Hello Helen, Kosta, thank you for reply. Didi you remove the Swivel from furler or you did without it? I have Bill-s book and there is the whole process of removing the swivel and performing the work

Few days ago when furling Genoa I have noticed that at the top it was turning with steps not continuously. I made a video that I am attaching to this post. My question is if this is something that I h

Thank you all for your inputs. Nothing goes easy in this part of the world. What is the diameter of the aluminium stand where the old lamp is installed? And, what kind of the is bulb installed in the

I just got delivered Aqua Signal 34 LED Tricolor plus anchor navigation light. Regarding voltage it is written 12/24V. I can not find the max voltage for this lamp. Should I convert 24V to 12V to be o

I will add my experience. I owned 4 boats since 1996. All except the last one (Amel) were new. If one is on the market for 20+ years old Amel it is always a little bit of lack and personal preparation

Danny, you have put it as it happened. I know that maneuvering to port side propeller is pushing towards the body of bow thruster and when maundering to starboard side propeller is pulling and all for

No. First time it happened when I was moored, second, today, when I was manuvering to my berth. It was like 20m away from berth. There is nothing there.

I just loose the prop.

To Mark. Yes I do. This time it was at least 15 second after I used it for moving to port side.

Sorry to come back with this issue. Today I lost propeller again when I was going stern to my berth in marina. All was ok when I was using bow truster to move boat to port side. When I tried to move b

I need to apologise for stupid thing that have happened. After assembling yesterday afternoon I tested and it happened what I have written this morning. Today I did all again, alone, and when I got bo

I hope no rules are broken with this info. I just found out that new marina in Pula, Croatia is offering wery attractive deals for wintering and year-round contracts for 2022-2023. They will go up to

I am back with bow thruster problem. Yesterday, when back from 10 days sailing bow thruster worked on one side and just spining on the other side. I replced all parts with new ones that I got few week

Hello Jose, Here is email address where you can inquire for membranes. Cost was 609€ including VAT and delivery to Slovenia. Bastien@... best regards

#solution #replacement

Hello, maybe this might help. http://www.cempumps.com/default.php?t=site&pgid=124

This is option as well. Parts for my pump were 25 euro and few hours of work from my side.

I adding the schematics of the pump. Item 25 have to unscrewed.

I have the same pump. There is a screw on the left side on the front of the pump (it 13,15 or 17). There you have to add water and then it will start working. That was how I fixed it after replacing s

Hi Jose, 12,9V after 20hours of charging does not warranty that battery capacity is 110Ah if the batteries are rated to be 110Ah. Your measurement after you disconnected charger are showing that batte

Hello Jose, after 20 hours of charging with 60A charger you have 80% charged batteries? I would say that this is not ok. I have 11 years old Victron batteries that charge to 100% in less than that tim