Date   

Re: [Amel Yacht Owners] Re: Story on Super Maramu in Portobelo Panama

Robin Cooter <robincooter@...>
 

He must have stolen the boat. He couldn't be a real AMEL owner. Could he?

Robin

Santorin "Belouga"

edmund_steele <edmundsteele@earthlink.net> wrote:
Well, I noticed immediately that his outhauls are too slack.
Ed
SM "DoodleBug"

--- In amelyachtowners@yahoogroups.com, "closereach" <closereach@...>
wrote:

I don't know if this fact or fiction but it is an interesting web
post:

http://sv-timemachine.net/?p=234

Richard
SM "Spice"





---------------------------------
Yahoo! Answers - Got a question? Someone out there knows the answer. Tryit now.


Eastern Med and Suez transit

John and Anne on Bali Hai <annejohn@...>
 

Hi Ed,
No idea where you are but we are in Malta. We have an excellent log
produced by Kamu 2, a 12.9mtr yacht giving important info on charges,
reception etc. in Northern Cyprus,Syria,Lebanon, Israel and Egypt,
transiting the canal etc.Not sure whether to send it to you at your
Email address or put it in the Files section. Suffice to say that we
are encouraged to go that way for our summer cruise. If you want it
sent to you please let us know your address as I am not sure whether
the bit shown on your place in the members section would work.
Alternatively if others also want the info I will try to post it in the
files section. It is two years worth (2005/6) and each one is covers
seven or eight pages.
My full address is in the members section.
Let me know, Best wishes John SM319


Docking Plan for Super Maramu

Ag Av8ter
 

Hello all,

Last time we hauled out I must have left the docking diagram with the
travel lift operator. We are in Antigua and are due to haul out at
Jolly Harbour this coming Saturday.

Our boat is SM#266 and has the forward looking sonar. Does anyone have
the docking diagram they can send to me as a PDF file?? I would sure
appreciate it.

Also, Has anyone not used the slings and used the liftinf eyes on the
chainplates?

Please send the PDF file to: agav8ter@yahoo.com

Thank you in advance for your help,

Tony Gray
WORLD CITIZEN
SM #266


Suez Canal transit

edmund_steele
 

We are headed for a canal transit in early August, 2007. Does anyone
who has already transited the Suez canal, have any information on the
measurements of and fees for a Super Maramu?
Ed
SM #331 DoodleBug


Re: [Amel Yacht Owners] Purchase 1996 SM

peter pappas <pjppappas@...>
 

you can search this site for faux teak, i believe the best option is to repaint. PJP

David Elliott <elliottyachts@yahoo.com.sg> wrote: Thanks Peter I will check that out.

Any internal upgrading required?

Also on thing I'm considering is either renewing the decks or laying real teak, have you heard of anybody this?

David

peter pappas <pjppappas@yahoo.com> wrote:
The switches on my windlass failed and I replaced them with deck mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico.

David Elliott <elliottyachts@yahoo.com.sg> wrote: I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat.

David

---------------------------------

Real people. Real questions. Real answers. Share what you know.



---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.



---------------------------------
Yahoo! Movies - Search movie info and celeb profiles and photos.








---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.


MANGO RIGGING

George Volos
 

Dear friends,
Does anyone have a rigging diagram for a Mango they would be willing to
share?
Thank you


Re: [Amel Yacht Owners] Purchase 1996 SM

elliottyachts <elliottyachts@...>
 

Thanks Peter I will check that out.

Any internal upgrading required?

Also one thing I'm considering is either renewing the decks or
laying real teak, have you heard of anybody this?

David


--- In amelyachtowners@yahoogroups.com, peter pappas <pjppappas@...>
wrote:

The switches on my windlass failed and I replaced them with deck
mounted swithches which I like a lot better. Peter Pappas "Callisto"
#369, Vallarta, Mexico.

David Elliott <elliottyachts@...> wrote: I'm currently
looking at purchasing a 1996 SM and would like to hear from owners
on what to lookout for and what will most likley, or should, be
updated on this boat.

David

---------------------------------

Real people. Real questions. Real answers. Share what you know.

[Non-text portions of this message have been removed]






---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.

[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Purchase 1996 SM

David Elliott <elliottyachts@...>
 

Thanks Peter I will check that out.

Any internal upgrading required?

Also on thing I'm considering is either renewing the decks or laying real teak, have you heard of anybody this?

David

peter pappas <pjppappas@yahoo.com> wrote:
The switches on my windlass failed and I replaced them with deck mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico.

David Elliott <elliottyachts@yahoo.com.sg> wrote: I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat.

David

---------------------------------

Real people. Real questions. Real answers. Share what you know.



---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.








---------------------------------
Yahoo! Movies - Search movie info and celeb profiles and photos.


Re: [Amel Yacht Owners] Purchase 1996 SM

peter pappas <pjppappas@...>
 

The switches on my windlass failed and I replaced them with deck mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico.

David Elliott <elliottyachts@yahoo.com.sg> wrote: I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat.

David

---------------------------------

Real people. Real questions. Real answers. Share what you know.








---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.


Re: Story on Super Maramu in Portobelo Panama

edmund_steele
 

Well, I noticed immediately that his outhauls are too slack.
Ed
SM "DoodleBug"

--- In amelyachtowners@yahoogroups.com, "closereach" <closereach@...>
wrote:

I don't know if this fact or fiction but it is an interesting web
post:

http://sv-timemachine.net/?p=234

Richard
SM "Spice"


Story on Super Maramu in Portobelo Panama

Zanareva
 

I don't know if this fact or fiction but it is an interesting web post:

http://sv-timemachine.net/?p=234

Richard
SM "Spice"


Re: Pressure sensitive velcro

airbus4russ <russ.roberts.va@...>
 

John,

Have you considered, or has anyone else tried, the 3M brand of "Command
Adhesive" picture hangers? They are guaranteed to not leave marks when
removed and require no drilling. I've enclosed a link to picture of
the box from an Amazon ad: [http://www.amazon.com/3M-Sawtooth-Picture-
Hanger/dp/B0001DTL2O]

I'm interested to see what others have to say about the Velcro.

Regards,

Russ

--- In amelyachtowners@yahoogroups.com, johnabo2003 <no_reply@...>
wrote:

I plan to attach some paintings to the mahogany bulkhead using
acrylic
backed 2" self adhesive velcro. Has anybody had any problems with the
acrylic glue marking the high gloss finish on the mahogany when using
this technique?

Regards
John SM394


Pressure sensitive velro

johnabo2003 <no_reply@...>
 

I plan to attach some paintings to the mahogany bulkhead using acrylic
backed 2" self adhesive velcro. Has anybody had any problems with the
acrylic glue marking the high gloss finish on the mahogany when using
this technique?

Regards
John SM394


Purchase 1996 SM

David Elliott <elliottyachts@...>
 

I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat.

David


---------------------------------

Real people. Real questions. Real answers. Share what you know.


Algea-X

hns154es <hns154@...>
 

Hello Gary

Yes, we are still pleased with the Algea-X. Much less black smoke on
the side of the hull and never a problem with the diesel.

Best regards
Hanspeter Wehrli

SM #158 in Tahiti


Re: [Amel Yacht Owners] Electric Motor for outhaul

Dimitris Krassopoulos <dkra@...>
 

Thanks, I will try tommorow morning.

Regards

Dimitris
Sm2000 Alma Libre

_____

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of eric
Sent: Sunday, April 15, 2007 7:32 PM
To: amelyachtowners@yahoogroups.com
Subject: [Amel Yacht Owners] Electric Motor for outhaul



Dimitris,

It is easy to remove the vertical shaft from the outhaul.

1 Remove the screw from the arm that goes into the Anderson winch on the
boom outhaul line.

2 Remove the nut and washers from the bottom of the outhaul motor shaft.

3 The only thing that is now holding the shaft in place is the rust on the
shaft and a key, which sits into a keyway in

the gearbox.

4 Use a very long STEEL, not stainless, bolt screw it into the bottom of the
motor shaft.

5 Use a very heavy hammer and drive the shaft up and out of the gearbox.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite

_____

From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
[mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com] On Behalf Of Dimitris Krassopoulos
Sent: Sunday, April 15, 2007 4:00 AM
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul

Eric,
Exactly the outhaul motor

Dimitris

_____

From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
[mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com] On Behalf Of eric
Sent: Sunday, April 15, 2007 4:22 AM
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul

Dimitris,

Are you talking about the outhaul motor on the boom?

If so I can give you directions.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite

'

_____

From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
[mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com] On Behalf Of Dimitris Krassopoulos
Sent: Saturday, April 14, 2007 2:54 PM
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Subject: [Amel Yacht Owners] Electric Motor for outhaul

Has any one experience of removing the electric motor from the boom? Mine
has sheared of the screws and I have to try to fix it in a shop. My main
problem is how to remove the shaft from the motor to take it away from the
boat. I have removed the wire from inside the boat according to an advise
from amel but they didn't mention how to remove the vertical shaft from the
gear.

SM 2000
Alma Libre

<http://geo.yahoo.
<http://geo.yahoo.
<http://geo.yahoo.
<http://geo.yahoo.
<http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>


Electric Motor for outhaul

eric freedman
 

Dimitris,

It is easy to remove the vertical shaft from the outhaul.

1 Remove the screw from the arm that goes into the Anderson winch on the
boom outhaul line.

2 Remove the nut and washers from the bottom of the outhaul motor shaft.

3 The only thing that is now holding the shaft in place is the rust on the
shaft and a key, which sits into a keyway in

the gearbox.

4 Use a very long STEEL, not stainless, bolt screw it into the bottom of the
motor shaft.

5 Use a very heavy hammer and drive the shaft up and out of the gearbox.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite







_____

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of Dimitris Krassopoulos
Sent: Sunday, April 15, 2007 4:00 AM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul



Eric,
Exactly the outhaul motor

Dimitris

_____

From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
[mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com] On Behalf Of eric
Sent: Sunday, April 15, 2007 4:22 AM
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul

Dimitris,

Are you talking about the outhaul motor on the boom?

If so I can give you directions.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite

'

_____

From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
[mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com] On Behalf Of Dimitris Krassopoulos
Sent: Saturday, April 14, 2007 2:54 PM
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Subject: [Amel Yacht Owners] Electric Motor for outhaul

Has any one experience of removing the electric motor from the boom? Mine
has sheared of the screws and I have to try to fix it in a shop. My main
problem is how to remove the shaft from the motor to take it away from the
boat. I have removed the wire from inside the boat according to an advise
from amel but they didn't mention how to remove the vertical shaft from the
gear.

SM 2000
Alma Libre

<http://geo.yahoo.
<http://geo.yahoo.
<http://geo.yahoo.
<http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>


Re: [Amel Yacht Owners] Electric Motor for outhaul

Dimitris Krassopoulos <dkra@...>
 

Eric,
Exactly the outhaul motor

Dimitris

_____

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of eric
Sent: Sunday, April 15, 2007 4:22 AM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul



Dimitris,

Are you talking about the outhaul motor on the boom?

If so I can give you directions.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite

'

_____

From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
[mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com] On Behalf Of Dimitris Krassopoulos
Sent: Saturday, April 14, 2007 2:54 PM
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Subject: [Amel Yacht Owners] Electric Motor for outhaul

Has any one experience of removing the electric motor from the boom? Mine
has sheared of the screws and I have to try to fix it in a shop. My main
problem is how to remove the shaft from the motor to take it away from the
boat. I have removed the wire from inside the boat according to an advise
from amel but they didn't mention how to remove the vertical shaft from the
gear.

SM 2000
Alma Libre

<http://geo.yahoo.
<http://geo.yahoo.
<http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>


Re: [Amel Yacht Owners] Electric Motor for outhaul

eric freedman
 

Dimitris,

Are you talking about the outhaul motor on the boom?

If so I can give you directions.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite

'



_____

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of Dimitris Krassopoulos
Sent: Saturday, April 14, 2007 2:54 PM
To: amelyachtowners@yahoogroups.com
Subject: [Amel Yacht Owners] Electric Motor for outhaul



Has any one experience of removing the electric motor from the boom? Mine
has sheared of the screws and I have to try to fix it in a shop. My main
problem is how to remove the shaft from the motor to take it away from the
boat. I have removed the wire from inside the boat according to an advise
from amel but they didn't mention how to remove the vertical shaft from the
gear.


SM 2000
Alma Libre

<http://geo.yahoo.
<http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>


Electric Motor for outhaul

Dimitris Krassopoulos <dkra@...>
 

Has any one experience of removing the electric motor from the boom? Mine
has sheared of the screws and I have to try to fix it in a shop. My main
problem is how to remove the shaft from the motor to take it away from the
boat. I have removed the wire from inside the boat according to an advise
from amel but they didn't mention how to remove the vertical shaft from the
gear.

Dimitris
SM 2000
Alma Libre


<http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId
=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>