1. main@AmelYachtOwners.groups.io
   Date   
Re: ZOOM Meeting of Members #ZOOM #poll

Justin Paulsen
 

I would like to attend as well.  I already submitted my poll answers.

Thank you,

Justin
Hopeful future SM/SM2k owner


On Mon, Apr 20, 2020 at 8:36 AM CW Bill Rouse <brouse@...> wrote:
As of the date/time of this email, added the following:
s/v Sangaris <sangaris@...>
Peter Tiner <peter.tiner@...>
Ofer Magen <ofermagen@...>
Wolfgang Weber <webercardio@...>
Elja Röllinghoff <Bijorka@...>
Micky Ball <mik-ball@...>
Alan Leslie <s.v.elyse@...>
Mohammad Shirloo <mshirloo@...>
Bret Cameron <brentcameron61@...>
--
 
Best,
 
CW Bill Rouse
Amel Owners Yacht School
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



--
Justin Paulsen
IT Professional

"The world is open, are you?"
Re: ZOOM Meeting of Members #ZOOM #poll

CW Bill Rouse
 

As of the date/time of this email, added the following:
s/v Sangaris <sangaris@...>
Peter Tiner <peter.tiner@...>
Ofer Magen <ofermagen@...>
Wolfgang Weber <webercardio@...>
Elja Röllinghoff <Bijorka@...>
Micky Ball <mik-ball@...>
Alan Leslie <s.v.elyse@...>
Mohammad Shirloo <mshirloo@...>
Bret Cameron <brentcameron61@...>
--
 
Best,
 
CW Bill Rouse
Amel Owners Yacht School
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
Re: ZOOM Meeting of Members #ZOOM #poll

Brent Cameron
 

Bill, please add me. Thanks. 

Brent Cameron, Future Amel owner & Amel Owner's Registry Moderator

On Apr 20, 2020, 9:21 AM -0400, CW Bill Rouse <brouse@...>, wrote:
I added the following to the list:
Elja Röllinghoff <Bijorka@...>
Micky Ball <mik-ball@...>
Alan Leslie <s.v.elyse@...>

The scheduled time is 2000 hours GMT 25 April 2020, which is  0800 26 April 2020...Use the chart below for the time in your time zone
Country GMT +/- Scheduled Time Scheduled Date
UK (GMT) 0 2000 4/25/2020
NZ 1200 800 4/26/2020
AU Queensland 1000 600 4/26/2020
Tahiti -1000 1000 4/25/2020
USA West -700 1300 4/25/2020
USA East -400 1600 4/25/2020
USA Central -600 1400 4/25/2020
Martinique -400 1600 4/25/2020
Germany 200 2200 4/25/2020
Central European Summer Time 200 2200 4/25/2020
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Mon, Apr 20, 2020 at 7:18 AM greg greg <41greg.marine@...> wrote:
hi, Bill, add an option to discuss ideas about summer navigation perspectives in different regions...


--
Brent Cameron

Future Amel Owner & Amel Owner Registry Moderator

Oro-Medonte, Ontario, Canada
Re: ZOOM Meeting of Members #ZOOM #poll

CW Bill Rouse
 

I added the following to the list:
Elja Röllinghoff <Bijorka@...>
Micky Ball <mik-ball@...>
Alan Leslie <s.v.elyse@...>

The scheduled time is 2000 hours GMT 25 April 2020, which is  0800 26 April 2020...Use the chart below for the time in your time zone
Country GMT +/- Scheduled Time Scheduled Date
UK (GMT) 0 2000 4/25/2020
NZ 1200 800 4/26/2020
AU Queensland 1000 600 4/26/2020
Tahiti -1000 1000 4/25/2020
USA West -700 1300 4/25/2020
USA East -400 1600 4/25/2020
USA Central -600 1400 4/25/2020
Martinique -400 1600 4/25/2020
Germany 200 2200 4/25/2020
Central European Summer Time 200 2200 4/25/2020
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Mon, Apr 20, 2020 at 7:18 AM greg greg <41greg.marine@...> wrote:
hi, Bill, add an option to discuss ideas about summer navigation perspectives in different regions...

Re: 𝗭𝗢𝗢𝗠 𝗴𝗲𝘁 𝘁𝗼𝗴𝗲𝘁𝗵𝗲𝗿

Wolfgang Weber
 

Hello Bill,
I would like to join the meeting. Thank you
Wolfgang Weber SY Elise Amel 54 # 162 
Re: ZOOM Meeting of Members #ZOOM #poll

greg greg
 

hi, Bill, add an option to discuss ideas about summer navigation perspectives in different regions...
Re: 𝗭𝗢𝗢𝗠 𝗴𝗲𝘁 𝘁𝗼𝗴𝗲𝘁𝗵𝗲𝗿

ofer magen
 

Hi Bill,
I will be happy to join.
Thanks,

Ofer Magen
SV Alba 54#160
Cyprus
Re: ZOOM Meeting of Members #ZOOM #poll

Micky Ball
 

Thanks Bill Please count me in 
Re: ZOOM Meeting of Members #ZOOM #poll

Elja Röllinghoff Balu SM 222
 

Oh im am curious for saturday
Where we get the meeting nr ?

Best Elja
SM 222

Von meinem iPhone gesendet
Re: ZOOM Meeting of Members #ZOOM #poll

Alan Leslie
 
Edited

Thanks Bill,

I'm keen....
Cheers

Alan
Elyse SM437
Re: Windlass/Genoa Furler electrical problem, circuit breaker bad?

Alan Leslie
 

Hi Tom,

i sourced them from SAV at Amel.fr

Maud, in other words....

Cheers
Alan
Elyse SM437
Re: ZOOM Meeting of Members #ZOOM #poll

Alexander Schenk
 

Hello,

Happy to participate.

My main question is how to order spare parts from Amel.

Best
Alexander

SY Antinea
SM #231


On 20 Apr 2020, at 00:59, CW Bill Rouse <brouse@...> wrote:



A new poll has been created:

We would like to ask you which Topics you prefer to be discussed during the ZOOM meeting and if you are OK with the Tentative Schedule.

The following is the Tentative Schedule for the ZOOM meeting. By selecting GMT at 2000 hours, we can include members worldwide.:

Country GMT +/- Sched Time Sched Date
UK (GMT) 0 2000 4/25/2020
NZ 1200 800 4/26/2020
AU Queensland 1000 600 4/26/2020
Tahiti -1000 1000 4/25/2020
USA West -700 1300 4/25/2020
USA East -400 1600 4/25/2020
USA Central -600 1400 4/25/2020
Martinique -400 1600 4/25/2020
Germany 200 2200 4/25/2020
Central EU Summer Time 200 2200 4/25/2020

You can select multiple answers.

We plan a 30-minute ZOOM meeting with 15 minutes to discuss each of 2 Topics. We currently have 35 members that have expressed the wish to participate. I have a list of those members and will send an email to you today.

1. I am OK with the Tentative Schedule
2. Sourcing parts
3. SM & SN furler maintenance (Genoa & Main)
4. Hard Dodger plexiglass replacement
5. Galley Upgrades
6. Standing Rigging
7. Navigation Equipment Upgrades from B&G Hydra and B&G 3000

Vote Now

Do not reply to this message to vote in the poll. You can vote in polls only through the group's website.
Re: 𝗭𝗢𝗢𝗠 𝗴𝗲𝘁 𝘁𝗼𝗴𝗲𝘁𝗵𝗲𝗿

Peter Tiner
 

Hi

Sounds li9ke a great idea.

Yes, i´m interested in participating.

Regards

\Peter SY Maiken A54 #52
Re: ZOOM Meeting of Members #ZOOM #poll

Mohammad Shirloo
 

Hi Bill;

Counts us in. The timing is fine for us. Topics  2,4,7.  Fun to talk boats when so far away. Thanks for setting this up.

Mohammad and Aty
B&B Kokomo 
A54 #099

On Apr 19, 2020, at 3:59 PM, CW Bill Rouse via groups.io <brouse@...> wrote:



A new poll has been created:

We would like to ask you which Topics you prefer to be discussed during the ZOOM meeting and if you are OK with the Tentative Schedule.

The following is the Tentative Schedule for the ZOOM meeting. By selecting GMT at 2000 hours, we can include members worldwide.:

Country GMT +/- Sched Time Sched Date
UK (GMT) 0 2000 4/25/2020
NZ 1200 800 4/26/2020
AU Queensland 1000 600 4/26/2020
Tahiti -1000 1000 4/25/2020
USA West -700 1300 4/25/2020
USA East -400 1600 4/25/2020
USA Central -600 1400 4/25/2020
Martinique -400 1600 4/25/2020
Germany 200 2200 4/25/2020
Central EU Summer Time 200 2200 4/25/2020

You can select multiple answers.

We plan a 30-minute ZOOM meeting with 15 minutes to discuss each of 2 Topics. We currently have 35 members that have expressed the wish to participate. I have a list of those members and will send an email to you today.

1. I am OK with the Tentative Schedule
2. Sourcing parts
3. SM & SN furler maintenance (Genoa & Main)
4. Hard Dodger plexiglass replacement
5. Galley Upgrades
6. Standing Rigging
7. Navigation Equipment Upgrades from B&G Hydra and B&G 3000

Vote Now

Do not reply to this message to vote in the poll. You can vote in polls only through the group's website.
Re: Excessive usage of water maker membranes

Craig Briggs
 

Right, Alan - an often misunderstood point. You can indeed use your watermaker in fresh water (or brackish) perfectly safely - but not at the full pressure you use for salt water. Just do not exceed the flow rate of the membrane - slowly bring up the pressure until you get full flow and stop. 
Cheers, Craig
Re: Windlass/Genoa Furler electrical problem, circuit breaker bad?

eric freedman
 

Hi Tom,

I got mine from Maud.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Thomas Kleman
Sent: Sunday, April 19, 2020 7:10 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Windlass/Genoa Furler electrical problem, circuit breaker bad?

 

Alan- would you be good enough to tell me where you got the Genoa furling solenoid spares ? Thx

Tom and Kirstin
SV L'ORIENT
SM2K 422
3 days left of quarantine in Oahu

Re: Cleaning the prop

eric freedman
 

I usually use dilute hydrochloric acid on my prop. If comes out quite clean.

Be careful not to inhale the fumes.
Many spots need repeated acid washing until there is nothing left to remove.
On some spots that are large , when the acid stops foaming it is time for
new acid.

I then use fine emery paper and my prop always comes out like new.
I do this every 2 years when I haul to change the prop seals.

Fair Winds
Eric
Amel Super Maramu #376

-----Original Message-----
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io]
On Behalf Of Mark Erdos
Sent: Sunday, April 19, 2020 11:33 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Cleaning the prop

Alexander,

Take the prop to a place that has a soda blaster. It'll cost a minimal
amount and can be done while you wait.


With best regards,

Mark

Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us

-----Original Message-----
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io]
On Behalf Of Alexander Schenk via groups.io
Sent: Sunday, April 19, 2020 11:51 AM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] Cleaning the prop

Covid- project - getting replacement prop to shine again...

Using grandmothers old recipe (toothpaste) and it takes its time... any
better ideas around?

Best
Alexander

SY Antinea
SM #231
Re: Excessive usage of water maker membranes

eric freedman
 

Hi Tom,

Have you heard when they are lifting the quarantine on puerti Rico?

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Thomas Peacock
Sent: Sunday, April 19, 2020 12:13 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Excessive usage of water maker membranes

 

My only thought is like others, make certain that there is no chlorine. Obviously, there shouldn’t be if all you do is make RO water. Do you ever put water in the tank from the marina? We often have both RO and shore water, tough to tell how much chlorine, although you can buy test strips. I will sometimes flush with a couple of gallons of RO water drawn from the control panel tap, rather than flush with water from the tank.

 

 

This details some of what can go wrong, including post-mortem pictures. Interestingly, there are several causes for physical damage to the membranes (as opposed to chemical) that might have some bearing on your issue.

 

Tom Peacock

SM 240 Aletes, San Juan PR

Waiting to fly back down to PR next month

 

On Apr 18, 2020, at 8:21 PM, Mark Erdos <mcerdos@...> wrote:

 

I need a little help with water maker usage and maintenance, please.

 

Cream Puff has a 24v D60 water-maker. My problem is we seem to be going through membranes at the rate of a pair a year. I have read where others have used the same set of membranes for years and still get drinkable water. This is not the case with us. We are in our 5th year of full time cruising and are now on our 6th set of membranes.

 

When I last change membranes in Colombia, this was about March 2019. Our current membranes are just over a year old. The PPMs are starting to creep up a bit now and we have gone from the 300 range to the 500 range. We notice a change in drinking quality over 600 PPMs. This is when we usually change the membranes.

 

We run the water-maker at least once a week when in a marina, flush it with the fresh water rinse. I have a double charcoal filter set up for the tank rinse. When on anchor it is run just about every day. I am careful to watch the pressure and water making float gauge. I normally set it at 55 liters per hour and this put the pressure in lower side of the green range.

 

Any ideas why our membranes are not lasting or why our PPMs creep up?

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

 
Re: Windlass/Genoa Furler electrical problem, circuit breaker bad?

Thomas Kleman
 

Alan- would you be good enough to tell me where you got the Genoa furling solenoid spares ? Thx

Tom and Kirstin
SV L'ORIENT
SM2K 422
3 days left of quarantine in Oahu
ZOOM Meeting of Members #ZOOM #poll

CW Bill Rouse
 
Edited

We would like to ask you which Topics you prefer to be discussed during the ZOOM meeting and if you are OK with the Tentative Schedule.

The following is the Tentative Schedule for the ZOOM meeting. By selecting GMT at 2000 hours, we can include members worldwide:

Country GMT +/- Scheduled Time Scheduled Date
(GMT) 0 2000 4/25/2020
UK Summer Time 100 2100 4/25/2020
NZ 1200 800 4/26/2020
AU Queensland 1000 600 4/26/2020
Tahiti -1000 1000 4/25/2020
USA West -700 1300 4/25/2020
USA East -400 1600 4/25/2020
USA Central -600 1400 4/25/2020
Martinique -400 1600 4/25/2020
Germany 200 2200 4/25/2020
Central EU Summer Time 200 2200 4/25/2020
Note: The above was checked with: https://greenwichmeantime.com/time-gadgets/time-zone-converter/
You can select multiple answers.

We plan a 30-minute ZOOM meeting with 15 minutes to discuss each of 2 Topics. We currently have 35 members that have expressed the wish to participate. I have a list of those members and will send an email to you today.

Results

See Who Responded

5221 - 5240 of 56726