Date   
Re: Back up tablet navigation aid

Matt Salatino
 

AquaMaps. It has active captain.
Navionics is also good.

~~~⛵️~~~Matt

On Oct 18, 2019, at 3:35 PM, Rob Hughes via Groups.Io <svluna01@...> wrote:

I just bought a new ios tablet to use as a secondary plotter. What programs are you using?  and what to stay away from. sailing the Bahamas and Caribbean.  

Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon #replacement

eric freedman
 

The unit took me about 2 hours to install. I installed mine in the aft cabin .On 90 degree days it can cool my cabin like a meat locker.
There is larger unit if you think you need more BTU'S, It is the same size. The thermostat is digital and whats really great as it has a phone type cord connecting the sensor on the coil to the thermostat.
Fair Winds,
Eric

On October 18, 2019 at 3:30 PM "Nicolas Klene via Groups.Io" <laixoi@...> wrote:

Hi Eric 
Sorry to come back to you  but the following model is 8000 BTU even if it's called 6K ?
I guess plug & play didn't require adjurent size wize under the sofa ?
By the way i'm not the proud owner of SM 476 ,Steven is ,mine is SM 471!
Sorry Steven
Nick
SV "TO BE NAMED SOON" 
SM471
Dometic model DTU 6k 230 vac 60 hz 410



 

Back up tablet navigation aid

Rob Hughes
 

I just bought a new ios tablet to use as a secondary plotter. What programs are you using?  and what to stay away from. sailing the Bahamas and Caribbean.  

Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon #replacement

Nicolas Klene
 

Hi Eric 
Sorry to come back to you  but the following model is 8000 BTU even if it's called 6K ?
I guess plug & play didn't require adjurent size wize under the sofa ?
By the way i'm not the proud owner of SM 476 ,Steven is ,mine is SM 471!
Sorry Steven
Nick
SV "TO BE NAMED SOON" 
SM471
Dometic model DTU 6k 230 vac 60 hz 410


Re: A54 - bow roller hooks

Annsofie & Jonas Svanberg
 

That looks very complicated.
We have one line, 24-30 mm diameter, with a spliced eye that fits on the center cleet, and then a fixed lengt with a hook in the end. 


Hälsningar
Ann-Sofie Svanberg


Skickat från min iPhone

18 okt. 2019 kl. 16:56 skrev Stefan Schaufert <mail@...>:



Dear Thomas, dear Ameliens,

after 3 weeks on the anchor I have to take back my thoughts for the hooks on the bow roller. The rope (for the anchor chain) is now clearly reduced. The diameter of the hooks are to small. You have to take an extra protection or binding the rope a bit to side.
Any other ideas for the hooks?

Best regards
Stefan
A54-119-Lady Charlyette still in Porto Santo

<AF279451-E317-4037-A114-C4D8243E2B85.jpeg>
<241B2FC3-15E7-43BB-955D-C7CEB69469CE.jpeg>
<7100F356-6404-411D-AD6C-541A7A326E06.jpeg>

Re: Onan MDKD 6.5kW genset exhaust elbow

Paul Dowd and Sharon Brown
 

You can get one from Seapower Marine in the UK for £425 + VAT (20%). http://www.seapowermarine.co.uk

 

I have enquired about getting a discount for ordering several, and also to see if the VAT is not applicable for non-UK residents (which I believe should be the case).

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Karen Smith via Groups.Io
Sent: 18 October 2019 06:02
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Onan MDKD 6.5kW genset exhaust elbow

 

Mark,

From the local Onan dealer we were quoted $1600, still pretty crazy.

The internal geometry of the part is complex, with a partial water jacket, and they are typically investment cast.  There is a shop that will make the molds, but they need a part to cut open so they can measure and duplicate the internal geometry, and it takes a minimum of 8 weeks. If we could find an old one, we'd start that process while ours is still limping along.  

We were lucky--this time--that the salt water spray from the leaking elbow didn't hit anything fragile or important. It could easily have soaked and destroyed our battery charger, or the electrical end of the generator.  We do not consider JBWeld to be anything other than a very short term emergency repair to be made right as soon as possible, however that is done.




--
Cheers
Paul
Ya Fohi - Amel 54 #98

Re: A54 - bow roller hooks

Stefan Schaufert
 

Dear Thomas, dear Ameliens,

after 3 weeks on the anchor I have to take back my thoughts for the hooks on the bow roller. The rope (for the anchor chain) is now clearly reduced. The diameter of the hooks are to small. You have to take an extra protection or binding the rope a bit to side.
Any other ideas for the hooks?

Best regards
Stefan
A54-119-Lady Charlyette still in Porto Santo

Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon #replacement

Nicolas Klene
 

Hello Everybody
I am please to annonce that since this morning , I am the proud owner of the SM n° 476 ! My first ever boat !
It comes with a broken Climma 9EH AC unit in the salon as suspected  by Olivier during the survey ! 
It might only be the compressor, but a technicien suggested to change it all.
I will look into the Webasto unit 
Bill I wished you lived in the south of France, I have sooo much to lurn  !
Nick
SM.476

Re: Onan MDKD 6.5kW genset exhaust elbow

Miles
 

Keran, Mark,

 

If anyone winds up having a genset exhaust elbow made,  I would like to have one also.  Maybe added numbers will reduce the unit cost. 

 

Miles Bidwell

 

s/y Ladybug, sm216 Newport, RI  soon leaving for Martinique

Re: Onan MDKD 6.5kW genset exhaust elbow

Karen Smith
 

Mark,

From the local Onan dealer we were quoted $1600, still pretty crazy.

The internal geometry of the part is complex, with a partial water jacket, and they are typically investment cast.  There is a shop that will make the molds, but they need a part to cut open so they can measure and duplicate the internal geometry, and it takes a minimum of 8 weeks. If we could find an old one, we'd start that process while ours is still limping along.  

We were lucky--this time--that the salt water spray from the leaking elbow didn't hit anything fragile or important. It could easily have soaked and destroyed our battery charger, or the electrical end of the generator.  We do not consider JBWeld to be anything other than a very short term emergency repair to be made right as soon as possible, however that is done.




Re: Onan MDKD 6.5kW genset exhaust elbow

Mark McGovern
 

Orion,

The exhaust elbow is a relatively complex geometry that also fits into a fairly tight space.  While I am sure replicating it from measurements and sketches alone could be done, the chances of getting something wrong would be pretty high.  Here is a picture of one for reference:  https://amelyachtowners.groups.io/g/main/photo/84403/13?p=Name,,onan,20,1,0,0  

--
Mark McGovern
SM #440 Cara
Deale, MD USA

Re: Companion way for removal

INUS - BUSCH
 

Ian and Judy,
beewax seems to fit good for natural wood, thanks for that.
All the best.
Dieter
Fal-lera Sharki #135

Von meinem iPhone gesendet

Am 16.10.2019 um 19:01 schrieb ianjenkins1946 <ianjudyjenkins@...> <ianjudyjenkins@...>:

Ian and Judy

Re: Onan MDKD 6.5kW genset exhaust elbow

Orion Martin
 

Hi Karen,

 Is it possible to temporarily remove it and measure for dimensions? 

Re: mizzen traveller

Paul Osterberg
 

Thank you Mark
Paul

Re: Onan MDKD 6.5kW genset exhaust elbow

Mark McGovern
 

Karen,

I just looked up the price for a replacement for this part.  US$2,269 is absolutely insane!  I could make them out of 316 Stainless Steel for way less than that.  I have to remove mine this winter for cleaning so I may just design a replacement and put a few extra on the shelf. Unfortunately, that will too late to help you guys out.

--
Mark McGovern
SM #440 Cara
Deale, MD USA

Re: mizzen traveller

Mark McGovern
 

Paul,

The track is Lewmar Size 1.  It would appear that Bill used:

1 x Size 1 End Stop With Single CL Sheave (Lewmar Part # 29471031BK): https://www.lewmar.com/node/13230?v=26088

1 x Size 1 End Stop With Double CL Sheaves (Lewmar Part # 29471032BK):  https://www.lewmar.com/node/13230?v=26089

I am sure Bill will eventually see this post and confirm or correct or you can contact him via email directly at GreatKetch "at" yahoo.com.

--
Mark McGovern
SM #440 Cara
Deale, MD USA

Re: mizzen traveller

Paul Osterberg
 

I have looked at the set up Harmonie did, and might make similar, but I can,t see what make the track is for ordering control block. 
Currently I use a preventer to control the shape and position of the sail, but improvement is needed
Paul

Re: New Genoa sail for Amel 54 and SM

Paul Osterberg
 

talked with incidnce sail again, and no problem they will do the foam luff. On my current sail I had no foam luff, but had a rope sewed in and that improved the shape a lot on the genoa when furled. The sailmaker who sewed in the rope said that if one rope was not enough, one could sew in a shorter rope parallel to the first one. Understand that this is old school but it definitely made a big difference.
Paul SY Kerpa SM 259, Lagos

Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon #replacement

Ian Townsend
 

We installed a Webasto 10,000 BTU unit. Note that most other manufacturers do not outwardly state their units are dual cycle (so they don't have to replace parts under warranty). Webasto does. They also have a wide support network and are less expensive. 


Ian & Margaret
S/V Loca Lola II 
SM153
US East Coast

On Oct 17, 2019, at 5:05 AM, eric freedman <kimberlite@...> wrote:

Hi Bob,

Sorry it is 8k BTU. It works too well.

Dometic model DTU 6k 230 vac 60 hz 410  IT WORKS ON 50 AND 60 hz.

SXM digital display and cxp control cable.

total cost a few years ago was about 2500-.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Bob Ross via Groups.Io
Sent: Wednesday, October 16, 2019 10:35 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] SM2K: Replacing a CLIMMA 9EH AC unit in the Salon #replacement #replacement

 

Hi Eric,
Thanks for the lead on an almost “plug and play”  idea with Dometic 10.
Can you share some model details?
model number, power, supplier, etc.
Much appreciated
Bob
Nomad Amel Super Maramu #362
Trinidad

Re: mizzen traveller

ngtnewington Newington
 

I have found that one can control the mizzen boom by centring it on the track and using a bang/preventer tackle to the  chain plate either side of the coach roof. So upon tacking or gybing one simply swaps the tackle from one side to the other.
Nick 
Amelia AML 54-019
Kefalonia


On 16 Oct 2019, at 18:18, Paul Osterberg <osterberg.paul.l@...> wrote:

Hello!
I'm planning to arrange so that I can control the Mizzen traveller from the cockpit. does anyone now who have made the track? I need to add end "stop" with sheaves. all advice highly appreciated. such as a source for end "stop"

Paul on S/Y Kerpa SM#259 Lagos Portugal