Date   
Re: [Amel Yacht Owners] For sale?

eric freedman
 

Mohammed,

Did you also buy the tools needed to rebuild the prop?

AB marine rented me the tools for about $50,

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Tuesday, January 16, 2018 4:19 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] For sale?

 

 

Hi everyone;

 

FYI, the pricing I received from Brunton direct in England was much better than the one received from the US distributor on the east coast. I ordered a complete rebuild kit plus misc other parts. The shipping was reasonable and quick. Very nice helpful people.

 

Respectfully;

Mohammad and Aty

B&B Kokomo

Amel 54 #099

 

 


From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Tuesday, January 16, 2018 12:21 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] For sale?

 

Jim, 

 

I have a client located near you that is looking for a SM.

 

My fees are paid by my clients and I am not a broker. 

 

Let me know.


Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

 

On Apr 22, 2017 14:25, "capt.anderson@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

In case my original post was unclear:
If you want to buy a plastic cap fro your Autoprop you can get it here:

King Propulsion, Virgina Beach, Virginia, USA tel. +1 757 962 9219


kingpropulsion dot com
roderick.sampson"at"kingpropulsion"dot"com
About $36.00 US plus shipping for the H-6 Autoprop plastic cap with fasteners

By way of further information, both King Propulsion in Virginia, USA and AB Marine in Rhode Island, USA are authorized Brunton's distributors. When I called AB Marine I was told the plastic cap was unavailable and the zinc cap was about $40.00 US plus shipping. When I called King Propulsion I was told that they would get me the plastic cap right away and ship it in a few days, and that if I wanted a zinc cap I should just order it from boatzincs"dot"com for under $20.00US because if I they sold it to me they would have to charge me about double that amount.

Jim
SM384 Sirena Azul
Seat tle

 

Re: [Amel Yacht Owners] Measurement of 1 interior panel of window covering.

James Studdart
 

Hello,
Our saloon window curtains are 85cm x 33cm. Is that what you needed?

Cheers,
James.
SeaBean SM344
Moorea, FP

On Tue, Jan 16, 2018 at 04:02 Stephanie DiBelardino stephiedib@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Could someone measure 1 panel of a SM window “curtain”either in inches or cm’s? I eyeballed an overall yardage, assuming a 60 cm horizontal repeat, before we left the US. But I found a fabric here in Italy that I may need less of!

BTW, we visited the Amel factory in La Rochelle last week. Very impressive and gave me even greater respect for the quality workmanship that goes into an Amel. Currently, there are 3 models that Amel is producing: 50, 55, & 64. Evidently, Amel only wants to produce 2 models. They hope that the 50 makes a great splash at the Dusseldorf Boat Show. It is a very comfortable boat that measures 6 meters at the beam!

The new designer (last 3 years) has dramatically changed the exterior and the boat lines are sleeker. Not even a rub rail!

Many thanks,
Stephanie
SM353 Indecent


Re: [Amel Yacht Owners] For sale?

Duncan Hagemeyer
 

Bill, my Amel 54 is for sale by McMichael's Brokerage, Agents for Amel in NA.  (Cameron Campbell, broker).  The boat is in Antigua. I have an agent the works for me in Antigua and I can hook you guys up.  Lightly used and came thru the hurricanes without any issues.  Cameron will give you all the info.

Duncan 

On Tue, Jan 16, 2018 at 1:20 PM, Bill Rouse brouse@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Jim, 

I have a client located near you that is looking for a SM.

My fees are paid by my clients and I am not a broker. 

Let me know.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Apr 22, 2017 14:25, "capt.anderson@... [amelyachtowners]" <amelyachtowners@yahoogroups.com> wrote:
 

In case my original post was unclear:
If you want to buy a plastic cap fro your Autoprop you can get it here:

King Propulsion, Virgina Beach, Virginia, USA tel. +1 757 962 9219


kingpropulsion dot com
roderick.sampson"at"kingpropulsion"dot"com
About $36.00 US plus shipping for the H-6 Autoprop plastic cap with fasteners

By way of further information, both King Propulsion in Virginia, USA and AB Marine in Rhode Island, USA are authorized Brunton's distributors. When I called AB Marine I was told the plastic cap was unavailable and the zinc cap was about $40.00 US plus shipping. When I called King Propulsion I was told that they would get me the plastic cap right away and ship it in a few days, and that if I wanted a zinc cap I should just order it from boatzincs"dot"com for under $20.00US because if I they sold it to me they would have to charge me about double that amount.

Jim
SM384 Sirena Azul
Seat tle





--
Duncan Hagemeyer
24 Rock Creek Road
Emigrant, MT  59027

1-615-478-6006

1-406-848-9866  Ashling Ranch

Re: [Amel Yacht Owners] For sale?

Mohammad Shirloo
 

Hi everyone;
 
FYI, the pricing I received from Brunton direct in England was much better than the one received from the US distributor on the east coast. I ordered a complete rebuild kit plus misc other parts. The shipping was reasonable and quick. Very nice helpful people.
 
Respectfully;
Mohammad and Aty
B&B Kokomo
Amel 54 #099
 


From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Tuesday, January 16, 2018 12:21 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] For sale?

 

Jim, 

I have a client located near you that is looking for a SM.

My fees are paid by my clients and I am not a broker. 

Let me know.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Apr 22, 2017 14:25, "capt.anderson@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

In case my original post was unclear:
If you want to buy a plastic cap fro your Autoprop you can get it here:

King Propulsion, Virgina Beach, Virginia, USA tel. +1 757 962 9219


kingpropulsion dot com
roderick.sampson"at"kingpropulsion"dot"com
About $36.00 US plus shipping for the H-6 Autoprop plastic cap with fasteners

By way of further information, both King Propulsion in Virginia, USA and AB Marine in Rhode Island, USA are authorized Brunton's distributors. When I called AB Marine I was told the plastic cap was unavailable and the zinc cap was about $40.00 US plus shipping. When I called King Propulsion I was told that they would get me the plastic cap right away and ship it in a few days, and that if I wanted a zinc cap I should just order it from boatzincs"dot"com for under $20.00US because if I they sold it to me they would have to charge me about double that amount.

Jim
SM384 Sirena Azul
Seat tle


Re: Boatshow Dűsseldorf Germanny

eamonn.washington@...
 

Hi Wolfgang

I will be there on the 24th and 25th.

Regards
Eamonn Washington
Travel Bug
SM 151

Measurement of 1 interior panel of window covering.

Stephanie DiBelardino <stephiedib@...>
 

Could someone measure 1 panel of a SM window “curtain”either in inches or cm’s? I eyeballed an overall yardage, assuming a 60 cm horizontal repeat, before we left the US. But I found a fabric here in Italy that I may need less of!

BTW, we visited the Amel factory in La Rochelle last week. Very impressive and gave me even greater respect for the quality workmanship that goes into an Amel. Currently, there are 3 models that Amel is producing: 50, 55, & 64. Evidently, Amel only wants to produce 2 models. They hope that the 50 makes a great splash at the Dusseldorf Boat Show. It is a very comfortable boat that measures 6 meters at the beam!

The new designer (last 3 years) has dramatically changed the exterior and the boat lines are sleeker. Not even a rub rail!

Many thanks,
Stephanie
SM353 Indecent

Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

James Alton
 

Bill,

   If you can give me an estimate of the head that the Sealand would be pumping against and I will find some time to test my Sealand T2 pump for you.   My impression of the pump is that the motor is quite strong for the size of the pump so I don’t think that the flow falls off as fast as with some of the other pumps but it will be interesting to find out!

James
SV Sueño
Maramu #220

On Jan 15, 2018, at 11:01 PM, greatketch@... [amelyachtowners] <amelyachtowners@...> wrote:

Have you had a chance to flow test it yet? My Amel OEM pump pumps about 50% of its rated flow as installed...  I am wondering if you see the same thing with the Sealand pump?


Bill Kinney
sm160 Harmonie
Grand Bahama Is.


Re: [Amel Yacht Owners] Water maker electric motor removal

Jean-Pierre's MacBook Air <jgermain@...>
 

Hello Patrick,

The Dessalator man is Martijn de Jong.  His email is spain@....

His phone number is +34 637 890 333‬


Jean-Pierre Germain
SY Eleuthera, SM 007
Panama.



On 16 Jan 2018, at 06:59, pjn.mccallin@... [amelyachtowners] <amelyachtowners@...> wrote:

Thank you for info, will you please clarify email address so I can contact him to ask for assistance?

Thanks in anticipation Patrick Caramelle.


Re: [Amel Yacht Owners] Water maker electric motor removal

pjn.mccallin@...
 

Thank you for info, will you please clarify email address so I can contact him to ask for assistance?
Thanks in anticipation Patrick Caramelle.

Re: [Amel Yacht Owners] Seafood party in Martinique

James Cromie
 

Jeff - Thank you fo hosting the party last night - and for sharing your catch!  It was a pleasure meeting you and some of the other folks.  
Fair winds.

James


On Jan 13, 2018, at 9:47 AM, JEFFREY KRAUS jmkraus@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Good Morning Amelians,
The kind folks at Kokoarum have given the OK for me to bring my oysters and other goodies to their restaurant and set up a table to put the food on.
Monday 1/15 starting around 4pm.
Any Boat owners and guests are welcome to stop by.
Jeff
Spirit Amel 54 #14


On Sun, Jan 07, 2018 at 10:49 AM, jmkraus@... [amelyachtowners] wrote:

 

Good Morning Amelians,

I'll be back in Le Merin late 1/9.

As long as they don't confiscate my oysters and scallops passing thru customs, I hope to arrange to have our get together when I get back.

I'll post details.

Spirit is at the end of the dock in the last slip. Feel free to stop by and say hi.

Jeff Spirit Amel 54 #14


  

Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

Alan Leslie
 

Maybe relevant....we replaced the AMFA pump with a Johnson VIKING 32.
It seems to pump at about 75% of it's rated flow.
I wonder if it has something to do with the 1.5 meter vertical feed from the sump ??
In any event the Johnson pump drains the sump noticeably faster than the original, which IMHO is a really bad design.
Cheers
Alan
Elyse SM437
Gulf Harbour...waiting for the wind to die down...

Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

greatketch@...
 

Have you had a chance to flow test it yet? My Amel OEM pump pumps about 50% of its rated flow as installed...  I am wondering if you see the same thing with the Sealand pump?

Bill Kinney
sm160 Harmonie
Grand Bahama Is.

Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

James Sterling
 

Update, I installed the T series Sealand 24v.  Although the specs state that if mounted vertically it will be somewhat less efficient, I cannot see any functional difference.  This pump is equal in performance to the Jabsco that was on it.  Much quieter, in fact almost too quiet.  It only draws 3amps and has good suction.  Thanks for the suggestion.




Sent from Yahoo Mail. Get the app


On Thursday, November 30, 2017, 12:15:53 PM CST, greatketch@... [amelyachtowners] wrote:


 

I used one of those Jabsco diaphragm pumps as a shower sump discharge.  I think it lasted about a year.  Sealand makes a pump that is much more robust than anything from Jabsco.  The T-series discharge pump is likely the one you would want.  Like this:


http://amzn.to/2jzkzTD

Technically, they are bellows pumps, not diaphragm pumps, and that is a good thing.  No diaphragm to tear or wear.  It is sometimes described as a "macerator" pump, but it is not, it does not need to be, it pumps all kinds of lumps and chunks without needing to chop it up.

I used one of these for 15 years as part of my Vacuflush toilet in daily use.  Changing the check valves occasionally was the only maintenance ever required.  The check valves are the same kind of joker valve used in toilets.

Bill Kinney
SM160, Harmonie
Fort Lauderdale, FL



---In amelyachtowners@..., wrote :

My boat has a Jabsco Model 59090-0012 Diaphragm pump that has failed.  The pump is no longer manufactured.  Parts may be difficult to find.  Can anyone recommend a replacement diaphragm pump?

James Sterling

> S/V Longbow SM2K #418

Re: [Amel Yacht Owners] Water maker electric motor removal

VLADIMIR SONSEV
 

Patrick, 

I believe that you have to remove the plate with the motors and pump. This is what I did. 
Yes it is difficult. Most likely you have to replace resilient mounts under  the plate. Buy new mounts that have stainless steel threaded connections. Use stainless steel hardware. 

Vladimir
SM 345 "LIFE IS GOOD"

On Jan 15, 2018 18:50, "pjn.mccallin@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Write a can anyone help me please. My 220 volt motor needs to be removed, looking down on the unit it seems to be secured to the motor housing/board by four nuts. My problem is that one can only get two two of the nuts so making it impossible to actually remove the electric motor. Could it be that I have to remove the whole unit eg 220 volt motor, pump, 24volt motor in order to get to the 220volt motor?...

I am hoping that there is a simple solution that I am overlooking?
Any pearls of wisdom much appreciated 
Patrick
Caramelle
Duo D60 dessalator
 


Re: [Amel Yacht Owners] Water maker electric motor removal

Jean-Pierre's MacBook Air <jgermain@...>
 

Hi Patrick,

The best person to talk to is Martijn De Jong.  spain@...

Good luck.

Jean-Pierre Germain
SY Eleuthera, SM 007, Panama



On 15 Jan 2018, at 17:50, pjn.mccallin@... [amelyachtowners] <amelyachtowners@...> wrote:

Write a can anyone help me please. My 220 volt motor needs to be removed, looking down on the unit it seems to be secured to the motor housing/board by four nuts. My problem is that one can only get two two of the nuts so making it impossible to actually remove the electric motor. Could it be that I have to remove the whole unit eg 220 volt motor, pump, 24volt motor in order to get to the 220volt motor?...

I am hoping that there is a simple solution that I am overlooking?
Any pearls of wisdom much appreciated 
Patrick
Caramelle
Duo D60 dessalator
 


Water maker electric motor removal

pjn.mccallin@...
 

Write a can anyone help me please. My 220 volt motor needs to be removed, looking down on the unit it seems to be secured to the motor housing/board by four nuts. My problem is that one can only get two two of the nuts so making it impossible to actually remove the electric motor. Could it be that I have to remove the whole unit eg 220 volt motor, pump, 24volt motor in order to get to the 220volt motor?...
I am hoping that there is a simple solution that I am overlooking?
Any pearls of wisdom much appreciated 
Patrick
Caramelle
Duo D60 dessalator
 

Re: [Amel Yacht Owners] Re: Seafood party in Martinique

Dan Carlson
 

Thanks Jeff, 

Lori and I will look forward to meeting you then.  We are on pontoon#4 now, just down from you and right next to Cream  Puff.

Best regards,  Dan & Lori Carlson on sv BeBe, SM#387


On Sat, Jan 13, 2018 at 5:10 PM, JEFFREY KRAUS jmkraus@... [amelyachtowners]
wrote:
 

Best to You and Peg.
Jeff
Spirit Amel 54 #14


On Sat, Jan 13, 2018 at 01:30 PM, sailor63109@... [amelyachtowners] wrote:

 

Having been a dinner guest of Jeff's in WPB, I wouldn't miss this if I could get there!


Our best regards to Jeff!

Duane & Peg
Wanderer, SM#477

Re: [Amel Yacht Owners] Re: Gasket for Hatches

karkauai
 

Thank you Gabriele! 

Kent Robertson
S/V Kristy
SM243

On Jan 13, 2018, at 16:43, Gabriele Antolini svsunnyside@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Hi,
The gaskets for Goiot Tradition are trapezoidal (14 at the base , 12 at the top and 10 mm high)
Google Rig-Rite then Goiot hatch parts, then Tradition hatch parts, and finally Gaskets for Tradition Hatches.

Gabriele
S/V Sunny Side
Maramu #219



From: "Kent Robertson karkauai@... [amelyachtowners]" <amelyachtowners@...>
To: amelyachtowners@...
Sent: Saturday, 13 January 2018, 15:36
Subject: Re: [Amel Yacht Owners] Re: Gasket for Hatches

 
Thanks Pat.  Does anybody else have the specs or a profile picture of the Goiot Tradition hatch gaskets?

Kent
S/V Kristy
SM243

Kent, It was so flattened out that I did not notice or even looked.
Sorry,
Pat SM #123



Re: [Amel Yacht Owners] Re: Gasket for Hatches

Bill & Judy Rouse <yahoogroups@...>
 

Yes, the Goiot Hatch gaskets are trapezoidal and the Port gaskets are 10mm round.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus

Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970

Re: [Amel Yacht Owners] Re: Gasket for Hatches

svsunnyside
 

Hi,
The gaskets for Goiot Tradition are trapezoidal (14 at the base , 12 at the top and 10 mm high)
Google Rig-Rite then Goiot hatch parts, then Tradition hatch parts, and finally Gaskets for Tradition Hatches.

Gabriele
S/V Sunny Side
Maramu #219



From: "Kent Robertson karkauai@... [amelyachtowners]"
To: amelyachtowners@...
Sent: Saturday, 13 January 2018, 15:36
Subject: Re: [Amel Yacht Owners] Re: Gasket for Hatches

 
Thanks Pat.  Does anybody else have the specs or a profile picture of the Goiot Tradition hatch gaskets?

Kent
S/V Kristy
SM243

Kent, It was so flattened out that I did not notice or even looked.
Sorry,
Pat SM #123