Date   
Re: WiFi Extenders - best 2019-2020

Matt Salatino
 

There are many systems out there to choose from. Costs for the kit start at close to $400.
They consist of a Ubiquity bullet (a radio receiver tuned for 2,4 ghz), a PoE injector (Power over Ethernet), and a wireless router. Of course it includes the requisite cabling. 
The kit parts can be purchased separately, for about $240, but the process of getting things programmed and talking to each other requires an I.T. professional, or software Engineer. (I’ll assume you’re not one, as if you were, you wouldn’t be asking in the first place.)
As I said, there are many kits available, this is but one:
Good luck we have one installed and it works well. We have good bandwidth up to about a kilometer, and workable data, not streaming, but email, web browsing, at up to 2 miles, depending on the strength of the source.

~~~⛵️~~~Matt

On Mar 14, 2020, at 3:32 PM, martin haméline <marafiki37@...> wrote:

Hola Amelians,

I am looking for current reviews on the best wifi extenders.......

I searched the user site files and couldn't find anything new or relevant.   Objective is to grab shore wifi while at anchor and work remotely with video calls, email etc... I know the quality depend on the source..

Appreciate your experience as I am looking to buy a system now.

Cheers,

Martin hAMELine
SV VoileOvent
Maramu # 129

Re: Rub Rail Rubber Inserts: Last Call

amelforme
 

There were a couple of different rub rails for the Mango and just one, all but certain, on the Sharks and Maramu. They share nothing in common with the Santorin and Super Maramu insert.

JOEL F. POTTER
CRUISING YACHT SPECIALIST LLC
THE EXPERIENCED AMEL GUY
Office 954-462-5869 

On Mar 14, 2020, at 1:04 PM, Karen Smith via Groups.Io <karenharmonie@...> wrote:

Charles,

My understanding is the Mango rail is quite different, but that is thirtd hand, at best Here is a photo of the insert from an early Super Maramu, before Amel switched to a white extrusion.

.
<IMG_1774.jpg>

Re: Rub Rail Rubber Inserts: Last Call

Karen Smith
 

Charles,

My understanding is the Mango rail is quite different, but that is thirtd hand, at best Here is a photo of the insert from an early Super Maramu, before Amel switched to a white extrusion.

.

Re: Rub Rail Rubber Inserts: Last Call

Charles Bell
 

Hello Karen,

I am interested in joining the order (will commit today)  if the rail you are going to extrude would fit my Amel Mango.

Do you have a profile/drawing/picture you can share? Or do you know if it will fit the Mango?

Thank you,

Charles

Re: WiFi Extenders - best 2019-2020

Paul Dowd and Sharon Brown
 

Martin,

 

We have been using a Webcatcher (I believe the same as a Bullet) which I bought from Diginav in Le Marin 4 years ago and it has worked perfectly ever since. There was a choice of 3 antenna sizes and I went for the middle one as a compromise between vertical beam width and range.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of martin haméline
Sent: 14 March 2020 10:32
To: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Subject: [AmelYachtOwners] WiFi Extenders - best 2019-2020

 

Hola Amelians,

 

I am looking for current reviews on the best wifi extenders.......

 

I searched the user site files and couldn't find anything new or relevant.   Objective is to grab shore wifi while at anchor and work remotely with video calls, email etc... I know the quality depend on the source..

 

Appreciate your experience as I am looking to buy a system now.

 

Cheers,

 

Martin hAMELine

SV VoileOvent

Maramu # 129


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Rub Rail Rubber Inserts: Last Call

Karen Smith
 

We have an extruder in the USA to make a custom extrusion of the Amel rubber rail that fits the Super Maramu and Santorin.

The material will be white EDPM, and it will be supplied in 2 pieces each 16 m (52'6") in length.  Cost will be $805 for the two pieces sufficient to replace both inserts on one boat.  Shipping will be from South Florida, and for UPS ground it ranges from <$200 for the lower 48, to $460 to Hawaii.

We have 10 boats signed on as interested, (which JUST covers the minimum order!) and will be scheduling the production run within a week or so, so if there is anyone else, this is your last chance!

Re: Identify this part

Giovanni TESTA
 

Hi Bill.
I think to fix the propeller we have on board, as spare, instead of Autoprop.
Best
Gianni
sv EUTIKIA SM2K 428

Il 14/03/2020 14:57, CW Bill Rouse ha scritto:
Here is a photo of the part to ID:
image.png
CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

View My Training Calendar
cloudHQ Powered by
cloudHQ



On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

View My Training Calendar
cloudHQ Powered by
cloudHQ


Re: Identify this part

Ian Townsend
 

The bottom part goes between the shaft nut and your prop (if it’s a fixed blade, not sure about folding). At least that’s where mine has always been. 

Ian & Margaret
Local Lola II
SM153

On Mar 14, 2020, at 9:57 AM, CW Bill Rouse <brouse@...> wrote:


Here is a photo of the part to ID:
<image.png>

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ

Re: Identify this part

amelforme
 

That’s the bolt and washer for the spare fixed pitch prop.

 

Joel     

 

       JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C.

                                           THE  EXPERIENCED AMEL GUY

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                   Office 954-462-5869  Cell 954-812-2485

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of CW Bill Rouse
Sent: Saturday, March 14, 2020 9:57 AM
To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] Identify this part

 

Here is a photo of the part to ID:

image.png

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

 

 

On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:

All,

 

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.

 

 

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

WiFi Extenders - best 2019-2020

martin haméline
 

Hola Amelians,

I am looking for current reviews on the best wifi extenders.......

I searched the user site files and couldn't find anything new or relevant.   Objective is to grab shore wifi while at anchor and work remotely with video calls, email etc... I know the quality depend on the source..

Appreciate your experience as I am looking to buy a system now.

Cheers,

Martin hAMELine
SV VoileOvent
Maramu # 129

Re: Floor board locks

Paul Osterberg
 

I hope I do not get the same experience as you. But will probably install floor lockers to be on the safe side
Paul SY Kerpa SM#259

Re: Identify this part

 

Here is a photo of the part to ID:
image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ

Re: Imperial seals in the Caribbean - onan water pump

 

Caraibe Marine in Martinique is an Onan dealer. 




CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 7:15 AM Patrick McAneny via Groups.Io <sailw32=aol.com@groups.io> wrote:
David, While in Le Marin last winter I had a new raw water pump shipped from an Onan dealer in Fla.,it took about a week to be shipped. I am sure you could have seals shipped as well. 
Good Luck ,
Pat
SM#123


-----Original Message-----
From: David Cummane via Groups.Io <davidcummane=mac.com@groups.io>
To: main <main@AmelYachtOwners.groups.io>
Sent: Sat, Mar 14, 2020 7:27 am
Subject: [AmelYachtOwners] Imperial seals in the Caribbean - onan water pump

I have a leak on the genset raw water pump and am in Guadeloupe.  Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre.  However am having more difficulty sourcing the seals as there are only metric sizes available here.

I have tried using the new shaft with the old seals but as expected not a very successful outcome.

Will hopefully be heading towards Antigua, BVI, Bahamas and onto the US, virus restrictions permitting.  Would be great to get hold
of the correct seals before I reach the US though.

Any suggestions welcome.

David
Ker Marie
SM#101

Identify this part

 

All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ

Re: Imperial seals in the Caribbean - onan water pump

Patrick McAneny
 

David, While in Le Marin last winter I had a new raw water pump shipped from an Onan dealer in Fla.,it took about a week to be shipped. I am sure you could have seals shipped as well. 
Good Luck ,
Pat
SM#123


-----Original Message-----
From: David Cummane via Groups.Io <davidcummane@...>
To: main <main@AmelYachtOwners.groups.io>
Sent: Sat, Mar 14, 2020 7:27 am
Subject: [AmelYachtOwners] Imperial seals in the Caribbean - onan water pump

I have a leak on the genset raw water pump and am in Guadeloupe.  Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre.  However am having more difficulty sourcing the seals as there are only metric sizes available here.

I have tried using the new shaft with the old seals but as expected not a very successful outcome.

Will hopefully be heading towards Antigua, BVI, Bahamas and onto the US, virus restrictions permitting.  Would be great to get hold
of the correct seals before I reach the US though.

Any suggestions welcome.

David
Ker Marie
SM#101

Imperial seals in the Caribbean - onan water pump

David Cummane
 

I have a leak on the genset raw water pump and am in Guadeloupe.  Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre.  However am having more difficulty sourcing the seals as there are only metric sizes available here.

I have tried using the new shaft with the old seals but as expected not a very successful outcome.

Will hopefully be heading towards Antigua, BVI, Bahamas and onto the US, virus restrictions permitting.  Would be great to get hold
of the correct seals before I reach the US though.

Any suggestions welcome.

David
Ker Marie
SM#101

Re: accidentally removed from forum - putting link to spare parts

 

Your first posting is automatically moderated. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Fri, Mar 13, 2020, 11:33 AM Alexandre Uster <uster@...> wrote:

I accidentally clicked on spam blocking myself from receiving email from the forum… and Bill just help me to get back in, now using a different email address, which is:  uster@...

I don’t think I can read any reply from my post on the old email address, so if could reply again using this one.

 

Just updated the share parts for sale, adding Diesel Fuel Stick, Safety Bars:

I will also regularly update/add my page:

http://nikimat.com/parts_for_sale/

 

Sincerely, Alexandre

accidentally removed from forum - putting link to spare parts

Alexandre Uster <uster@...>
 

I accidentally clicked on spam blocking myself from receiving email from the forum… and Bill just help me to get back in, now using a different email address, which is:  uster@...

I don’t think I can read any reply from my post on the old email address, so if could reply again using this one.

 

Just updated the share parts for sale, adding Diesel Fuel Stick, Safety Bars:

I will also regularly update/add my page:

http://nikimat.com/parts_for_sale/

 

Sincerely, Alexandre

Re: Cockpit Loud speakers

Gary Wells
 

I replaced ours with Fusion units as well.  While the current speaker covers are square I think you will find a round hole behind them.  
I did have to drill new screw holes, and the old ones are filled but still slightly visible.

They sound great :) 

Re: New Head which one

 

The old quiet flush base sometimes failed in 10-20 years. It was redesigned. There is not enough time to tell if it is better, but I believe it is. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Thu, Mar 12, 2020, 12:56 PM Paul Osterberg <osterberg.paul.l@...> wrote:
The base on our old head aft is broken beyond repair. Thought I replace it with a Jabsco quiet flush, however searching the forum I see that there have been issues with the weak base. Anyone have a better suggestion to substitute it with 
Paul on SY Kerpa SM#259 Lagos Portugal sykerpa.com