Date   

Re: [Amel Yacht Owners] Rigging

Jean-Pierre's MacBook Air <jgermain@...>
 

Hey Danny,

You are better to pass on an incompetent individual than to trust the AMEL design.  My rig was checked in Le Marin and again in Tahiti.

Fair winds.

Jean-Pierre Germain
SY Eleuthera, SM007
Tonga.


On 18 Sep 2018, at 13:19, Danny and Yvonne SIMMS simms@... [amelyachtowners] <amelyachtowners@...> wrote:


Hi all. It is a boldman who advises against rig work because the winds are lighter in the Pacific and s bold recipient of the advice who takes it. I am a lifetime Pacific sailor and it can be WILD.

I have spent time in the Atlantic too and in my experience it is a pussy cat by comparison but I guess I have not experienced it at its worst.

Actually it is a bold man who advises against rig work anywhere. It is a very personal decision as the guy on the boat pays the price either way.

Kind Regards

Danny

SM 299

Ocean Pearl


On 17 September 2018 at 15:03 "Jean-Pierre's MacBook Air jgermain@... [amelyachtowners]" <amelyachtowners@...> wrote: 

 

Hello Heinz,


I was 5 months in Panama and never heard of a rigger in the country.

However, the winds are lighter in the Pacific and if your rig was checked by a good rigger in the recent past, you’ll be ok.

If you need a GREAT one in Tahiti, look for Benoit Parnaudeau.  He used to rig Isabelle Autissier’s boat plus he skippered a Volvo 60 in the RTW solo event a few years back.

Good luck,

Jean-Pierre Germain,
SY Eleuthera SM 007
Vava’u, TONGA


On 17 Sep 2018, at 04:48, Porter McRoberts portermcroberts@... [amelyachtowners] < amelyachtowners@...> wrote:

Heinz

I believe there is only one rigger on the pacific side. A friend on a 55 would not give him a great review. John.  john@...  would be good to contact.. 

I hope you guys are well!!

Porter 
Ibis A54-152 

Excuse the errors.  
Sent from my IPhone 

On Sep 16, 2018, at 9:11 AM,   heinz@...  [amelyachtowners] < amelyachtowners@...> wrote: 

 

Hallo all


  

I hope everyone survived the hurricane well.

my Quetzal is currently in Shelter Bay Marina in Panama on the dry one. 

Does anyone know a good Rigger in panama? 

I would like to have my rig checked before I go on to the Pacific. 

I would be grateful for an answer.

  

Fair Winds

Heinz Stutenbäumer


SV Quetzal, SM 2000 - 292


 

 


 


 




Series Drogue Construction Details-from someone that used it

eric freedman
 


Re: [Amel Yacht Owners] Re: Amel Rendezvous PARTY AND DRONE PICS

Mike Ondra
 

Nice Vlad!

Mike Ondra

Aletes SM#240

Rock Hall, MD

 

From: amelyachtowners@...
Sent: Tuesday, September 18, 2018 3:53 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Amel Rendezvous PARTY AND DRONE PICS

 

 

All,

 

During the party I propose to give every Captain 3 - 4 minutes for introduction.

Introduction can include:

1. Boat name and year manufacture.

2. Cruising experience and future Cruising plans.

3. Listing of improvements that could be interesting for all.

4. Listing of potential negative surprises with our boats.

5. List important information that can be useful for all Amel owners.

6. List your questions to the group.

 

The introductions will be like appetizers for group detail discussions.

 

 

 

On Tue, Sep 18, 2018, 3:11 PM Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:

 

You’re only the third person to express an interest, Aras.  My guy wanted at least 10 to make it worth his time.


On Tuesday, September 18, 2018, 9:04 AM, n33077@... [amelyachtowners] <amelyachtowners@...> wrote:

 

I'd love some of Fiasco.

 

Aras


Re: [Amel Yacht Owners] Re: Amel Rendezvous PARTY AND DRONE PICS

VLADIMIR SONSEV
 

All,

During the party I propose to give every Captain 3 - 4 minutes for introduction.
Introduction can include:
1. Boat name and year manufacture.
2. Cruising experience and future Cruising plans.
3. Listing of improvements that could be interesting for all.
4. Listing of potential negative surprises with our boats.
5. List important information that can be useful for all Amel owners.
6. List your questions to the group.

The introductions will be like appetizers for group detail discussions.



On Tue, Sep 18, 2018, 3:11 PM Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:
 

You’re only the third person to express an interest, Aras.  My guy wanted at least 10 to make it worth his time.




On Tuesday, September 18, 2018, 9:04 AM, n33077@... [amelyachtowners] <amelyachtowners@...> wrote:

 

I'd love some of Fiasco.

Aras


Re: [Amel Yacht Owners] Re: Amel Rendezvous PARTY AND DRONE PICS

karkauai
 

You’re only the third person to express an interest, Aras.  My guy wanted at least 10 to make it worth his time.




On Tuesday, September 18, 2018, 9:04 AM, n33077@... [amelyachtowners] wrote:

 

I'd love some of Fiasco.

Aras


Re: [Amel Yacht Owners] Interior wood quality

karkauai
 

There is quite a bit of laminate in SM 243, only the trim is solid wood.  It is high-quality plywood and shows no delamination.  After 20 years only the areas immediately adjacent to hatches or ports have lost their varnish.  Everything else still looks like new.
Kent
SM243
Kristy



On Tuesday, September 18, 2018, 1:53 PM, Courtney Gorman Itsfun1@... [amelyachtowners] wrote:

 

wood quality is very similar 54 compared to SM


-----Original Message-----
From: Jay Hosford jay.hosford@... [amelyachtowners]
To: amelyachtowners
Sent: Tue, Sep 18, 2018 1:44 pm
Subject: [Amel Yacht Owners] Interior wood quality

 
Sorry if this is obvious, or already been discussed.

How is the interior wood quality in the 54 compared to the sm? Im pretty sure no laminates are used in the sm and the quality is top notch, but wondered if Amel has retained that quality through the newer models. The current models 50/54/64. Look like they may use laminates on the doors but i could be wrong. Those will be out of my price range any way.



Re: [Amel Yacht Owners] Interior wood quality

Courtney Gorman
 

wood quality is very similar 54 compared to SM


-----Original Message-----
From: Jay Hosford jay.hosford@... [amelyachtowners]
To: amelyachtowners
Sent: Tue, Sep 18, 2018 1:44 pm
Subject: [Amel Yacht Owners] Interior wood quality

 
Sorry if this is obvious, or already been discussed.

How is the interior wood quality in the 54 compared to the sm? Im pretty sure no laminates are used in the sm and the quality is top notch, but wondered if Amel has retained that quality through the newer models. The current models 50/54/64. Look like they may use laminates on the doors but i could be wrong. Those will be out of my price range any way.



Interior wood quality

james Hosford
 

Sorry if this is obvious, or already been discussed.

How is the interior wood quality in the 54 compared to the sm? Im pretty sure no laminates are used in the sm and the quality is top notch, but wondered if Amel has retained that quality through the newer models. The current models 50/54/64. Look like they may use laminates on the doors but i could be wrong. Those will be out of my price range any way.


Re: [Amel Yacht Owners] Voting from Martinique

Paul Cooper <paul.cooper74@...>
 

Thanks Mark!  I will take all that into consideration.

Paul

On Sunday, September 16, 2018, 11:38:05 PM MDT, 'Mark Erdos' mcerdos@... [amelyachtowners] wrote:


 

Paul,

 

First and foremost, congratulations on your new Amel. You are going to love it.

 

Anything other than DHL or FedEx coming from the USA is most likely to get lost or can take up to 8 weeks to arrive. Same is true for mail going to the USA. The marina will happily accept packages and mail if you are in the dock or on a mooring. Be sure to include the vessel name on the outside in large print. Also, mark the mail as “documents – no declared value”. It will clear customs faster with this on it.

 

As for any other suggestions on voting – I’m not sure the group would appreciate me going there.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Bonaire

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, September 16, 2018 4:04 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Voting from Martinique

 

 

Hello group.  We will be new SM owners in a couple weeks in the Windward Islands, and will be staying at Le Marin for a while in November, including election day.  We are trying to figure out how we will vote (as it is kinda important right now...).  We have someone collecting our mail in the US and we thought maybe she could send our ballots to us in Martinique and then we would send them back to the US.  Can you Le Marin people tell me how the folks at the marina handle incoming mail like that?   Or any other suggestions about voting?

Thanks,

Paul C.

SM #238


Re: [Amel Yacht Owners] Volvo air filters / diesel filters

Mohammad Shirloo
 

Hello Alex;

The prices you have been quoted are better than what we have seen in Europe. The one that always seems extremely over priced, is the Volvo air filter element at over 100 Euros.

I don’t think you are being over charged based on what we have seen in the Med.

Respectfully;


Mohammad and Aty
B&B Kokomo
AMEL 54 #099

On Sep 17, 2018, at 8:42 PM, Alex Ramseyer alexramseyer@... [amelyachtowners] <amelyachtowners@...> wrote:

 

The local Volvo dealer in Curacao is charging USD 94.00 for an air filter and USD 46.00 for a diesel filter for my DS3-111. Where do you guys stock parts like this and what are the prices that you see in the market in the U.S. or Europe?
fair winds,
Alex
SY NO STRESS
A54-15


Re: Question about the refrigiration system on an A54

sharona246@...
 

Hi everybody

I bought the osculati pump, 12v version. it is working perfectly and is actually the same pump like Frojet


Lior
SHARONA, A54 #018


Re: Amel Rendezvous PARTY AND DRONE PICS

n33077@...
 

I'd love some of Fiasco.

Aras


Removing drawer faces

Craig Briggs
 

Has anyone removed the false drawer faces on the port side of the main salon? 


I was hoping to trade out one of those unused handles for another that has broken, but I can't figure out how to access it. So before I undertake cutting a hole, I though I'd ask the group.


(This may apply only to the Santorin, where we have 4 drawer faces but only two drawers, the other two being false - I don't know about the SM's) 


Many thanks,

Craig, SN#68 Sangaris, Brunswick, GA


Re: Faulty Residual Current operated Circuit-Breaker,

haggismuncheruk@...
 

Hi, Glad you got it sorted.

Perhaps something like one of these would be a useful addition to the Shorepower supply for preventing issues.



Re: [Amel Yacht Owners] Re: Faulty Residual Current operated Circuit-Breaker,

Alan Leslie
 

Good to hear the issue is resolved

Apologies to all for the multiple posts, but they never turned up from my side...until now !

Cheers
Alan
Elyse SM437
Baie Maa, New Caledonia


Re: [Amel Yacht Owners] Re: Faulty Residual Current operated Circuit-Breaker,

Hajo Hille
 

Alan,

Problem solved.
You are right, it's the shore power side.

In Greece every Marina has a different polarity !
We changed it and everything works.

Thank you very much for your support.


Best regards

Hajo
SM 150
Mitilini Lesbos


Von meinem iPad gesendet

Am 17.09.2018 um 23:53 schrieb sangaris@... [amelyachtowners] <amelyachtowners@...>:

 

I agree with Alan - if those ohm readings were across the un-plugged shore power cord it is definitely bad. You should get infinite, open-circuit readings (assuming you unplugged the cord first).

Good luck with it..


---In amelyachtowners@..., wrote :

Hello 
Seems to me that since you can run all your appliances without tripping the breaker when the generator is running , everything with your appliances is OK.
The problem must be on the shore power side.
It could be that your shore power cable has a fault with leaking to ground, maybe it has been contaminated with salt water.
Your meter measurements indicate that could be the problem.
The measurement between blue and ground and brown and ground should be very high and more or less the same.
You say you have already replaced the plug and the shore power relay, I would suggest replacing the shore power cable itself.
Cheers
Alan
Elyse SM437
Noumea


Re: [Amel Yacht Owners] Volvo air filters / diesel filters

hanspeter baettig
 

Hoi Alex
pretty much expensive. but if we are a owner of AMEL a  SM or 54,55,50,64 we have to spend a lot of money. Ok , I bought all a lot of spare items, maybe for 2 years in Europe. Ok I know you bought the boat in US. So keep speending money because if you will import the spare items from beautiful Euroup you pay a lot of transport/duty cost. 
Maybe you have friends/familie coming to your boat and bring from Amel a lot of spare items. I do it . 
Actually in Cap Verde Crossing soon to Brasil

Grüsse Hanspeter
SM 16/ Tamango 2


----Ursprüngliche Nachricht----
Von : amelyachtowners@...
Datum : 16/09/2018 - 22:36 (MS)
An : amelyachtowners@...
Betreff : [Amel Yacht Owners] Volvo air filters / diesel filters

 

The local Volvo dealer in Curacao is charging USD 94.00 for an air filter and USD 46.00 for a diesel filter for my DS3-111. Where do you guys stock parts like this and what are the prices that you see in the market in the U.S. or Europe?
fair winds,
Alex
SY NO STRESS
A54-15





Re: [Amel Yacht Owners] Rigging

Danny and Yvonne SIMMS
 

Hi all. It is a boldman who advises against rig work because the winds are lighter in the Pacific and s bold recipient of the advice who takes it. I am a lifetime Pacific sailor and it can be WILD.

I have spent time in the Atlantic too and in my experience it is a pussy cat by comparison but I guess I have not experienced it at its worst.

Actually it is a bold man who advises against rig work anywhere. It is a very personal decision as the guy on the boat pays the price either way.

Kind Regards

Danny

SM 299

Ocean Pearl


On 17 September 2018 at 15:03 "Jean-Pierre's MacBook Air jgermain@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

Hello Heinz,


I was 5 months in Panama and never heard of a rigger in the country.

However, the winds are lighter in the Pacific and if your rig was checked by a good rigger in the recent past, you’ll be ok.

If you need a GREAT one in Tahiti, look for Benoit Parnaudeau.  He used to rig Isabelle Autissier’s boat plus he skippered a Volvo 60 in the RTW solo event a few years back.

Good luck,

Jean-Pierre Germain,
SY Eleuthera SM 007
Vava’u, TONGA


On 17 Sep 2018, at 04:48, Porter McRoberts portermcroberts@... [amelyachtowners] < amelyachtowners@...> wrote:

Heinz

I believe there is only one rigger on the pacific side. A friend on a 55 would not give him a great review. John.  john@...  would be good to contact.. 

I hope you guys are well!!

Porter 
Ibis A54-152

Excuse the errors.  
Sent from my IPhone 

On Sep 16, 2018, at 9:11 AM,   heinz@...  [amelyachtowners] < amelyachtowners@...> wrote:

 

Hallo all


 

I hope everyone survived the hurricane well.

my Quetzal is currently in Shelter Bay Marina in Panama on the dry one. 

Does anyone know a good Rigger in panama? 

I would like to have my rig checked before I go on to the Pacific. 

I would be grateful for an answer.

 

Fair Winds

Heinz Stutenbäumer


SV Quetzal, SM 2000 - 292


 

 


 


 


In gear when sailing.

Danny and Yvonne SIMMS
 

We have the hurth gearbox with manual shift and no shaft brake. (0.8 litre atf). Also auto prop. To swivel the auto prop to low drag position it needs to be In gear. Which? Forward or reverse? Easy. When sailing and the shsft is spinning merrily in neutral put it into gear. The correct way will result in a satisfying Clunk and the shaft will stop. The wrong way, no clunk and the shaft will continue turning, albeit more slowly. This slow turning is because the clutches are lightly engaged and obviously this will result in unessesary wear.

Kind Regards

Danny

SM 299

Ocean pearl.


Re: Faulty Residual Current operated Circuit-Breaker,

Craig Briggs
 

I agree with Alan - if those ohm readings were across the un-plugged shore power cord it is definitely bad. You should get infinite, open-circuit readings (assuming you unplugged the cord first).
Good luck with it..


---In amelyachtowners@..., <divanz620@...> wrote :

Hello 
Seems to me that since you can run all your appliances without tripping the breaker when the generator is running , everything with your appliances is OK.
The problem must be on the shore power side.
It could be that your shore power cable has a fault with leaking to ground, maybe it has been contaminated with salt water.
Your meter measurements indicate that could be the problem.
The measurement between blue and ground and brown and ground should be very high and more or less the same.
You say you have already replaced the plug and the shore power relay, I would suggest replacing the shore power cable itself.
Cheers
Alan
Elyse SM437
Noumea

16981 - 17000 of 59138