Date   

Re: [Amel Yacht Owners] Alternator replacement

rossirossix4
 
Edited

There are 8 NIB voltage regulator regulators (model 8RL3021 105-351 new in box) , presently available on eBay  https://www.ebay.com/p/18020353785 .  Although they are listed at $29 but they did accept an offer for $19 (includes shipping).  This is the OEM voltage regulator for the Leece-Neville 24V 175 AMP alternator 8SC3009ZA.  The 8RL3021 may have been superseded  by the 8RL3024S but its price is around $80.
Bob and Suzanne  KAIMI SM429


Re: Annapolis Boat Show

Danny and Yvonne SIMMS
 

An Amel takeover.

Danny

On 22 September 2019 at 00:15 "Patrick McAneny via Groups.Io" <sailw32@...> wrote:

Charles, Initially I reserved a table for 8 then 12 and a couple of days ago called and asked if we could get a table for 16 . We now have 15 coming ,so I guess we can squeeze in 17 ,so please join us. I will not ,even if possible try to get a larger table ,I don't think they want to hear from me again. So if anyone else would like to come ,please just show up and you probably can get a table nearby,we will be upstairs. 
See Ya There,
Pat & Diane
SM Shenanigans


-----Original Message-----
From: Charles Bell <shipbldr2000@...>
To: main <main@AmelYachtOwners.groups.io>
Sent: Fri, Sep 20, 2019 10:42 am
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

Hello Pat,

We will also be at the show and would like to join the group for dinner if there is space enough for the two of us.

Thank you,

Charles & Hae
SV Jupiter
Mango #29


Re: Canvas work in Eastern Med

Paul Brown
 

Hello Nick, I had a refit completed to a catamaran 60 foot by Lantana Canvas family in Marmaris and Gocek in 2017, they did 16,000 euros of work from couches, covers, bedding and awnings etc, I was more than happy with their work and handling of the project that we both work together on and their prices were very acceptable following negotiations and the best I have found in the eastern med and perhaps the western med also

Regards Paul - Fortuna II 55/17


On 21 Sep 2019, at 4:08 pm, ngtnewington Newington via Groups.Io <ngtnewington@...> wrote:

Hello fellow Amel owners,

I am thinking of getting some upholstery and canvas work done for Amelia. Specifically I want to replace the saloon cushions and covers. The foam itself is beginning to deteriorate and the covers are pretty tatty.
So that would be a case of replacing like for like.

In addition I would like to have a winter cockpit enclosure made. I have looked at the NV website and their design, it looks good but is pretty expensive.

Next year we will be sailing over to Turkey and the Dodecanese. I was thinking that I might get a good job done in Turkey for a reasonable price. Not to mention the VAT aspect of ordering from NV in France.

I am looking for recommendations for, I guess, Turkey.???? 

Kind regards

Nick

S/Y Amelia AML 54-019

 Kefalonia for now.


Re: Canvas work in Eastern Med

Mohammad Shirloo
 

Hi Nick;

One of the best upholstery guys we have run into is a guy by the name of Ebrahim in Didim Turkey.

He made a full winter cover for us in 3 pieces that has held up as new after 5 seasons of use in the Med where 50+ knots of wind are common. He also made a memory foam mattress for the master that has given us many great nights of sleep. As honest as they come, a physics professor and a good guy.

We also referred another Suoer Maramu owner friend of ours that replaced all of his cushions and was very happy.

+90 (532) 770 22 11. Let him
Know I referred you and say hello from us.

Mohammad and Aty
B&B Kokomo
Amel 54 #099

On Sep 21, 2019, at 4:57 PM, Arnold Mente via Groups.Io <Arnold.mente@...> wrote:

Dear Nick,

I was in contact with a friend 5 minutes ago sailing in Turkey. There is schwarzewolke.com and the attached business cards from 3 others working well in Marmaris.

Kind regards

Arnold

SY Zephyr SM203

Am 21.09.2019 um 16:08 schrieb ngtnewington Newington via Groups.Io <ngtnewington@...>:

Hello fellow Amel owners,

I am thinking of getting some upholstery and canvas work done for Amelia. Specifically I want to replace the saloon cushions and covers. The foam itself is beginning to deteriorate and the covers are pretty tatty.
So that would be a case of replacing like for like.

In addition I would like to have a winter cockpit enclosure made. I have looked at the NV website and their design, it looks good but is pretty expensive.

Next year we will be sailing over to Turkey and the Dodecanese. I was thinking that I might get a good job done in Turkey for a reasonable price. Not to mention the VAT aspect of ordering from NV in France.

I am looking for recommendations for, I guess, Turkey.???? 

Kind regards

Nick

S/Y Amelia AML 54-019

 Kefalonia for now.



<86aa1df4-f924-474f-9a3b-1182a86d3981.jpeg><f85fb01b-b282-4e4b-b9fe-901b19e5bf41.jpeg><13809a8d-1801-4ff2-8180-f7ceae1076c0.jpeg>

--
SY Zephyr SM203


Re: [EXTERNAL] - [AmelYachtOwners] Berth in Lisbon area

Jose Alegria
 

Joerg hi

john is right Cascais anchorage is excellent, the bottom is sandy, very good and i spent there dozens of weekends. It will be uncomfortable with southwest winds, but the Cascais marina when the weather is very bad allows you to dock at the waiting pier.
I'll try in Cascais marina  to get a berth for you but next monday
What is the name of your  boat ?
José Alegria
A55#003-MERIT
josealegr@...
Mobile: + 351 91 866 30 37




On Sat, 21 Sep 2019 at 16:54, John Clanton <jclanton@...> wrote:
Joerg,

We stayed in the Cascais marina last year, and there was a fairly large anchorage just outside the entrance. I have no knowledge of the holding, but there were some large boats there. 

John

On Sep 21, 2019, at 17:34, Joerg Esdorn via Groups.Io <jhe1313@...> wrote:

We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26.  We’ve been unable to make a reservation at Cascais or any of the other marinas in Lisbon.  Anyone have a mooring or berth available or an idea where to check?  In addition to Cascais, I reached out to Oreias, Alcântara and Parque de Naciones and they are all full.  Many thanks for any help you can provide!  

Joerg Esdorn
A55 Kincsem


Re: Berth in Lisbon area

Jose Alegria
 

Joerg hi

Next Monday I will try my best at Oeiras or Cascais marinas.
Keep in touch 
José Alegria
A55#003MERIT
josealegr@...
Mobile: + 351 91 866 30 37




On Sat, 21 Sep 2019 at 16:34, Joerg Esdorn via Groups.Io <jhe1313=yahoo.com@groups.io> wrote:
We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26.  We’ve been unable to make a reservation at Cascais or any of the other marinas in Lisbon.  Anyone have a mooring or berth available or an idea where to check?  In addition to Cascais, I reached out to Oreias, Alcântara and Parque de Naciones and they are all full.  Many thanks for any help you can provide!  

Joerg Esdorn
A55 Kincsem


Annapolis Boat Show--Harmonie Open Boat--Oct 12

Karen Smith
 

In addition to the other meet-ups around the Annapolis Boat show, we will be hosting an "open boat" onboard Harmonie SM160 from 4 to 8PM on Saturday Oct 12.  We are docked at Burt Jabin's Yacht Yard, a short water taxi (or dinghy!) ride from the boat show in Back Creek Annapolis.  Refreshments will be served...

Harmonie is fresh from a summer cruising Atlantic Canada so great cruising stories will be available to swap. We'll likely be in the middle of some projects, so the boat might not be in showroom shape, but it will be a more informative visit for all that!

RSVP to kls6917 (at) aol.com

Looking forward to seeing our fellow Amel owners (and potential owners)!

Karen Smith & Bill Kinney
S/V Harmonie
SM160
http://fetchinketch.net


Re: [EXTERNAL] - [AmelYachtOwners] Berth in Lisbon area

John Clanton <jclanton@...>
 

Joerg,

We stayed in the Cascais marina last year, and there was a fairly large anchorage just outside the entrance. I have no knowledge of the holding, but there were some large boats there. 

John

On Sep 21, 2019, at 17:34, Joerg Esdorn via Groups.Io <jhe1313@...> wrote:

We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26.  We’ve been unable to make a reservation at Cascais or any of the other marinas in Lisbon.  Anyone have a mooring or berth available or an idea where to check?  In addition to Cascais, I reached out to Oreias, Alcântara and Parque de Naciones and they are all full.  Many thanks for any help you can provide!  

Joerg Esdorn
A55 Kincsem


Berth in Lisbon area

Joerg Esdorn
 

We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26.  We’ve been unable to make a reservation at Cascais or any of the other marinas in Lisbon.  Anyone have a mooring or berth available or an idea where to check?  In addition to Cascais, I reached out to Oreias, Alcântara and Parque de Naciones and they are all full.  Many thanks for any help you can provide!  

Joerg Esdorn
A55 Kincsem


Re: Canvas work in Eastern Med

Arnold Mente
 

Dear Nick,

I was in contact with a friend 5 minutes ago sailing in Turkey. There is schwarzewolke.com and the attached business cards from 3 others working well in Marmaris.

Kind regards

Arnold

SY Zephyr SM203

Am 21.09.2019 um 16:08 schrieb ngtnewington Newington via Groups.Io <ngtnewington@...>:

Hello fellow Amel owners,

I am thinking of getting some upholstery and canvas work done for Amelia. Specifically I want to replace the saloon cushions and covers. The foam itself is beginning to deteriorate and the covers are pretty tatty.
So that would be a case of replacing like for like.

In addition I would like to have a winter cockpit enclosure made. I have looked at the NV website and their design, it looks good but is pretty expensive.

Next year we will be sailing over to Turkey and the Dodecanese. I was thinking that I might get a good job done in Turkey for a reasonable price. Not to mention the VAT aspect of ordering from NV in France.

I am looking for recommendations for, I guess, Turkey.???? 

Kind regards

Nick

S/Y Amelia AML 54-019

 Kefalonia for now.




--
SY Zephyr SM203


Canvas work in Eastern Med

ngtnewington Newington
 

Hello fellow Amel owners,

I am thinking of getting some upholstery and canvas work done for Amelia. Specifically I want to replace the saloon cushions and covers. The foam itself is beginning to deteriorate and the covers are pretty tatty.
So that would be a case of replacing like for like.

In addition I would like to have a winter cockpit enclosure made. I have looked at the NV website and their design, it looks good but is pretty expensive.

Next year we will be sailing over to Turkey and the Dodecanese. I was thinking that I might get a good job done in Turkey for a reasonable price. Not to mention the VAT aspect of ordering from NV in France.

I am looking for recommendations for, I guess, Turkey.???? 

Kind regards

Nick

S/Y Amelia AML 54-019

 Kefalonia for now.


Re: Annapolis Boat Show

Patrick McAneny
 

Charles, Initially I reserved a table for 8 then 12 and a couple of days ago called and asked if we could get a table for 16 . We now have 15 coming ,so I guess we can squeeze in 17 ,so please join us. I will not ,even if possible try to get a larger table ,I don't think they want to hear from me again. So if anyone else would like to come ,please just show up and you probably can get a table nearby,we will be upstairs. 
See Ya There,
Pat & Diane
SM Shenanigans


-----Original Message-----
From: Charles Bell <shipbldr2000@...>
To: main <main@AmelYachtOwners.groups.io>
Sent: Fri, Sep 20, 2019 10:42 am
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

Hello Pat,

We will also be at the show and would like to join the group for dinner if there is space enough for the two of us.

Thank you,

Charles & Hae
SV Jupiter
Mango #29


Re: Annapolis Boat Show

Scott SV Tengah
 

We are in and my girlfriend's name is Mie (pronounced Mia). Thanks for setting this up!
--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com


Re: Annapolis Boat Show

Charles Bell
 

Hello Pat,

We will also be at the show and would like to join the group for dinner if there is space enough for the two of us.

Thank you,

Charles & Hae
SV Jupiter
Mango #29


Re: B&G Hydra 3000 True wind direction

Dean Gillies
 

Hi Wolfgang,
I noticed exactly the same problem when I bought Stella. I’m pretty sure that my system was configured as original from Amel. (Previous owner did not change anything).

I cannot find out right now exactly what source setting I used in the Hydra, but I’m fairly sure it’s not 16.

BUT the important thing is that you need to make sure that the Navnet3D system is actually connected to, AND is sending out heading data to the Hydra.

This is configured in the setup/installation process, and on my boat this was not turned on by Amel/Pochon.

So, in short the process is:

1. Find out which NMEA data Out port on the master MFD is physically connected to the Hydra.

2. Make sure the MFD is configured to send heading data on that port.

3. Set up the Hydra to use that data.

I’m sorry I cannot tell you which port numbers to use because I’m travelling at the moment. Regardless, your boat may not be wired exactly as mine, so you should go through the process yourself.

Hop that helps a bit.

Regards
Dean
SY Stella
A54-154

Sent from my iPhone X


Re: Furuno “Loss of GPS”/DOP Error alarm and AIS help

Dean Gillies
 

Hi Tony,
The Navnet3D system has a failover action with GPS that I’ve observed, which may be relevant to your problem.

Typically there is more than one GPS data source available in a system. In my case it was the FA50 AIS and the GP150. The source to be used is selected as you step through the system installation process. In my case it was selected to be the GP150.
If during normal operation, the source of GPS fails then the system automatically changes to the other GPS source. In my case, the GP150 failed and the system started to use the FA50 AIS as the source of GPS. I knew nothing about the change, as the system just did it automatically.
It took some time before I noticed the GP150 had actually failed and was not supplying GPS data anymore.

This does not help with the question of why your GP150 is faulty, but may help in your understanding of what has happened in your system.

Furuno would not repair my GP150 so I bought a a couple of inexpensive GPS antennas with NMEA outputs and located them behind the instrument table. They are now my (dual redundant) primary source of GPS for the system.

Good luck!
Dean
SY Stella
A54-154


Re: B&G Hydra 3000 True wind direction

 

Wolfgang,

Maybe it is as simple as needing calibration. I would pull the manual and try that first.

Good luck.

--
CW Bill Rouse Amel Yacht Owners School
Address: 720 Winnie, Galveston Island, Texas 77550 
   


On Thu, Sep 19, 2019 at 5:16 PM Wolfgang Weber via Groups.Io <webercardio=yahoo.com@groups.io> wrote:
Bill, thank you.
TWS, AWS , speed etc is working perfect. I only wondered why the point True Winddirection is always on 000 M.
Wolfgang


Re: B&G Hydra 3000 True wind direction

Wolfgang Weber
 

Bill, thank you.
TWS, AWS , speed etc is working perfect. I only wondered why the point True Winddirection is always on 000 M.
Wolfgang


Re: Annapolis Boat Show

Alan Grayson
 

Thank you, look forward to it


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Patrick McAneny via Groups.Io <sailw32@...>
Sent: Thursday, September 19, 2019 2:57:58 PM
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
 
Alan, I was able to increase the table size ,so you and another couple could join us.
Se Ya There,
Pat&Diane
SM Shenanigans
-----Original Message-----
From: Alan Grayson <bazgrayson@...>
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Sent: Thu, Sep 19, 2019 12:15 pm
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

Hi Pat, sorry for the late notice but Laura & I would like to join in if possible
Regards
Alan &Laura Grayson
SM 406 “Ora Pai”


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of VLADIMIR SONSEV <sonsev52@...>
Sent: Thursday, September 19, 2019 8:23:20 AM
To: main@amelyachtowners.groups.io <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
 
I regret that we can't make it.
We will be in Europe.
Have a great time!

Vladimir and Marina
S/V Life is Good
SM 345

On Thu, Sep 19, 2019, 8:13 AM Patrick McAneny via Groups.Io <sailw32=aol.com@groups.io> wrote:
I was able to reserve a table for ten at Mangia's Italian Grill ,81 Main St. across from the show , for 6:30 pm on Friday ,Oct. 11 . 
Those attending are: 
Matt & Cindy ,Speed of Light A50
Scott & ? ,Tengah A54
Mike & Tom, Aletes SM
Pat & Diane ,Shenanigans SM
Kent, Kristy SM
Bill & Karen, Harmonie SM

We Look forward to seeing you all there,
Pat & Diane,
SV Shenanigans


-----Original Message-----
From: Patrick McAneny via Groups.Io <sailw32=aol.com@groups.io>
To: main <main@AmelYachtOwners.groups.io>
Sent: Mon, Sep 9, 2019 8:00 am
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

Kent, Too bad Iris can't make it ,but will see you there. I will make reservations ,if they take it for 6:30 ,looks like eight now ,I will wait to later this week to see if anyone else wants to join us.
Pat
SM Shenanigans


-----Original Message-----
From: karkauai via Groups.Io <karkauai=yahoo.com@groups.io>
To: main <main@amelyachtowners.groups.io>
Sent: Sun, Sep 8, 2019 7:11 pm
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

I will be there, too.  Iris is working a special event and can’t come.
Looking forward to seeing everyone.

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Sep 8, 2019, at 8:41 AM, Mike Ondra via Groups.Io <mdondra@...> wrote:

Sounds good, Pat. Magnia Friday night and you had put 6:30 on the table.
Seems a number of us will be on Back Creek so let’s see if there is interest in dinner at Davis’ on Thursday evening.
Mike
Aletes SM#240
 
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Patrick McAneny via Groups.Io
Sent: Sunday, September 8, 2019 7:47 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
 
Mike, Assuming everyone will be at the show, Mangia's is very convenient , right across the street from the show,a two minute walk. Its also a very nice place with great food , it also would not require people to somehow travel to Back Creek as the show is letting out.
Hope to see ya there,
Pat
SM Shenanigans

-----Original Message-----
From: Mike Ondra via Groups.Io <mdondra@...>
To: main <main@amelyachtowners.groups.io>
Sent: Sat, Sep 7, 2019 5:50 pm
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
Hi Pat. Tom and I hope to be there Thursday and Friday. A nice dinner place on Back Creek would be Davis’s Pub which a block from Mears Marina. May avoid some of the downtown hubbub. Rustic, good food and popular with the locals even during the week so reservations may be appropriate if they do them. Maybe both Thursday and Friday night Especially if Friday doesn’t work for some. Just a thought.
Mike
Aletes SM240

On Sep 7, 2019, at 6:55 AM, Patrick McAneny via Groups.Io <sailw32@...> wrote:
Kent ,would Friday about 6:30 work for you & Iris.
Pat
SM Shenanigans

-----Original Message-----
From: karkauai via Groups.Io <karkauai@...>
To: main <main@amelyachtowners.groups.io>
Sent: Fri, Sep 6, 2019 7:02 pm
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
Hi Pat,
Tell us when and where, I will be there, Iris may be able to come too.
Kent
SN243/Kristy
.
On Sep 6, 2019, at 9:49 AM, Matt Salatino via Groups.Io <helmsmatt@...> wrote:
Speed of Life
Amel 50, #27
~~~️~~~Matt

On Sep 6, 2019, at 9:36 AM, Patrick McAneny via Groups.Io <sailw32@...> wrote:
Matt, Ok thats one vote for Fri. What is the name/model of your boat ?
Pat 
SM #123

-----Original Message-----
From: Matt Salatino via Groups.Io <helmsmatt@...>
To: main <main@amelyachtowners.groups.io>
Sent: Fri, Sep 6, 2019 8:49 am
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
Cindy and I are driving in for the entire show. We have a previous engagement on Saturday, October 12, but Friday would be good.......
~~~️~~~Matt

On Sep 6, 2019, at 8:12 AM, Patrick McAneny via Groups.Io <sailw32@...> wrote:
Diane and I will be sailing to the boat show this year, as we have for the last 35 yrs. We would be anchored in the main anchorage and would invite everyone out to the boat for drinks and pizza and we could do that. But it may be more convenient to meet at a local restaurant across the street from the show. Mangia Italian Grill has great pizza ,etc. and is only about 100 ft. from the show. Friday or Sat. about 6:30 would work for us ,Sat. may be busier . If anyone would be interested, lets get a head count .
Seya There,
Pat & Diane,
SV Shenanigans

-----Original Message-----
From: karkauai via Groups.Io <karkauai@...>
To: main <main@amelyachtowners.groups.io>
Sent: Thu, Sep 5, 2019 9:29 am
Subject: [AmelYachtOwners] Annapolis Boat Show
Iris and I will be driving over to Annapolis for the show.  If there’s a get-together for dinner and/or drinks, we’d like to join in.
Kent Robertson
S/V Kristy SM243
St Michaels, MD

On Sep 4, 2019, at 10:23 AM, Mark McGovern <mfmcgovern@...> wrote:
Mike,

No problem.  JL Mertz's Speedi-Sleeve idea is a good one too as the surface finish on the shaft is really not good enough to ensure a good seal with the oil seal. 

Regarding the Annapolis Boat Show, we will definitely be at the show but we are not sure if we will taking Cara or just driving.  It's such a zoo around there at that time and we can't take the days off work to get there early enough to be ensured of a decent anchoring spot.  Definitely let me know what the plans are as they develop!

--
Mark McGovern
SM #440 Cara
Deale, MD USA


Re: EPIRB mounting location

Ryan Meador
 
Edited

Hi Vic,
 
One of our very clever crew members found a great spot for it.  Kelly built a sturdy mounting board with rubber feet and then the other crew member lashed the whole assembly to the mizzen mast above the outhaul winch.  It's out of the way, reasonably unobstructed, and much less likely to get released by a wave than a rail mount.  I've attached a photo.
 
Ryan and Kelly
SM 233 Iteration
Boston, MA, USA

On Wed, Sep 18, 2019 at 4:57 PM Vic Fryzel <vic.fryzel@...> wrote:
Where did you end up mounting it?