moving for long periods - the specs for the AGM say that the self discharge rate is 3% per month. So you also might have a sulfated starter battery because it has been deep discharged many times and never been charged to 100% by the engine. Good luck with fixing your issue! Cheers Joerg
Joerg Esdorn A55 #53 Kincsem
|
|
|
