Date   

Re: Sea Chest

Thomas Kleman
 

Hey Mark, we seem to be working on the same project. My sea water manifold is corroded and I'm building a new one. 10 years ago I changed out the original Amel ball valve for one made of Marelon. At that time, I used the Amel fitting (1-1/4 threaded to 35 mm barbed). I'm now replacing everything to the left of that (which is the corroded copper fitting) and building it out of plastic components. Wondering if you can also salvage it (the Amel fitting) from your boat to save you this search.....the other option is to replace the ball valve with one of a size that fits a 1-3/8 barbed end......good luck. One bit of wisdom I've found. 1-3/8 hose is more common as a wet exhaust size than bilge/water so couplers might be found best by looking backwards with that in mind.

Thomas Kleman
SV L'ORIENT
SM 2K 422
Oahu


Re: Sea Chest

Mark Erdos
 

I heard back from US Plastics. This fitting is not one they make. Also, not available from Banjo or McMaster.  I am at a complete loss for this fitting. Any help would be greatly appreciated.

 

 

Plastic 1¼” male pipe thread to a 35mm ( or, 1 3/8”)  hose barb

 

image.png

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Mark Erdos via groups.io
Sent: Monday, October 12, 2020 6:00 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Sea Chest

 

Thanks Tom. I send them a note seems I can’t find it on their site.

 

I have also check the Banjo catalog and McMaster. Not much luck.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Thomas Kleman
Sent: Sunday, October 11, 2020 9:45 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Sea Chest

 

Mark- you might go with 1-3/8 for the 35mm side and try US Plastics. 


Re: If you missed Jimmy Cornell

 

That would be wonderful. I will see if he has time, but I suspect that he is tied up on his newest project.

Jimmy Cornell’s new project: Aventura Zero & the Elcano Challenge

To commemorate the 500th anniversary of the first round the world voyage, Jimmy Cornell is preparing to sail the historic route of the first circumnavigation achieved by Ferdinand Magellan and Juan Sebastian Elcano. Elcano took over the leadership of the expedition when Magellan was killed in the Philippines, and completed the voyage in 1522. In recognition of that fact, this project is called the Elcano Challenge (Desafío Elcano).

A further aim of this challenging voyage is to be the first circumnavigation completed by a fully electric boat, something that would be very much in tune with the current concern for the environment. Jimmy’s fifth boat, Aventura Zero, is the prototype of the new Outremer 4Zero catamaran with zero carbon dioxide footprint at the heart of the concept.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sun, Oct 11, 2020 at 5:50 PM JOHN HAYES <johnhayes862@...> wrote:

Many thanks for setting this up Bill and also to Tilo for putting it on UTube.

 

Wonder if at some point Jimmy might do a chapter  from Panama into the Pacific and beyond to the west

 

Best

 

John Hayes

Nga Waka

 

Wellington NZ

 

 

From: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of CW Bill Rouse <brouse@...>
Reply to: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Date: Monday, 12 October 2020 at 1:41 AM
To: "main@AmelYachtOwners.groups.io Notification" <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] If you missed Jimmy Cornell

 

The quality of your reception is based on your internet connection, and each of the participants. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

 

On Sun, Oct 11, 2020, 12:07 AM Harry and Mora Thompson via groups.io <HarryT1952=yahoo.com@groups.io> wrote:

Hi Bill

When I try to listen to it, the audio is broken up.

But thanks for taking the time to put it together. 

Harry

 



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:



The entire session is recorded here on YouTube: 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar


Re: If you missed Jimmy Cornell

Porter McRoberts
 

John. 
Great Question!!

Thanks


Porter McRoberts 
S/V IBIS A54-152 Moorea
WhatsApp:+1 754 265 2206
Www.fouribis.net

On Oct 11, 2020, at 12:50 PM, JOHN HAYES <johnhayes862@...> wrote:



Many thanks for setting this up Bill and also to Tilo for putting it on UTube.

 

Wonder if at some point Jimmy might do a chapter  from Panama into the Pacific and beyond to the west

 

Best

 

John Hayes

Nga Waka

 

Wellington NZ

 

 

From: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of CW Bill Rouse <brouse@...>
Reply to: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Date: Monday, 12 October 2020 at 1:41 AM
To: "main@AmelYachtOwners.groups.io Notification" <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] If you missed Jimmy Cornell

 

The quality of your reception is based on your internet connection, and each of the participants. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

 

On Sun, Oct 11, 2020, 12:07 AM Harry and Mora Thompson via groups.io <HarryT1952=yahoo.com@groups.io> wrote:

Hi Bill

When I try to listen to it, the audio is broken up.

But thanks for taking the time to put it together. 

Harry

 



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:



The entire session is recorded here on YouTube: 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar


Re: Sea Chest

Mark Erdos
 

Thanks Tom. I send them a note seems I can’t find it on their site.

 

I have also check the Banjo catalog and McMaster. Not much luck.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Thomas Kleman
Sent: Sunday, October 11, 2020 9:45 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Sea Chest

 

Mark- you might go with 1-3/8 for the 35mm side and try US Plastics. 


Re: Volvo fuel injector

ahmet kipcak
 

Thank you for responding to my query about the injector, it will be very helpfull to me.

Ahmet 




Philippe Belloir <pbelloir@...> şunları yazdı (11 Eki 2020 21:26):


You can have a look at the links above...

https://www.marinepartseurope.com/fr/e-volvo-penta-712-TAMD22P-B.aspx

https://www.volvopentashop.com/epc/fr-FR/Details/PentaPartsCatalog/7746710_019?path=MarineDieselEngines/7746710/7746710_23/7746710_019

Philippe Belloir  
+33 781 709 791


-------- Message d'origine --------
De : ahmet kipcak <ahmetkipcak@...>
Date : 11/10/2020 20:03 (GMT+01:00)
À : main@amelyachtowners.groups.io
Objet : [AmelYachtOwners] Volvo fuel injector



Hi everybady,
I am looking for Bosch fuel injector for my volvo TMD22 P (1999) engine. I need your advices to find a supplier for europe.
İnjectorModel :
2FH KBEL 68P67  200bar

Thanks for your support

Ahmet
SM247







<


Re: Maramu 1985 Jib Electric Furler

Philippe Belloir
 

I found as a reference only “NIREF” with a number 5, 10 ???

Perhaps NI for Nirvana

 

 

De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg Wala
Envoyé : lundi 12 octobre 2020 10:25
À : main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Objet : Re: [AmelYachtOwners] Maramu 1985 Jib Electric Furler

 

Thank you very much Philippe,

 

Do you know what brand of furler it is?

 

Thanks

Greg

 

On Mon, Oct 12, 2020 at 6:08 PM Philippe Belloir <pbelloir@...> wrote:

See the file attached

Best

Phil

 

De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg Wala
Envoyé : dimanche 11 octobre 2020 21:54
À : main@AmelYachtOwners.groups.io
Objet : [AmelYachtOwners] Maramu 1985 Jib Electric Furler

 

Hi, would anyone have the drawings for the Automatic Jib Furler from the 1985 era? I played around with the engage/disengage lever on the casing and now cannot get the gears to engage again no matter what position I try, would anyone have any advice on how to tackle this?


Re: Maramu 1985 Jib Electric Furler

Greg Wala
 

Thank you very much Philippe,

Do you know what brand of furler it is?

Thanks
Greg

On Mon, Oct 12, 2020 at 6:08 PM Philippe Belloir <pbelloir@...> wrote:

See the file attached

Best

Phil

 

De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg Wala
Envoyé : dimanche 11 octobre 2020 21:54
À : main@AmelYachtOwners.groups.io
Objet : [AmelYachtOwners] Maramu 1985 Jib Electric Furler

 

Hi, would anyone have the drawings for the Automatic Jib Furler from the 1985 era? I played around with the engage/disengage lever on the casing and now cannot get the gears to engage again no matter what position I try, would anyone have any advice on how to tackle this?


Re: Maramu 1985 Jib Electric Furler

Philippe Belloir
 

See the file attached

Best

Phil

 

De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg Wala
Envoyé : dimanche 11 octobre 2020 21:54
À : main@AmelYachtOwners.groups.io
Objet : [AmelYachtOwners] Maramu 1985 Jib Electric Furler

 

Hi, would anyone have the drawings for the Automatic Jib Furler from the 1985 era? I played around with the engage/disengage lever on the casing and now cannot get the gears to engage again no matter what position I try, would anyone have any advice on how to tackle this?


Re: If you missed Jimmy Cornell

JOHN HAYES
 

Many thanks for setting this up Bill and also to Tilo for putting it on UTube.

 

Wonder if at some point Jimmy might do a chapter  from Panama into the Pacific and beyond to the west

 

Best

 

John Hayes

Nga Waka

 

Wellington NZ

 

 

From: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of CW Bill Rouse <brouse@...>
Reply to: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Date: Monday, 12 October 2020 at 1:41 AM
To: "main@AmelYachtOwners.groups.io Notification" <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] If you missed Jimmy Cornell

 

The quality of your reception is based on your internet connection, and each of the participants. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

 

On Sun, Oct 11, 2020, 12:07 AM Harry and Mora Thompson via groups.io <HarryT1952=yahoo.com@groups.io> wrote:

Hi Bill

When I try to listen to it, the audio is broken up.

But thanks for taking the time to put it together. 

Harry

 



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:



The entire session is recorded here on YouTube: 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar


Maramu 1985 Jib Electric Furler

Greg Wala
 

Hi, would anyone have the drawings for the Automatic Jib Furler from the 1985 era? I played around with the engage/disengage lever on the casing and now cannot get the gears to engage again no matter what position I try, would anyone have any advice on how to tackle this?


Re: Sea Chest

Thomas Kleman
 

Mark- you might go with 1-3/8 for the 35mm side and try US Plastics. 


Re: Volvo fuel injector

Philippe Belloir
 

You can have a look at the links above...

https://www.marinepartseurope.com/fr/e-volvo-penta-712-TAMD22P-B.aspx

https://www.volvopentashop.com/epc/fr-FR/Details/PentaPartsCatalog/7746710_019?path=MarineDieselEngines/7746710/7746710_23/7746710_019

Philippe Belloir  
+33 781 709 791


-------- Message d'origine --------
De : ahmet kipcak <ahmetkipcak@...>
Date : 11/10/2020 20:03 (GMT+01:00)
À : main@amelyachtowners.groups.io
Objet : [AmelYachtOwners] Volvo fuel injector



Hi everybady,
I am looking for Bosch fuel injector for my volvo TMD22 P (1999) engine. I need your advices to find a supplier for europe.
İnjectorModel :
2FH KBEL 68P67  200bar

Thanks for your support

Ahmet
SM247







<


Re: Volvo fuel injector

Alexandre Uster von Baar
 

Hello Ahme, 

I have 4 injectors.  
But they are in Sint Maarten and I am stuck in France. 
Should be able to be back in Nov.  


I purchased mine as spare from Diesel Services of America (I don’t recommend that company) but the Volvo part is 3581135 (for the TMD 22 P) - many mistakes are made with these injectors - mine are correct. 

http://www.nikimat.com/factures/2015_03_15_diesel_of_america_spare_injector.jpg


Since you have the TMD 22 P here is a list of the other parts I have (just in case). 

http://supermaramu2000.com/parts_for_sale/volvo_tmd_22_p.html


Sincerely, Alexandre





On Sunday, October 11, 2020, 01:03:15 PM CDT, ahmet kipcak <ahmetkipcak@...> wrote:




Hi everybady,
I am looking for Bosch fuel injector for my volvo TMD22 P (1999) engine. I need your advices to find a supplier for europe.
İnjectorModel :
2FH KBEL 68P67  200bar

Thanks for your support

Ahmet
SM247








Re: Volvo fuel injector

Slavko Despotovic
 

Hi,

try this site https://www.marinepartseurope.com
I have used them in the past and are ok.


regards,

Slavko
SM2000 #297


Volvo fuel injector

ahmet kipcak
 

Hi everybady,
I am looking for Bosch fuel injector for my volvo TMD22 P (1999) engine. I need your advices to find a supplier for europe.
İnjectorModel :
2FH KBEL 68P67 200bar

Thanks for your support

Ahmet
SM247


Re: If you missed Jimmy Cornell

Scott Brown
 

Great presentation last night from Jimmy - many thanks Bill and Tilo for organising this, it was my favourite one to date.

Best wishes,

Scott

On 11 Oct 2020, at 13:47, Tilo Peters <tilo.peters@...> wrote:

I’ve uploaded a direct recording of the Zoom meeting and added subtitles to it so it should enable you to follow along even if your audio doesn’t keep up.

Here’s the link: https://youtu.be/ir4GjSffqQU

Best,

Tilo

On 11Oct, 2020, at 07:07, Harry and Mora Thompson via groups.io <HarryT1952@...> wrote:

Hi Bill
When I try to listen to it, the audio is broken up.
But thanks for taking the time to put it together. 
Harry



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:


The entire session is recorded here on YouTube: 
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar



Re: If you missed Jimmy Cornell

Tilo Peters
 

I’ve uploaded a direct recording of the Zoom meeting and added subtitles to it so it should enable you to follow along even if your audio doesn’t keep up.

Here’s the link: https://youtu.be/ir4GjSffqQU

Best,

Tilo

On 11Oct, 2020, at 07:07, Harry and Mora Thompson via groups.io <HarryT1952@...> wrote:

Hi Bill
When I try to listen to it, the audio is broken up.
But thanks for taking the time to put it together. 
Harry



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:


The entire session is recorded here on YouTube: 
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


Re: If you missed Jimmy Cornell

 

The quality of your reception is based on your internet connection, and each of the participants. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Sun, Oct 11, 2020, 12:07 AM Harry and Mora Thompson via groups.io <HarryT1952=yahoo.com@groups.io> wrote:
Hi Bill
When I try to listen to it, the audio is broken up.
But thanks for taking the time to put it together. 
Harry



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:


The entire session is recorded here on YouTube: 
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


Re: If you missed Jimmy Cornell

Harry and Mora Thompson
 

Hi Bill
When I try to listen to it, the audio is broken up.
But thanks for taking the time to put it together. 
Harry



On Oct 10, 2020, at 3:38 PM, CW Bill Rouse <brouse@...> wrote:


The entire session is recorded here on YouTube: 
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

1381 - 1400 of 56134