Date   

Jordan Drogue

eric freedman
 

Hi,

With respect to the Jordan Drogue it is now available in spectra—that is the way to go. It was originally developed by Don Jordan and manufactured by Dave Pelissier of Ace Sailmakers in Connecticut—I would order it from him  and only him.

There are many people now selling the drogue and a few that I have seen are shoddy.

 

If you are feeling really nautical you can buy the kit from him with pre-assembled cones and weave it together yourself.  If you do not get it from Ace, Make sure that the forward facing edge of the cones have seams on them otherwise they will shred after many hours in the water. See above photo.

 

 

When I had Kimberlite built I had Amel Super reinforce the stern cleats. At the end of my bridles I also have large loops spliced into them.

To keep from putting strain on one back stay (you only will have to adjust one leg)  I had a machine shop make me a titanium Humongous snatch block for 1 ½ inch line. Which I will fasten to a few places on the deck fittings to square the boat to the waves.

 

You might also want to have the vinyl covering for the cockpit (weather cloths) zippers modified. I had my sailmaker put loops on either side of the zipper every foot and a half so if the zipper starts coming apart you can tie it back together.

 

When bringing in the drogue you will need something bolted to the stern chocks as the drogue wants to get caught on it and tear the cones.

The drogue has to be tailed by hand as it is  too big for the winch.

Careful not to tear the cones on the winch line stripper.

 

Lastly, the winch motor will cut out after about 4 minutes due to thermal overload. Either bring in the drogue a bit, wait for the motor to cool off and proceed or wait till the overload device trips and then wait 5 minutes and it will work again.

 

I hope it never leaves your port locker.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

From: carpathia3 via groups.io [mailto:carpathia3@...]
Sent: Wednesday, February 27, 2019 10:23 AM
To: eric freedman
Subject: Private: Re: [AmelYachtOwners] Gearbox greasing

 

Hi Eric,

Thank you for your response, very clear! And yes, I would like to attend to the shaft as well... Just not sure I will be able to take it out. I may have to construct a tool like Jose's to remove it. Mine has probably never been serviced in 19 years so I expect the worst...

I know you are also a big fan of the Jordan drogue and I am quite interested in having one on Carpathia. Can I ask you for your latest advice on how to fit it well with the backstays, and what you found the best setup on the SM. Any picture would help too...

Many thanks,

Guillaume

 


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Ian Townsend
 

We applied Brightside Hatteras White in late 2017. 

What we learned. 
1. We love the color and the match is very good. It's one of those things that really revitalizes the look of the SM, helping to defy its age.
2. We could not get the pinstripe tool to perform as advertised, despite watching video, experimenting and using varying amounts of thickening agent. Over time, we developed our own method to avoid sloppy lines. You'll also need artist brushes as there several areas the tool cannot reach.
3. We used less than a quart of Brightside for one coat.
4. It took about 60 hours for the first coat. WeAs Joel says, it takes patience and my wife definitely had more than me.
5. Not a lot of difference underfoot in terms of 'cooler' decks.
6. It's been on for only 15 months and thus far we've only put on one coat (like Mark says, we opt for fun!). Can't predict how long it will last but it's wearing well so far. Eventually we will get around to that second coat!

Note that we spend most of our time in Florida and the Bahamas.

Good luck!

Ian & Margaret
S/V Loca Lola II 
SM153
Exumas, Bahamas

On Feb 27, 2019, at 11:12 AM, Gary Silver via Groups.Io <garysilver@...> wrote:

[Edited Message Follows]

Hi Bill and all:

I am preparing to re-paint my deck stripes "AGAIN".  This will be my third time (have owned the boat since new in 2001).  I previously used Interlux Brightside paint and it just does not hold up to Caribbean sun.  About 4-5 years before it oxidizes and starts to look shabby.  I am considering using Awlgrip this go round but it will be much more work and I am investigating the "pot life" (i.e. useful working time) to see if it is practical to use in the pin-striping tool. 

I would appreciate any feedback on the durability of the various types of paint and also others thoughts about the cosmetics of switching to the cream color for the stripes.  Changing things on Liahona is a heavy lift for me, yet that said, having just changed the boot-stripe to Desert Sand has been a great change that improved the appearance of the boat both to myself and many others who have commented on the appearance.  Wise advice to me a long time ago was, "never be the first to adopt a change and never be the last".  

Opinions and experiences of all types are invited. 

Gary S Silver
s/v Liahona
Amel SM 2000 #335
lying Puerto Del Rey marina, Puerto Rico


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Craig Briggs
 

Mark,
Uh, have you thought about where you may be sleeping tonight?
Craig SN68 Sangaris


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Mark Erdos
 

Joel,

 

Oh good to know!!! I adding this to Cindy’s list J

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Santa Marta, Colombia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of amelforme
Sent: Wednesday, February 27, 2019 5:51 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

 

The original stripes are polyester resin/gel- coat. They were painstakingly applied by hand with paint brushes. Throughout the production of the Sharki, Maramu, Mango, Fango, Santorin and Super Maramu, these stipes were applied by a mainly female crew who were deemed to have more patience and manual dexterity than their male counterparts. These were considered the primary requirements for this job. Back then, political correctness wasn’t even a consideration, especially in France.

 

All The Best, Joel

 

          JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C.

                                           THE  EXPERIENCED AMEL GUY

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                   Office 954-462-5869  Cell 954-812-2485

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Mark Erdos
Sent: Wednesday, February 27, 2019 1:48 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

 

Were the original stripes done with gelcoat or resin?

 

Cream Puff needs this too but it keeps getting pushed back down the project list because “having fun” trumps it every time. It has been on the list since we purchase here in 2011 J

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Santa Marta, Colombia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Gary Silver via Groups.Io
Sent: Wednesday, February 27, 2019 12:13 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

 

[Edited Message Follows]

Hi Bill and all:

I am preparing to re-paint my deck stripes "AGAIN".  This will be my third time (have owned the boat since new in 2001).  I previously used Interlux Brightside paint and it just does not hold up to Caribbean sun.  About 4-5 years before it oxidizes and starts to look shabby.  I am considering using Awlgrip this go round but it will be much more work and I am investigating the "pot life" (i.e. useful working time) to see if it is practical to use in the pin-striping tool. 

I would appreciate any feedback on the durability of the various types of paint and also others thoughts about the cosmetics of switching to the cream color for the stripes.  Changing things on Liahona is a heavy lift for me, yet that said, having just changed the boot-stripe to Desert Sand has been a great change that improved the appearance of the boat both to myself and many others who have commented on the appearance.  Wise advice to me a long time ago was, "never be the first to adopt a change and never be the last".  

Opinions and experiences of all types are invited. 

Gary S Silver
s/v Liahona
Amel SM 2000 #335
lying Puerto Del Rey marina, Puerto Rico


Re: Amel 54 Manual - Owner and User

Dean Gillies
 

Whilst on this topic ... what I would really like to get is a soft copy of the A54 Manual Appendices in English.

My original hard copy of the manuals is in German for the original owner. I don’t read German very well.

I have soft copies of the English Manuals, but not the Appendices.

If anyone has a soft copy of the appendices I’d love to receive a copy.

In the meantime, I notice there are no English manuals in the folder that Roque has provided, so I’ll try to fix that 😎

Cheers
Dean
SY Stella
A54-154

Sent from my iPhone X


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

amelforme
 

The original stripes are polyester resin/gel- coat. They were painstakingly applied by hand with paint brushes. Throughout the production of the Sharki, Maramu, Mango, Fango, Santorin and Super Maramu, these stipes were applied by a mainly female crew who were deemed to have more patience and manual dexterity than their male counterparts. These were considered the primary requirements for this job. Back then, political correctness wasn’t even a consideration, especially in France.

 

All The Best, Joel

 

          JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C.

                                           THE  EXPERIENCED AMEL GUY

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                   Office 954-462-5869  Cell 954-812-2485

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Mark Erdos
Sent: Wednesday, February 27, 2019 1:48 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

 

Were the original stripes done with gelcoat or resin?

 

Cream Puff needs this too but it keeps getting pushed back down the project list because “having fun” trumps it every time. It has been on the list since we purchase here in 2011 J

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Santa Marta, Colombia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Gary Silver via Groups.Io
Sent: Wednesday, February 27, 2019 12:13 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

 

[Edited Message Follows]

Hi Bill and all:

I am preparing to re-paint my deck stripes "AGAIN".  This will be my third time (have owned the boat since new in 2001).  I previously used Interlux Brightside paint and it just does not hold up to Caribbean sun.  About 4-5 years before it oxidizes and starts to look shabby.  I am considering using Awlgrip this go round but it will be much more work and I am investigating the "pot life" (i.e. useful working time) to see if it is practical to use in the pin-striping tool. 

I would appreciate any feedback on the durability of the various types of paint and also others thoughts about the cosmetics of switching to the cream color for the stripes.  Changing things on Liahona is a heavy lift for me, yet that said, having just changed the boot-stripe to Desert Sand has been a great change that improved the appearance of the boat both to myself and many others who have commented on the appearance.  Wise advice to me a long time ago was, "never be the first to adopt a change and never be the last".  

Opinions and experiences of all types are invited. 

Gary S Silver
s/v Liahona
Amel SM 2000 #335
lying Puerto Del Rey marina, Puerto Rico


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Germain Jean-Pierre
 

Hi Barry and Robyn,

AFAIK, Steve (Aloha) is the only SM to have done this.  We know his boat and we can assure you it looks and feel great underfoot.

However, if you wait until Steve sees this post, I’m certain he’ll chime in with his 2 year long experience.

Cheers,


Jean-Pierre Germain, SY Eleuthera, SM 007



On 28 Feb 2019, at 10:27, seagasm <seagasm@...> wrote:

I too have a couple of questions, who have used the slip resistant deck paint product and if you have, how have you found cleaning the deck from dust, salt or even spills from fish cleaning. There are a couple of products here in Australia, Norglass and AWLGrip worth consideration however, their options do offer non-slip or otherwise.

Best Regards
Barry & Robyn
Tradewinds III SM#171


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

seagasm <seagasm@...>
 

I too have a couple of questions, who have used the slip resistant deck paint product and if you have, how have you found cleaning the deck from dust, salt or even spills from fish cleaning. There are a couple of products here in Australia, Norglass and AWLGrip worth consideration however, their options do offer non-slip or otherwise.

Best Regards
Barry & Robyn
Tradewinds III SM#171


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Germain Jean-Pierre
 

Hi Gary,  

I did my deck stripes in white: makes deck somewhat cooler underfoot, reduces heat down below too.  

However, mine being an old girl, I’ll grind down the entire deck to make it level with the bottom of the stripes, then an epoxy coat in white with an anti slip on the top.  Just as Steve Davis did on Aloha.  It is gorgeous.

(Disclaimer:  I’ll pay a yard in Malaysia to do the work)

:-)


Jean-Pierre Germain, SY Eleuthera, SM007



On 28 Feb 2019, at 05:12, Gary Silver via Groups.Io <garysilver@...> wrote:

Hi Bill and all:

I am preparing to re-paint my deck stripes "AGAIN".  This will be my third time (have owned the boat since new in 2001).  I previously used Brightside Perfection paint and it just does not hold up to Caribbean sun.  About 4-5 years before it oxidizes and starts to look shabby.  I am considering using Awlgrip this go round but it will be much more work and I am investigating the "pot life" (i.e. useful working time) to see if it is practical to use in the pin-striping tool. 

I would appreciate any feedback on the durability of the various types of paint and also others thoughts about the cosmetics of switching to the cream color for the stripes.  Changing things on Liahona is a heavy lift for me, yet that said, having just changed the boot-stripe to Desert Sand has been a great change that improved the appearance of the boat both to myself and many others who have commented on the appearance.  Wise advice to me a long time ago was, "never be the first to adopt a change and never be the last".  

Opinions and experiences of all types are invited. 

Gary S Silver
s/v Liahona
Amel SM 2000 #335
lying Puerto Del Rey marina, Puerto Rico


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Mark Erdos
 

Were the original stripes done with gelcoat or resin?

 

Cream Puff needs this too but it keeps getting pushed back down the project list because “having fun” trumps it every time. It has been on the list since we purchase here in 2011 J

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Santa Marta, Colombia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Gary Silver via Groups.Io
Sent: Wednesday, February 27, 2019 12:13 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

 

[Edited Message Follows]

Hi Bill and all:

I am preparing to re-paint my deck stripes "AGAIN".  This will be my third time (have owned the boat since new in 2001).  I previously used Interlux Brightside paint and it just does not hold up to Caribbean sun.  About 4-5 years before it oxidizes and starts to look shabby.  I am considering using Awlgrip this go round but it will be much more work and I am investigating the "pot life" (i.e. useful working time) to see if it is practical to use in the pin-striping tool. 

I would appreciate any feedback on the durability of the various types of paint and also others thoughts about the cosmetics of switching to the cream color for the stripes.  Changing things on Liahona is a heavy lift for me, yet that said, having just changed the boot-stripe to Desert Sand has been a great change that improved the appearance of the boat both to myself and many others who have commented on the appearance.  Wise advice to me a long time ago was, "never be the first to adopt a change and never be the last".  

Opinions and experiences of all types are invited. 

Gary S Silver
s/v Liahona
Amel SM 2000 #335
lying Puerto Del Rey marina, Puerto Rico


Re: [Amel Yacht Owners] Painting deck stripes - how much paint is needed??

Gary Silver
 
Edited

Hi Bill and all:

I am preparing to re-paint my deck stripes "AGAIN".  This will be my third time (have owned the boat since new in 2001).  I previously used Interlux Brightside paint and it just does not hold up to Caribbean sun.  About 4-5 years before it oxidizes and starts to look shabby.  I am considering using Awlgrip this go round but it will be much more work and I am investigating the "pot life" (i.e. useful working time) to see if it is practical to use in the pin-striping tool. 

I would appreciate any feedback on the durability of the various types of paint and also others thoughts about the cosmetics of switching to the cream color for the stripes.  Changing things on Liahona is a heavy lift for me, yet that said, having just changed the boot-stripe to Desert Sand has been a great change that improved the appearance of the boat both to myself and many others who have commented on the appearance.  Wise advice to me a long time ago was, "never be the first to adopt a change and never be the last".  

Opinions and experiences of all types are invited. 

Gary S Silver
s/v Liahona
Amel SM 2000 #335
lying Puerto Del Rey marina, Puerto Rico


Re: New file uploaded to main@AmelYachtOwners.groups.io

 

Thanks, Gary...this is very complete.

I will upload the Amel 54 information to the files section.

Best,

Bill Rouse
720 Winnie St.
Galveston, Texas 77550
832-380-4970



On Wed, Feb 27, 2019 at 8:07 AM main@AmelYachtOwners.groups.io Notification <main+notification@amelyachtowners.groups.io> wrote:

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group.

File: SM Goiot Hatch Specifications : Sizes: Lens and Replacement Parts.pdf

Uploaded By:

Description:
SM Goiot Hatch Specifications / Replacement Parts for lens', source for replacement parts in the USA etc.

You can access this file at the URL:
https://AmelYachtOwners.groups.io/g/main/files/Goiot%20Hatch%20Specifications%20%20Part%20Numbers%20%20Replacement%20Parts%20etc/./SM%20Goiot%20Hatch%20Specifications%20:%20Sizes:%20Lens%20and%20Replacement%20Parts.pdf

Cheers,
The Groups.io Team


New file uploaded to main@AmelYachtOwners.groups.io

main@AmelYachtOwners.groups.io Notification <main+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group.

File: SM Goiot Hatch Specifications : Sizes: Lens and Replacement Parts.pdf

Uploaded By:

Description:
SM Goiot Hatch Specifications / Replacement Parts for lens', source for replacement parts in the USA etc.

You can access this file at the URL:
https://AmelYachtOwners.groups.io/g/main/files/Goiot%20Hatch%20Specifications%20%20Part%20Numbers%20%20Replacement%20Parts%20etc/./SM%20Goiot%20Hatch%20Specifications%20:%20Sizes:%20Lens%20and%20Replacement%20Parts.pdf

Cheers,
The Groups.io Team


Re: Engine Repower for Super Maramu

Davi Rozgonyi
 

That is an incredible amount of money,and as the others say, I'd RUN elsewhere. And probably name and shame, but that's just me; I'm a vindictive little snot :)

We have a 1991 SM which we just repowered in Mallorca. Had a few engine choices, but ended up taking the original Perkins Prima M80T and reboring it (first oversize) and refurbishing it with everything new (like the turbo) or reconditioned/tested that was still fine. We did this because after a lot of research, for the value and ease of working on it anywhere in the world, and the lack of electronics and common rail problems of the newer engines (esp the volvo D3), the Prima seemed like it can't be beat (as long as you have a good one to start from). Total cost, about 8000 euros, installed. 

And yes, what the others say, the older C drives aren't made to take 110 horses. Ours was replaced with one that could, but still didn't go up to the yanmar because of price and need....the prima is plenty for this boat in my opinion.


Re: Engine Repower for Super Maramu

eric freedman
 

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of eric freedman
Sent: Tuesday, February 26, 2019 10:37 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Engine Repower for Super Maramu

 

I cannot speak for the 4jh4hte  - just the 4jh3hte.

Getting the components is easy, If you have a 175 amp alternator it is already isolated.

 

The time to change over the engine to an isolated ground should take less than a day if is wired similarly to the 4jh3hte.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of karkauai via Groups.Io
Sent: Tuesday, February 26, 2019 12:16 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Engine Repower for Super Maramu

 

Yes, Bill.  110 HP 4JH4HTE.  It was hard to find a mechanic/electrician who understood the issue.  I posted a schematic in the files section of the way it is done.

Kent

SM 243

Kristy

 

 


On Feb 26, 2019, at 10:11 AM, Dan Wilcox via Groups.Io <dwilcox123@...> wrote:

it can  be modified, but is a lot of work... or you can order an isolated version still.

 

thanks, Dan

Feierabend #86

 

On Tue, Feb 26, 2019 at 7:45 AM, Bill Kinney via Groups.Io

For those of you who installed Yanmar engines, were they able to modify their standard engine to use an isolated ground return?

Bill Kinney
SM160, Harmonie 
Underway from Georgetown to Acklins Is., Bahamas


Re: Engine Repower for Super Maramu

eric freedman
 

I cannot speak for the 4jh4hte  - just the 4jh3hte.

Getting the components is easy, If you have a 175 amp alternator it is already isolated.

 

The time to change over the engine to an isolated ground should take less than a day if is wired similarly to the 4jh3hte.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of karkauai via Groups.Io
Sent: Tuesday, February 26, 2019 12:16 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Engine Repower for Super Maramu

 

Yes, Bill.  110 HP 4JH4HTE.  It was hard to find a mechanic/electrician who understood the issue.  I posted a schematic in the files section of the way it is done.

Kent

SM 243

Kristy

 

 


On Feb 26, 2019, at 10:11 AM, Dan Wilcox via Groups.Io <dwilcox123@...> wrote:

it can  be modified, but is a lot of work... or you can order an isolated version still.

 

thanks, Dan

Feierabend #86

 

On Tue, Feb 26, 2019 at 7:45 AM, Bill Kinney via Groups.Io

For those of you who installed Yanmar engines, were they able to modify their standard engine to use an isolated ground return?

Bill Kinney
SM160, Harmonie 
Underway from Georgetown to Acklins Is., Bahamas


Re: From Raymarine Time change on GPS satellite constellation worldwide

eric freedman
 

Hi Bill,

Kimberlite is 100% Raymarine and my GPS is not listed on their no problem list.

I am well aware how the gps units function , however I am mostly concerned about a sequential progression of problems following the date change.

Fair Winds

Eric

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, February 26, 2019 2:53 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] From Raymarine Time change on GPS satellite constellation worldwide

 

Eric,

 

I believe you are mostly correct, but let me add something.

 

Your boat's GPS position is based on the elapsed time for a signal to be received from the satellite by your GPS normally utilizing 3 or more satellites that fall in line-of-sight to your boat. Longitude is based on time, but has no impact on the calculation performed in a Furuno GPS. 

 

The error that was experienced during the last rollover had to do with the "year calculation," but not the difference in signal travel time. I saw a Furuno GP80 (very common on SMs) operating perfectly, but with the wrong year associated with the date and time. I saw another GP80 working perfectly with the correct year. The difference was because of the manufacturing date by Furuno. The later made Furuno had been modified, and this modification compensated for the year issue. The later model Furuno was made in 2002. I certainly do not what will happen with other brands.

 

I am going to guess that any GPS made after about 2000 will be fine, and if it isn't 100% correct, this situation may only affect the year posted on the screen.

 

Best,

 

Bill Rouse

720 Winnie St.

Galveston, Texas 77550

832-380-4970

 

 

On Tue, Feb 26, 2019 at 1:33 PM eric freedman <kimberlite@...> wrote:

The last rollover was 20 years ago. Almost all Kimberlite Amel Super Maramu’s will be affected in some way with original equipment.

I wrote Raymarine and they are still analyzing what the affect will be with  respect to long lat as it is based upon time.

The Raymarine list does not list the older units, it will also affect in some way gmpcs.

 

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, February 26, 2019 8:58 AM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] From Raymarine Time change on GPS satellite constellation worldwide

 

The world is not ending as forums like Cruiser's Forum would lead you to believe.

 

I believe that it will only affect GPSs that were manufactured before the last rollover. AND, it will only affect the time/year on the screen of the GPS.

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

 

On Mon, Feb 25, 2019, 9:28 PM eric freedman <kimberlite@...> wrote:

 

http://forum.raymarine.com/showthread.php?tid=7453

 

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of eric freedman
Sent: Monday, February 25, 2019 10:17 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Time change on GPS satellite constellation worldwide

 

I found this article

 

https://www.spirent.com/blogs/positioning/2018/january/gps-rollover-week

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of eric freedman
Sent: Monday, February 25, 2019 9:38 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Time change on GPS satellite constellation worldwide

 

I heard that every 20 years the time is adjusted in the GPS satellite constellation.

I also heard that the adjustment will occur in April this year and might affect our GPS units and navigation items.

Has anyone else heard about this?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 


Re: Time change on GPS satellite constellation worldwide

Gary Wells
 

I haven't really investigated this just yet.  I'm hoping, as mentioned, that the older equipment will experience a minimum, non-navigational impact.  
Also, it's possible that a firmwarue updatecould fix it as well.  


Re: Amel 54 Manual - Owner and User

Mark McGovern
 

I think it should be fine to upload those files.  We are currently utilizing 361MB of our allotted 10GB of File Storage space.  That 361MB is the sum total of all the files that every member has ever uploaded since 2001!  So it has taken 18 years to consume 3.6% of our allocated storage space.  Given that, I think it will be OK to upload them despite their large size.  If in the future file storage space becomes an issue, we can re-evaluate.

--
Mark McGovern
SM #440 Cara
Deale, MD USA


Amel 54 Manual - Owner and User

Roque
 

Hi

I just uploaded, in the files section, an “Amel 54 Manual” set (Owner, User and Options) in Italian. I also have the versions in German, French, Spanish and Portuguese.

I uploaded just this one to test. Each language set is around 80 MB. So I ask the moderators: is it ok to upload the other languages, considering the size? 


Also important, is anyone interested in any of these sets?


Roque

Attika   A54 #117

Paraty- Rio de Janeiro

14661 - 14680 of 59139