Date   

Re: [Amel Yacht Owners] Martinique.

VLADIMIR SONSEV
 

I plan to be in Martinique on a dock January 7 for a week or more.
I will be very happy to meet other Amel owners.

SM 345 "LIFE is Good"
Vladimir

On Dec 4, 2017 17:34, "'sailormon' kimberlite@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Hi Mark,

I usually start my letter stating that I am sorry that I do not speak French and then write in English. The marina  usually responds in English.

 

The bracket that supports the Genoa furler was straightened by the rigger Gaetan when they changed my rigging. The riggers there are amazing and have everything needed for an Amel. Their head Amel rigger has been doing Amels for 25 years. Good time to have them check and tune your rigging.

 

I also had my Genoa furler rebuilt by Amel. Fortunately since I had added grease ports, the  bronze gear and worm gear were in very good condition. They only replaced the wire, 9 bearings and 4 seals. They said it would be good for another 15 years if I kept adding grease.

 

Have you removed the shaft that connects the outhaul motor to the outhaul winch on the main boom? If it doesn’t come out , I would suggest that you have the rigger remove it . Twice a year I remove mine and cover it with anti-seize grease. I also removed a few thousands of an inch from the key in the shaft.

 

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Monday, December 04, 2017 4:10 PM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Martinique.

 

 

Eric,

 

We will be here for at least 2 months, maybe three. We do need some stuff done by Amel. We need to have the wood replaced in our forward lockers (over the anchor well). I could do it myself but hate hate hate to sand fiberglass on a hot day. For me, this is money well spent. And the do-hicky under our furling headsail unit is bent (the thing fastening the big bracket attaches to). This needs to be replaced by a rigger.

 

Thanks for the offer to mule stuff for us. We are in good shape right now since Paul and Anna-Marie on Rita Kathryn carried a duffle bag of goodies to St. Lucia. However, If we need something, we’ll be sure to let you know.

 

We’ll still be here when you get back so let’s get together – finally!

 

Are you sure the electric is included???? We received a separate quote for it when we made the reservation. However, it was all in French so it could have been lost in Google Translate. I thought it was included for monthly rates but not weekly or daily. But, now I’m not sure.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Martinique

www.creampuff.us

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Monday, December 4, 2017 4:42 PM
To: amelyachtowners@yahoogroups.com
Subject: [Amel Yacht Owners] Martinique.

 

 

Hi Mark,

How long will you be at the dock? I will return January 18.

It is a bargain compared to St. Maarten prices and the electric is included.

 

Kimberlite is also there however I am in NY at the moment.

 

What model and hull number do you have?

Will you be having work done by Amel while you are there?

 

My friend Jeff Krause will be arriving about December 10 in his 54  named Spirit.

Please say hi for me. Also Miles Bidwell on Lady Bug a 53 is there now. Also please say hi for me.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Monday, December 04, 2017 3:28 PM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Eric,

 

Right now we are anchored off Saint Anne’s. We well be moving into the marina Wednesday. Not sure what our slip assignment is yet.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

?

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Monday, December 4, 2017 3:30 PM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@yahoogroups.com
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@yahoogroups.com
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: [Amel Yacht Owners] Re: Charcoal Filter

Ryan Meador
 

Hi Eric,
That filter I linked is not just carbon, it is some other material with a carbon layer on the outside.  It is rated for 15k gallons or 3 months.  I figure I can stretch it a bit beyond 3 months because I'm using nowhere near that much water (maybe 350 gallons a month? perhaps less).  For the main water supply, this is perfectly fine for me.  I'll need to figure out if it works for the watermaker if and when I decide to get it operational.

I have not contacted Dessalator as I'm not ready to tackle that project (thank you for the tip about the Maine distributor though).  The unit is essentially unused.  I believe it has 8 hours on it.  Hopefully all it needs is a new set of membranes, but I haven't even tried turning it on.  I'll cross that bridge when (and if) I have firm plans of going on an extended cruise.

Thanks,
Ryan
SM 233 Iteration
Boston, MA, USA

On Mon, Dec 4, 2017 at 5:16 PM, Vladimir Sonsev sonsev52@... [amelyachtowners] <amelyachtowners@...> wrote:
 

One more advice:
 If you do not have a booster pump turn on the water maker on flushing mode and then switch to watermarking mode. That helps to prime high pressure pump.

Vladimir

On Dec 4, 2017 10:39, "sailor63109@... [amelyachtowners]" <amelyachtowners@yahoogroups.com> wrote:
 

Paul, Alexandre, and Vladimir:


Thanks for your thoughts and experiences!
Duane



Re: [Amel Yacht Owners] Re: Charcoal Filter

eric freedman
 

Hi ,

What model and hull number do  you have?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 5:17 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Charcoal Filter

 

 

One more advice:

 If you do not have a booster pump turn on the water maker on flushing mode and then switch to watermarking mode. That helps to prime high pressure pump.

Vladimir

 

On Dec 4, 2017 10:39, "sailor63109@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

Paul, Alexandre, and Vladimir:

 

Thanks for your thoughts and experiences!

Duane


Re: [Amel Yacht Owners] Re: Charcoal Filter

VLADIMIR SONSEV
 

One more advice:
 If you do not have a booster pump turn on the water maker on flushing mode and then switch to watermarking mode. That helps to prime high pressure pump.

Vladimir

On Dec 4, 2017 10:39, "sailor63109@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Paul, Alexandre, and Vladimir:


Thanks for your thoughts and experiences!
Duane


Re: [Amel Yacht Owners] Re: Charcoal Filter

eric freedman
 

Hi Ryan,

The carbon filters have a relatively short life. Please check out the label on the ones you are using.

Did you contact the Dessalator distributor in Maine?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 4:22 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Charcoal Filter

 

 

I installed this filter on my boat, but unfortunately after the branch that goes to the watermaker because I couldn't figure out a good way to mount it without running hoses all over the place.  I have not noticed a reduction in flow at all.  I'm toying with the idea of putting the same or similar filter into the existing filter housing for the watermaker to keep chlorine out, but it is low priority as my watermaker is not currently operational.

 

Ryan

SM 233 Iteration

Boston, MA, USA

 

On Mon, Dec 4, 2017 at 9:39 AM, sailor63109@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Paul, Alexandre, and Vladimir:

 

Thanks for your thoughts and experiences!

Duane

 


Re: [Amel Yacht Owners] Martinique.

eric freedman
 

Hi Mark,

I usually start my letter stating that I am sorry that I do not speak French and then write in English. The marina  usually responds in English.

 

The bracket that supports the Genoa furler was straightened by the rigger Gaetan when they changed my rigging. The riggers there are amazing and have everything needed for an Amel. Their head Amel rigger has been doing Amels for 25 years. Good time to have them check and tune your rigging.

 

I also had my Genoa furler rebuilt by Amel. Fortunately since I had added grease ports, the  bronze gear and worm gear were in very good condition. They only replaced the wire, 9 bearings and 4 seals. They said it would be good for another 15 years if I kept adding grease.

 

Have you removed the shaft that connects the outhaul motor to the outhaul winch on the main boom? If it doesn’t come out , I would suggest that you have the rigger remove it . Twice a year I remove mine and cover it with anti-seize grease. I also removed a few thousands of an inch from the key in the shaft.

 

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 4:10 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Martinique.

 

 

Eric,

 

We will be here for at least 2 months, maybe three. We do need some stuff done by Amel. We need to have the wood replaced in our forward lockers (over the anchor well). I could do it myself but hate hate hate to sand fiberglass on a hot day. For me, this is money well spent. And the do-hicky under our furling headsail unit is bent (the thing fastening the big bracket attaches to). This needs to be replaced by a rigger.

 

Thanks for the offer to mule stuff for us. We are in good shape right now since Paul and Anna-Marie on Rita Kathryn carried a duffle bag of goodies to St. Lucia. However, If we need something, we’ll be sure to let you know.

 

We’ll still be here when you get back so let’s get together – finally!

 

Are you sure the electric is included???? We received a separate quote for it when we made the reservation. However, it was all in French so it could have been lost in Google Translate. I thought it was included for monthly rates but not weekly or daily. But, now I’m not sure.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 4:42 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Martinique.

 

 

Hi Mark,

How long will you be at the dock? I will return January 18.

It is a bargain compared to St. Maarten prices and the electric is included.

 

Kimberlite is also there however I am in NY at the moment.

 

What model and hull number do you have?

Will you be having work done by Amel while you are there?

 

My friend Jeff Krause will be arriving about December 10 in his 54  named Spirit.

Please say hi for me. Also Miles Bidwell on Lady Bug a 53 is there now. Also please say hi for me.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 3:28 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Eric,

 

Right now we are anchored off Saint Anne’s. We well be moving into the marina Wednesday. Not sure what our slip assignment is yet.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

?

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 3:30 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: [Amel Yacht Owners] Re: Charcoal Filter

Ryan Meador
 

I installed this filter on my boat, but unfortunately after the branch that goes to the watermaker because I couldn't figure out a good way to mount it without running hoses all over the place.  I have not noticed a reduction in flow at all.  I'm toying with the idea of putting the same or similar filter into the existing filter housing for the watermaker to keep chlorine out, but it is low priority as my watermaker is not currently operational.

Ryan
SM 233 Iteration
Boston, MA, USA

On Mon, Dec 4, 2017 at 9:39 AM, sailor63109@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Paul, Alexandre, and Vladimir:


Thanks for your thoughts and experiences!
Duane



Re: [Amel Yacht Owners] Martinique.

Mark Erdos
 

Eric,

 

We will be here for at least 2 months, maybe three. We do need some stuff done by Amel. We need to have the wood replaced in our forward lockers (over the anchor well). I could do it myself but hate hate hate to sand fiberglass on a hot day. For me, this is money well spent. And the do-hicky under our furling headsail unit is bent (the thing fastening the big bracket attaches to). This needs to be replaced by a rigger.

 

Thanks for the offer to mule stuff for us. We are in good shape right now since Paul and Anna-Marie on Rita Kathryn carried a duffle bag of goodies to St. Lucia. However, If we need something, we’ll be sure to let you know.

 

We’ll still be here when you get back so let’s get together – finally!

 

Are you sure the electric is included???? We received a separate quote for it when we made the reservation. However, it was all in French so it could have been lost in Google Translate. I thought it was included for monthly rates but not weekly or daily. But, now I’m not sure.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 4:42 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Martinique.

 

 

Hi Mark,

How long will you be at the dock? I will return January 18.

It is a bargain compared to St. Maarten prices and the electric is included.

 

Kimberlite is also there however I am in NY at the moment.

 

What model and hull number do you have?

Will you be having work done by Amel while you are there?

 

My friend Jeff Krause will be arriving about December 10 in his 54  named Spirit.

Please say hi for me. Also Miles Bidwell on Lady Bug a 53 is there now. Also please say hi for me.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 3:28 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Eric,

 

Right now we are anchored off Saint Anne’s. We well be moving into the marina Wednesday. Not sure what our slip assignment is yet.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

?

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 3:30 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: Martinique.

eric freedman
 

Mark,

I forgot to ask if there is anything you need from up here ?

I arrive, as I  said January 18.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 


Martinique.

eric freedman
 

Hi Mark,

How long will you be at the dock? I will return January 18.

It is a bargain compared to St. Maarten prices and the electric is included.

 

Kimberlite is also there however I am in NY at the moment.

 

What model and hull number do you have?

Will you be having work done by Amel while you are there?

 

My friend Jeff Krause will be arriving about December 10 in his 54  named Spirit.

Please say hi for me. Also Miles Bidwell on Lady Bug a 53 is there now. Also please say hi for me.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 3:28 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Eric,

 

Right now we are anchored off Saint Anne’s. We well be moving into the marina Wednesday. Not sure what our slip assignment is yet.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

?

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 3:30 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

Mark Erdos
 

Forgot to say we’ll be here for a couple of months.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 3:30 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

Mark Erdos
 

Hi Eric,

 

Right now we are anchored off Saint Anne’s. We well be moving into the marina Wednesday. Not sure what our slip assignment is yet.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 4, 2017 3:30 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

eric freedman
 

Hi Mark,

How long will you be in Martinique?

Are you in the marina with the other Amels?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 04, 2017 1:03 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

Mark Erdos
 

If you make it to the windward Islands I would be interested in taking the old pump of your hands for the parts you mention. We don’t plan on going much further north than Guadeloupe this season.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising – Martinique

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of thomas.kleman
Sent: Monday, December 4, 2017 1:57 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

 

 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

 

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

 

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: Diaphragm Bilge Pump failure.

thomas.kleman <no_reply@...>
 

Hello all- I own Super Maramu #422, L'ORIENT. I replaced my original bilge pump at sea a few months ago as it started leaking from the seal with the diaphragm. Later, I took it apart and noted (among other things) that the all-important plastic gear is intact; the motor and pivot arm appear fine as well.......which I believe is important for folks who elect to rebuild and keep theirs.

I'm keeping my replacement bilge pump in service and would entertain interesting barter offers of spare parts for my leaking but still largely operational bilge pump. Payment in a reasonable Sancerre is also acceptable.

I'll be back on my boat in Antigua end of December and will be stationary for at least a few weeks doing bottom job/prop seal/bow thruster service. Lorient422"at"gmail"dot"com.


Re: Charcoal Filter

Duane Siegfri
 

Paul, Alexandre, and Vladimir:

Thanks for your thoughts and experiences!
Duane


Re: [Amel Yacht Owners] Amel 54 dishwasher failure (and solution)

Mohammad Shirloo
 

Hello Thomas;

 

Thank you for sharing your experience.

 

Mohammad and Aty

B&B Kokomo

Amel 54 #099

 


From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Saturday, December 02, 2017 11:11 AM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Amel 54 dishwasher failure (and solution)

 

 

Of potential interest to 54-ians with a Dometic dishwasher. 

 

We had an issue with it, leaking heavily and showing error code 10 (issue with the water intake, as per the manual). 

 

The problem was that the conduit to some sort of "there is enough water in the dishwasher" captor was very dirty, preventing it from stopping the inflow until the no-intake water error was reported. Unfortunately that means the overflow too. 

 

The solution was simply to clean that conduit, after removing the plastic ring that covers it at the bottom of the inside of the dishwasher (3 screws) underneath the metal filter. No need to remove the dishwasher from its location to do that, although we did to track to issue down, and it's fairly straightforward. 

 

Hope that will help 

 

 

Thomas & Soraya

Garulfo

Amel 54 #122

Gran Canaria, Canary Island, Spain 

 


Re: [Amel Yacht Owners] Diaphragm Bilge Pump failure.

greatketch@...
 


James,

We went through the Bahamas last year and had a great time.  There are places we want to visit again and new places to see.  So far our favorite stop has been the more remote island of Mayaguana.

A vented loop shouldn't add much resistance, it's pretty straight through, I think your guess of a foot of head is a good one.    Putting in a vent and breaking the syphon action does eliminate the "credit" you get for the down slope of the piping past that point.   So you have to count the static head up to the vent, and then not subtract the reduced height to the discharge.

Not sharpening my pencil too much, but with 2 in ID smooth bore pipe or hose, and that pump I'd expect between 1500 and 2000GPH in the system you describe.  Getting a better estimate than that is probably beyond the precision of the data we have available.

FYI, To measure the flow from my bilge pump, I ran the pump until it first sucked air and turned it off.  I then added a measured amount of water (12 liters) to the sump, and then ran it again until it sucked air and called that the time to discharge 12 liters.



---In amelyachtowners@..., <lokiyawl2@...> wrote :

Bill,
  Have a great time in the Bahamas.  We have spent quite a bit of time over there on various boats over the years.
  What a great resource you are.  It will be intersting to compare the actual test data to the predictions.  If I decide to add this pump, I think that I can get by with only 6-7' of piping which would be 2" smooth bore fiberglass piping with a length of hose to connect the pump to the piping.  No elbows but some gentle bends. Can you tell me the losses to expect in a vented loop?   This would also be fiberglass pipe so I can make the radius the optinum curve.  I assume that some energy is returned as the fluid is falling from the vent to the discharge but have no idea of how to calculate that part.  The 4 foot actual lift might be 3 1/2' but the vented loop may add another foot?
  The Seland pump can be an ongoing offer and maybe if you want I will also send down the 4000 pump for you to test as well if it is of interest.

James
SV Sueno, Maramu #220




Re: [Amel Yacht Owners] Diaphragm Bilge Pump failure.

James Alton
 

Bill,
  Have a great time in the Bahamas.  We have spent quite a bit of time over there on various boats over the years.
  What a great resource you are.  It will be intersting to compare the actual test data to the predictions.  If I decide to add this pump, I think that I can get by with only 6-7' of piping which would be 2" smooth bore fiberglass piping with a length of hose to connect the pump to the piping.  No elbows but some gentle bends. Can you tell me the losses to expect in a vented loop?   This would also be fiberglass pipe so I can make the radius the optinum curve.  I assume that some energy is returned as the fluid is falling from the vent to the discharge but have no idea of how to calculate that part.  The 4 foot actual lift might be 3 1/2' but the vented loop may add another foot?
  The Seland pump can be an ongoing offer and maybe if you want I will also send down the 4000 pump for you to test as well if it is of interest.

James
SV Sueno, Maramu #220


Sent from Samsung Mobile



-------- Original message --------
From: "greatketch@... [amelyachtowners]" <amelyachtowners@...>
Date: 12-03-2017 12:02 PM (GMT-04:00)
To: amelyachtowners@...
Subject: Re: Re: [Amel Yacht Owners] Diaphragm Bilge Pump failure.


 

James,


Your offer of testing a Sealand pump in an Amel bilge is fun and fascinating. Unfortunetly we'll be headed to the Bahamas before such fun could be had!

Yes, the Rule can pump 27 feet up, but at zero flow rate.  Also, the head required to actually move water is more than just the lift height.  The piping resistance is the larger and usually more significant contributor.  

(Note, I am a chemical engineer, and for a time pumps and pump selection was an important part of my world.  So I'll likely subject the good members of this forum to way more detail than they need...)

I did a quick and dirty calculation of flow rate for the following system:

10 feet of smooth bore 1.5" hose, two elbows, a total of 4 feet of vertical lift. I calculate such a system would require a pump discharge head of about 6.7 feet at 10 00GPH.  Pretty close to a Rule 4000 pump curve.  (Details available on request for you masochists out there...)  2 inch hose would be better, but you get the idea...


Bill Kinney
SM160,  Harmonie
Fort Lauderdale, FL


Re: [Amel Yacht Owners] Re: Bow Thuster Control Box

Bill & Judy Rouse <yahoogroups@...>
 

Mark,

There were 3 variations of the bow thruster control that I know of. I have no other information.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus

Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970