|
Suez Canal transit
edmund_steele
We are headed for a canal transit in early August, 2007. Does anyone
who has already transited the Suez canal, have any information on the measurements of and fees for a Super Maramu? Ed SM #331 DoodleBug
|
|
|
|
Re: [Amel Yacht Owners] Purchase 1996 SM
peter pappas <pjppappas@...>
you can search this site for faux teak, i believe the best option is to repaint. PJP
David Elliott <elliottyachts@yahoo.com.sg> wrote: Thanks Peter I will check that out. Any internal upgrading required? Also on thing I'm considering is either renewing the decks or laying real teak, have you heard of anybody this? David peter pappas <pjppappas@yahoo.com> wrote: The switches on my windlass failed and I replaced them with deck mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico. David Elliott <elliottyachts@yahoo.com.sg> wrote: I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat. David --------------------------------- Real people. Real questions. Real answers. Share what you know. --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos. --------------------------------- Yahoo! Movies - Search movie info and celeb profiles and photos. --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos.
|
|
|
|
MANGO RIGGING
George Volos
Dear friends,
Does anyone have a rigging diagram for a Mango they would be willing to share? Thank you
|
|
|
|
Re: [Amel Yacht Owners] Purchase 1996 SM
elliottyachts <elliottyachts@...>
Thanks Peter I will check that out.
Any internal upgrading required? Also one thing I'm considering is either renewing the decks or laying real teak, have you heard of anybody this? David --- In amelyachtowners@yahoogroups.com, peter pappas <pjppappas@...> wrote: mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico. looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat.
|
|
|
|
Re: [Amel Yacht Owners] Purchase 1996 SM
David Elliott <elliottyachts@...>
Thanks Peter I will check that out.
Any internal upgrading required? Also on thing I'm considering is either renewing the decks or laying real teak, have you heard of anybody this? David peter pappas <pjppappas@yahoo.com> wrote: The switches on my windlass failed and I replaced them with deck mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico. David Elliott <elliottyachts@yahoo.com.sg> wrote: I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat. David --------------------------------- Real people. Real questions. Real answers. Share what you know. --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos. --------------------------------- Yahoo! Movies - Search movie info and celeb profiles and photos.
|
|
|
|
Re: [Amel Yacht Owners] Purchase 1996 SM
peter pappas <pjppappas@...>
The switches on my windlass failed and I replaced them with deck mounted swithches which I like a lot better. Peter Pappas "Callisto" #369, Vallarta, Mexico.
David Elliott <elliottyachts@yahoo.com.sg> wrote: I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat. David --------------------------------- Real people. Real questions. Real answers. Share what you know. --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos.
|
|
|
|
Re: Story on Super Maramu in Portobelo Panama
edmund_steele
Well, I noticed immediately that his outhauls are too slack.
Ed SM "DoodleBug" --- In amelyachtowners@yahoogroups.com, "closereach" <closereach@...> wrote: post:
|
|
|
|
Story on Super Maramu in Portobelo Panama
I don't know if this fact or fiction but it is an interesting web post:
http://sv-timemachine.net/?p=234 Richard SM "Spice"
|
|
|
|
Re: Pressure sensitive velcro
airbus4russ <russ.roberts.va@...>
John,
Have you considered, or has anyone else tried, the 3M brand of "Command Adhesive" picture hangers? They are guaranteed to not leave marks when removed and require no drilling. I've enclosed a link to picture of the box from an Amazon ad: [http://www.amazon.com/3M-Sawtooth-Picture- Hanger/dp/B0001DTL2O] I'm interested to see what others have to say about the Velcro. Regards, Russ --- In amelyachtowners@yahoogroups.com, johnabo2003 <no_reply@...> wrote: acrylic backed 2" self adhesive velcro. Has anybody had any problems with the
|
|
|
|
Pressure sensitive velro
johnabo2003 <no_reply@...>
I plan to attach some paintings to the mahogany bulkhead using acrylic
backed 2" self adhesive velcro. Has anybody had any problems with the acrylic glue marking the high gloss finish on the mahogany when using this technique? Regards John SM394
|
|
|
|
Purchase 1996 SM
David Elliott <elliottyachts@...>
I'm currently looking at purchasing a 1996 SM and would like to hear from owners on what to lookout for and what will most likley, or should, be updated on this boat.
David --------------------------------- Real people. Real questions. Real answers. Share what you know.
|
|
|
|
Algea-X
hns154es <hns154@...>
Hello Gary
Yes, we are still pleased with the Algea-X. Much less black smoke on the side of the hull and never a problem with the diesel. Best regards Hanspeter Wehrli SM #158 in Tahiti
|
|
|
|
Re: [Amel Yacht Owners] Electric Motor for outhaul
Dimitris Krassopoulos <dkra@...>
Thanks, I will try tommorow morning.
Regards Dimitris Sm2000 Alma Libre _____ From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] On Behalf Of eric Sent: Sunday, April 15, 2007 7:32 PM To: amelyachtowners@yahoogroups.com Subject: [Amel Yacht Owners] Electric Motor for outhaul Dimitris, It is easy to remove the vertical shaft from the outhaul. 1 Remove the screw from the arm that goes into the Anderson winch on the boom outhaul line. 2 Remove the nut and washers from the bottom of the outhaul motor shaft. 3 The only thing that is now holding the shaft in place is the rust on the shaft and a key, which sits into a keyway in the gearbox. 4 Use a very long STEEL, not stainless, bolt screw it into the bottom of the motor shaft. 5 Use a very heavy hammer and drive the shaft up and out of the gearbox. Fair Winds, Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com [mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com] On Behalf Of Dimitris Krassopoulos Sent: Sunday, April 15, 2007 4:00 AM To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul Eric, Exactly the outhaul motor Dimitris _____ From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com [mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com] On Behalf Of eric Sent: Sunday, April 15, 2007 4:22 AM To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul Dimitris, Are you talking about the outhaul motor on the boom? If so I can give you directions. Fair Winds, Eric Amel Super Maramu #376 Kimberlite ' _____ From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com [mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com] On Behalf Of Dimitris Krassopoulos Sent: Saturday, April 14, 2007 2:54 PM To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com Subject: [Amel Yacht Owners] Electric Motor for outhaul Has any one experience of removing the electric motor from the boom? Mine has sheared of the screws and I have to try to fix it in a shop. My main problem is how to remove the shaft from the motor to take it away from the boat. I have removed the wire from inside the boat according to an advise from amel but they didn't mention how to remove the vertical shaft from the gear. SM 2000 Alma Libre <http://geo.yahoo. <http://geo.yahoo. <http://geo.yahoo. <http://geo.yahoo. <http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>
|
|
|
|
Electric Motor for outhaul
eric freedman
Dimitris,
It is easy to remove the vertical shaft from the outhaul. 1 Remove the screw from the arm that goes into the Anderson winch on the boom outhaul line. 2 Remove the nut and washers from the bottom of the outhaul motor shaft. 3 The only thing that is now holding the shaft in place is the rust on the shaft and a key, which sits into a keyway in the gearbox. 4 Use a very long STEEL, not stainless, bolt screw it into the bottom of the motor shaft. 5 Use a very heavy hammer and drive the shaft up and out of the gearbox. Fair Winds, Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] On Behalf Of Dimitris Krassopoulos Sent: Sunday, April 15, 2007 4:00 AM To: amelyachtowners@yahoogroups.com Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul Eric, Exactly the outhaul motor Dimitris _____ From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com [mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com] On Behalf Of eric Sent: Sunday, April 15, 2007 4:22 AM To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul Dimitris, Are you talking about the outhaul motor on the boom? If so I can give you directions. Fair Winds, Eric Amel Super Maramu #376 Kimberlite ' _____ From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com [mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com] On Behalf Of Dimitris Krassopoulos Sent: Saturday, April 14, 2007 2:54 PM To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com Subject: [Amel Yacht Owners] Electric Motor for outhaul Has any one experience of removing the electric motor from the boom? Mine has sheared of the screws and I have to try to fix it in a shop. My main problem is how to remove the shaft from the motor to take it away from the boat. I have removed the wire from inside the boat according to an advise from amel but they didn't mention how to remove the vertical shaft from the gear. SM 2000 Alma Libre <http://geo.yahoo. <http://geo.yahoo. <http://geo.yahoo. <http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>
|
|
|
|
Re: [Amel Yacht Owners] Electric Motor for outhaul
Dimitris Krassopoulos <dkra@...>
Eric,
Exactly the outhaul motor Dimitris _____ From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] On Behalf Of eric Sent: Sunday, April 15, 2007 4:22 AM To: amelyachtowners@yahoogroups.com Subject: RE: [Amel Yacht Owners] Electric Motor for outhaul Dimitris, Are you talking about the outhaul motor on the boom? If so I can give you directions. Fair Winds, Eric Amel Super Maramu #376 Kimberlite ' _____ From: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com [mailto:amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com] On Behalf Of Dimitris Krassopoulos Sent: Saturday, April 14, 2007 2:54 PM To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com> yahoogroups.com Subject: [Amel Yacht Owners] Electric Motor for outhaul Has any one experience of removing the electric motor from the boom? Mine has sheared of the screws and I have to try to fix it in a shop. My main problem is how to remove the shaft from the motor to take it away from the boat. I have removed the wire from inside the boat according to an advise from amel but they didn't mention how to remove the vertical shaft from the gear. SM 2000 Alma Libre <http://geo.yahoo. <http://geo.yahoo. <http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>
|
|
|
|
Re: [Amel Yacht Owners] Electric Motor for outhaul
eric freedman
Dimitris,
Are you talking about the outhaul motor on the boom? If so I can give you directions. Fair Winds, Eric Amel Super Maramu #376 Kimberlite ' _____ From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] On Behalf Of Dimitris Krassopoulos Sent: Saturday, April 14, 2007 2:54 PM To: amelyachtowners@yahoogroups.com Subject: [Amel Yacht Owners] Electric Motor for outhaul Has any one experience of removing the electric motor from the boom? Mine has sheared of the screws and I have to try to fix it in a shop. My main problem is how to remove the shaft from the motor to take it away from the boat. I have removed the wire from inside the boat according to an advise from amel but they didn't mention how to remove the vertical shaft from the gear. SM 2000 Alma Libre <http://geo.yahoo. <http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId=2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>
|
|
|
|
Electric Motor for outhaul
Dimitris Krassopoulos <dkra@...>
Has any one experience of removing the electric motor from the boom? Mine
has sheared of the screws and I have to try to fix it in a shop. My main problem is how to remove the shaft from the motor to take it away from the boat. I have removed the wire from inside the boat according to an advise from amel but they didn't mention how to remove the vertical shaft from the gear. Dimitris SM 2000 Alma Libre <http://geo.yahoo.com/serv?s=97359714/grpId=5036225/grpspId=1705065792/msgId =2849/stime=1176565255/nc1=4438963/nc2=4430620/nc3=3848618>
|
|
|
|
Re: [Amel Yacht Owners] Cockpit bilge pump
eric freedman
John,
Thanks for the info, I ordered the gaiter from depco pumps yesterday. Fair Winds, Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] On Behalf Of John and Anne on Bali Hai Sent: Friday, April 13, 2007 10:54 AM To: amelyachtowners@yahoogroups.com Subject: [Amel Yacht Owners] Cockpit bilge pump Hello Eric, The pump is a Henderson Mark V Model No MH0510. The parts listed are MH8050 Service Kit for all single action Mark V pumps, MH9901 Deck Seal Kit (black)including Gaiter and bolts or MH9904 in white. The Email address is salesatwhale.ltd.uk. Best wishes, Anne and John SM319
|
|
|
|
Cockpit bilge pump
John and Anne on Bali Hai <annejohn@...>
Hello Eric,
The pump is a Henderson Mark V Model No MH0510. The parts listed are MH8050 Service Kit for all single action Mark V pumps, MH9901 Deck Seal Kit (black)including Gaiter and bolts or MH9904 in white. The Email address is salesatwhale.ltd.uk. Best wishes, Anne and John SM319
|
|
|
|
Henderson bilge pump
eric freedman
Hi,
I need to order a gasket that goes under the manual bilge pump cover in the cockpit. I forgot to write down the model number or name of the Henderson bilge pump. I am far away from Kimberlite. Could someone please send me this information? Fair Winds, Eric Amel Super Maramu #376 Kimberlite
|
|
|
