Date   

Re: BANANA BAY MARINA COSTA RICA

Daniel R. Scoggin
 

--- In amelyachtowners@yahoogroups.com, "pjppappas" <pjppappas@...> wrote:

I have reservations at Banana Bay this winter. Has anyone visited this
marina, if so could you give me your opion. thank you Peter
Pappas "callisto" sm 369 Pt. Vallarta, Mexico
Peter, I can echo everything Jim wrote, as a mater of fact we spent 5 month in the slip next to
Pao San. I would add that northern Panama is well worth exploring. We did this on a trip out
of Costa Rica to renew our visa. Dan & Sandy on S/V Black Diamond sm 430, San Francisco.


Re: [Amel Yacht Owners] amel santorin rigging ,anchorchain

Battaglini Ornella Barbara <ornella.battaglini@...>
 

Hy Phil
my Santorin 1995 has a 10 mm chain with cqr 46 lbs and no problem with moorings (since now)
Also in my previous boat (Wauquiez Hood 38, 10 tons) I had 10 mm chain without mooring problem
Hoping to meet you in Med this summer
Ornella
Santorin Earendil N° 122

----- Original Message -----
From: phil.berghmans
To: amelyachtowners@yahoogroups.com
Sent: Thursday, June 19, 2008 11:41 AM
Subject: [Amel Yacht Owners] amel santorin rigging ,anchorchain


hello everyone,

i've just bougth a amel santorin 1994 in the Med.We are planning to
leave the med april/ may next year.Through the red sea or via
Gibralter Atlantic we don't know yet.

We had a survey done wich was overall quite positive (she's a clean boat
wich didn't cruise that much)Previous owner kept her in a permenent
mooring in a marina and did some daysailing i presume.

The surveyor had 2 remarks about the rigging being 14 years old and
better should be changed allthough it doesn't show any signs off teare
and weare?Does anyone have any advise or experiance with this and what
this would cost?

Second there is an 8mm galvenised anchorchain with a 20 kg cqr anchor
wich i am planning to replase by a 30kg type bugel,spade or rocna
anchor.The surveyor said the 8mm chain is to ligth for a 14m boat off
about 11 or 12 ton loaded and should be changed by a 10 mm chain?
Does anyone have any experience or advice on this?

I thank you and glad to join the club!

phil from "2 miles ahead"






------------------------------------------------------------------------------



Internal Virus Database is out of date.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.0.0/1489 - Release Date: 07/06/2008 11.17


[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] amel santorin rigging ,anchorchain

amelforme
 

Hi Phil ,Hope you get a lot of pleasure from your Santorin .Your surveyor
gave you very good advice .Stainless steel "work hardens" and becomes more
and more brittle every time it goes through a load-unload cycle .It can look
brand new and fail without warning .15 years should be considered a full
life for even the finest quality rigging .When you do replace the rigging
,look into mechanical end fittings like Norsemen or Stalock in stead of
swaged fittings as they are stronger .You will sleep better with the larger
size chain .

All the best,
Joel F. Potter

Joel F. Potter - Cruising Yacht Specialist, LLC
Amel's Sole Associate for the Americas
Mailing Address: 401 East Las Olas Boulevard #130-126
Fort Lauderdale, Florida 33301
Phone: (954) 462-5869 Fax: (954) 462-3923
Email: jfpottercys@att.net


amel santorin rigging ,anchorchain

phil.berghmans <no_reply@...>
 

hello everyone,

i've just bougth a amel santorin 1994 in the Med.We are planning to
leave the med april/ may next year.Through the red sea or via
Gibralter Atlantic we don't know yet.

We had a survey done wich was overall quite positive (she's a clean boat
wich didn't cruise that much)Previous owner kept her in a permenent
mooring in a marina and did some daysailing i presume.

The surveyor had 2 remarks about the rigging being 14 years old and
better should be changed allthough it doesn't show any signs off teare
and weare?Does anyone have any advise or experiance with this and what
this would cost?

Second there is an 8mm galvenised anchorchain with a 20 kg cqr anchor
wich i am planning to replase by a 30kg type bugel,spade or rocna
anchor.The surveyor said the 8mm chain is to ligth for a 14m boat off
about 11 or 12 ton loaded and should be changed by a 10 mm chain?
Does anyone have any experience or advice on this?

I thank you and glad to join the club!

phil from "2 miles ahead"


Re: [Amel Yacht Owners] Coppercoat

Ian Shepherd
 

Hi Ian,

The link below your message takes me to an Iron Man game. I am afraid to a
Copper Man! I think it is cinema related which may be why Indiana Jones came
up for someone else. CopperCoat sounds interesting. Copper cladding was
after all the solution used by sailing vessels of yesteryear, and so it
should work. I tried adding an antibiotic powder to the paint a couple of
years ago. So far it's been OK though I do have to brush off the occasional
loose growth occasionally. But then I have been marina bound for most of
that time, though I hope to be on the move for a while in a couple of weeks
time.

Regards

Ian Shepherd - Crusader SM 414

-------Original Message-------

From: Ian & Judy Jenkins
Date: 06/18/08 13:22:46
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Coppercoat


Hi Eric, What link did you click onto????Try www.coppercoat.com or www
coppercoat.co.uk
It's clear from one of the yachting magazine trials that they refer to on
the Coppercoat website ( the Practical Boat Owner magazine, a UK
publication) that there have been other manufacturers in the past who have
had limited success in trying to produce a similar product but it does seem
that these particular manufacturers have cracked it. Hope so!
Cheers, Ian

http://clk.atdmt.com/UKM/go/msnnkmgl0010000009ukm/direct/01/


unsuscribe

Christophe <clgx@...>
 

Can you stop forwarding me the messages of the group, I'm out for more than one month.

Thank you !

Christophe
clgx@mail.pf


Re: [Amel Yacht Owners] BANANA BAY MARINA COSTA RICA

Jim Dernehl <jim.dernehl@...>
 

Peter

I spent over (1) one year in Banana Bay Marina and know almost
everyone there . It has a wonderful relaxed atmosphere and a very good
staff. Bruce Blevins runs the place and will do anything to make your
stay comfortable. You will not want to leave----I know I did not ! Ask
for RUDY to maintain your boat and it will look factory new at very
reasonable price---he spends all day polishing. The marina restaurant is
good and I hope Fernado is still the cook---he did a outstanding job
with fresh fish. Golfito has a interesting history and if development
occurs a good future. The only problem is remoteness and limited air
flights out. Sailing in is easy and safe---also like most of South
America replacement parts are hard to get.

Best Jim Dernehl
PAO-SAN #88

________________________________

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of pjppappas
Sent: Wednesday, June 18, 2008 2:50 PM
To: amelyachtowners@yahoogroups.com
Subject: [Amel Yacht Owners] BANANA BAY MARINA COSTA RICA



I have reservations at Banana Bay this winter. Has anyone visited this
marina, if so could you give me your opion. thank you Peter
Pappas "callisto" sm 369 Pt. Vallarta, Mexico


BANANA BAY MARINA COSTA RICA

pjppappas <pjppappas@...>
 

I have reservations at Banana Bay this winter. Has anyone visited this
marina, if so could you give me your opion. thank you Peter
Pappas "callisto" sm 369 Pt. Vallarta, Mexico


Coppercoat

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

'Scuse my enthusiasm for this subject but I have now been prompted to reread through all the Coppercoat website and I'm now keener on the stuff than ever. It is indeed inert and so you can leave your boat ashore without any loss of effectiveness; some people use a power wash to get the slime off once a year--others don't bother.I suspect that if you actually take your boat out sailing the slime ain't an issue....one customer actually comments "it was helped by the fact that we used the boat twice this season"!!! Some people give the the hull a quick rub down with a scotchbrite pad or similar just before each annual launch to ensure that the copper is exposed: others never take their boat out of the water.Many have used Coppercoat for 5-10 years and it is still going strong.
It's clear that there were at least 6 competing producers who got it wrong and went out of business. A number of them had similar names as they obviously all wanted to advertise the fact that they had copper in their product, so if someone tells you that he used"it" and that "it" didn't work you might check precisely whose product he used.
Although it can be applied by anyone, the secret , once you have your hull prepared, is to only mix small amounts at any time and get it on quickly. Small? One litre at a time, to ensure that the copper is well mixed. I suspect that you would benefit from having one person mixing and two applying, but I'm going to get it done for me by some guys who do it for a living.
I begin to sound like a salesman for the product. Do check out their website if you are interested. I have also found them to be quick and detailed respondents to my emailed enquiries.
Cheers, Ian and Judy, Pen Azen,SM 302
_________________________________________________________________

All new Live Search at Live.com

http://clk.atdmt.com/UKM/go/msnnkmgl0010000006ukm/direct/01/


Re: [Amel Yacht Owners] Coppercoat

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

Hi Eric, What link did you click onto????Try www.coppercoat.com or www.coppercoat.co.uk
It's clear from one of the yachting magazine trials that they refer to on the Coppercoat website ( the Practical Boat Owner magazine, a UK publication) that there have been other manufacturers in the past who have had limited success in trying to produce a similar product but it does seem that these particular manufacturers have cracked it. Hope so!
Cheers, Ian

http://clk.atdmt.com/UKM/go/msnnkmgl0010000009ukm/direct/01/


Photos of Outhaul Gear Box Components and Anderson Winch

amelliahona <no_reply@...>
 

Hi Everyone:

I have posted some photos in the photos section of the outhaul gearbox components and the
Anderson Winch disassembled, (see SM Out Haul Service) This is for my Amel SM 2001.

I tried removing the drive shaft by the method of using a long steel bolt inserted into the
bottom of the drive shaft. Despite two days of penetrating oil and pounding on the bolt with
a 2 pound sledge until I though I would damage the boom I was unable to loosen the drive
shaft. I enlisted the help of a A1 Marine Services in Jolly Harbour, Antigua and they came
with the largest puller I have ever seen and clamped onto the gearbox upper seal area and
pushed the drive shaft out with the pullers long screw. Even then it was tough going. I
intend to completely overhaul this unit and paint it. It appears to me that the paint failed due
to poor primer application. Both the outhaul and mainsail furling gearbox's paint failed in
the same manner. I suspect that both gearboxes are similar.

Anybody else out there completed this overhaul of the gearbox that knows if there is a
thrust bearing of some sort at the end of the worm drive gear? I came home from the boat
before completely disassembly and need to order parts.

Regards, Gary Silver s/v Liahona


Re: [Amel Yacht Owners] Coppercoat

eric freedman
 

Hi Ian,

please click on the link here it connects to Indiana jones.

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite





_____

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of Ian & Judy Jenkins
Sent: Tuesday, June 17, 2008 3:43 PM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Coppercoat




http://clk.atdmt.
<http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/>
com/UKM/go/msnnkmgl0010000007ukm/direct/01/


Re: [Amel Yacht Owners] Coppercoat

eric freedman
 

Hi,

I clicked on the link and got Indiana Jones.

Is he doing boat bottoms now?

Fair Winds,

Eric

Amel Super Maramu #376 Kimberlite







_____

From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of Ian & Judy Jenkins
Sent: Tuesday, June 17, 2008 3:52 PM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Coppercoat




Thanks, Dave, I believe there have been a number of versions of this product
over the years, not all successful, but clearly there are owners who have
had excellent results which is why the company I have approached is now able
to boast some big manufacturers who use their product.
You make a good point about how long the boat can be hauled, which I will
check, but from my understanding of the product it is inert and therefore
should not be affected by being out of the water. The guy I will use to
apply the product ( I hesitate to call it a paint) leaves his boat ashore
for the winter.
http://clk.atdmt.
<http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/>
com/UKM/go/msnnkmgl0010000007ukm/direct/01/


Re: Maramu Mizzen Backstay(s)

woodsdeborah_56 <woodsdeborah_56@...>
 

Hi Howard and lynda,

I have an Amel Maramu 1979. The mizzen backstay is a single stay
ending in the centre of the deck close to the transom. I have to say
that we do have a position on the rail (pushpit) that was probably its
original position, this would not be as strong.

The foremast does have two stays that meet the deck via the stainless
tubing holding the cockpit roof up. she (Orion1) also has an
additional backstay in the centre that attaches alongside the point
that the mizzen is stepped. This stay is our HF antenna (aerial in UK
english) Hope this helps Deb

PS do you also have a prop driven alternator ?? This can be switched
in when sailing at 5knts or more to provide power for your electronic
auto pilot. (I note that your engine was missing when you bought the boat)


Re: [Amel Yacht Owners] Coppercoat

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

Thanks, Dave, I believe there have been a number of versions of this product over the years, not all successful, but clearly there are owners who have had excellent results which is why the company I have approached is now able to boast some big manufacturers who use their product.
You make a good point about how long the boat can be hauled, which I will check, but from my understanding of the product it is inert and therefore should not be affected by being out of the water. The guy I will use to apply the product ( I hesitate to call it a paint) leaves his boat ashore for the winter.
http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/

[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Coppercoat

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/

[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Re: Maramu Vent in Galley

William Klein <sidecar1@...>
 

Deb, I also have a Maramu and have investigated replacement headliner material. Sailrite has a padded vinyl type material that I saw at some boat shows. They also carry non padded material. Their web site is www.sailrite.com. --Bill Klein

----- Original Message -----
From: woodsdeborah_56
To: amelyachtowners@yahoogroups.com
Sent: Tuesday, June 17, 2008 3:12 PM
Subject: [Amel Yacht Owners] Re: Maramu Vent in Galley



Hi
The outside locker is a gas locker for gas bottles. The pipe from this
locker feeds to a gas valve on/off that is housed inside your 'vent'.
Hope this makes sense. Couls I ask what you are replacing the head
lining with as I need to do the same thing on our 79 Maramu

Regards
Deb

--- In amelyachtowners@yahoogroups.com, "Howard Berger"
<svresolute@...> wrote:
>
> In the refit of our Maramu #144 we're currently attacking the interior,
> replacing the overhead throughout the boat. In doing so, I took a
> picture of what appears to be a vent above the galley on the port side
> abaft the portlight. Can anyone please tell me what it's for? There's
> also a "locker" immediately above it topside that's covered by a panel
> that screws into place. We're also scratching our heads as to its
> purpose.
>
> I posted the picture(s) in a new photo album named s/v Jazz here on the
> site. For those who might be interested in getting a look at the refit
> as it progresses, there's a photo album on Facebook you can reach with
> the following link:
>
> http://www.facebook.com/album.php?aid=3504&l=995ee&id=1015036831
>
> Best regards,
> Howard Berger
>


Re: [Amel Yacht Owners] Re: Maramu Vent in Galley

William Klein <sidecar1@...>
 

----- Original Message -----
From: woodsdeborah_56
To: amelyachtowners@yahoogroups.com
Sent: Tuesday, June 17, 2008 3:12 PM
Subject: [Amel Yacht Owners] Re: Maramu Vent in Galley



Hi
The outside locker is a gas locker for gas bottles. The pipe from this
locker feeds to a gas valve on/off that is housed inside your 'vent'.
Hope this makes sense. Couls I ask what you are replacing the head
lining with as I need to do the same thing on our 79 Maramu

Regards
Deb

--- In amelyachtowners@yahoogroups.com, "Howard Berger"
<svresolute@...> wrote:
>
> In the refit of our Maramu #144 we're currently attacking the interior,
> replacing the overhead throughout the boat. In doing so, I took a
> picture of what appears to be a vent above the galley on the port side
> abaft the portlight. Can anyone please tell me what it's for? There's
> also a "locker" immediately above it topside that's covered by a panel
> that screws into place. We're also scratching our heads as to its
> purpose.
>
> I posted the picture(s) in a new photo album named s/v Jazz here on the
> site. For those who might be interested in getting a look at the refit
> as it progresses, there's a photo album on Facebook you can reach with
> the following link:
>
> http://www.facebook.com/album.php?aid=3504&l=995ee&id=1015036831
>
> Best regards,
> Howard Berger
>


Re: Maramu Vent in Galley

woodsdeborah_56 <woodsdeborah_56@...>
 

Hi
The outside locker is a gas locker for gas bottles. The pipe from this
locker feeds to a gas valve on/off that is housed inside your 'vent'.
Hope this makes sense. Couls I ask what you are replacing the head
lining with as I need to do the same thing on our 79 Maramu

Regards
Deb


--- In amelyachtowners@yahoogroups.com, "Howard Berger"
<svresolute@...> wrote:

In the refit of our Maramu #144 we're currently attacking the interior,
replacing the overhead throughout the boat. In doing so, I took a
picture of what appears to be a vent above the galley on the port side
abaft the portlight. Can anyone please tell me what it's for? There's
also a "locker" immediately above it topside that's covered by a panel
that screws into place. We're also scratching our heads as to its
purpose.

I posted the picture(s) in a new photo album named s/v Jazz here on the
site. For those who might be interested in getting a look at the refit
as it progresses, there's a photo album on Facebook you can reach with
the following link:

http://www.facebook.com/album.php?aid=3504&l=995ee&id=1015036831

Best regards,
Howard Berger


Re: Order Parts from Amel

woodsdeborah_56 <woodsdeborah_56@...>
 

--- In amelyachtowners@yahoogroups.com, "agav8ter" <agav8ter@...> wrote:
hi Ian
You probably have this info but we recently needed to get advice and
order a cutlass bearing from Amel they were very helpful at customer
service and advised that we should fax them an order with payment
details. Hope this helps
Deb
Orion1
Chantiers AMEL - La Rochelle
Z.I , rue Joseph Cugnot, BP 15
17182 Périgny cedex
France
Tel. : +33(0)546.55.17.31
Tel. Customer's Service :
+33(0)546.55.17.18
+33(0)546.55.00.75
Fax. : +33(0)546.45.43.03


Hello All,

I have send three emails to; olivierbeute@... trying to order a few
parts. I have never recieved any reply, nor did I get a "non delivery
notice". Can anyone supply me with the correct name and address for
parts orders? FWI, I need to find the locking latches for the lockers
in our SM 2000 #266.

Thanks!
Tony Gray
WORLD CITIZEN
SM #266