I am back with bow thruster problem. Yesterday, when back from 10 days sailing bow thruster worked on one side and just spining on the other side. I replced all parts with new ones that I got few week

Hello Jose, Here is email address where you can inquire for membranes. Cost was 609€ including VAT and delivery to Slovenia. Bastien@... best regards

#solution #replacement

Hello, maybe this might help. http://www.cempumps.com/default.php?t=site&pgid=124

This is option as well. Parts for my pump were 25 euro and few hours of work from my side.

I adding the schematics of the pump. Item 25 have to unscrewed.

I have the same pump. There is a screw on the left side on the front of the pump (it 13,15 or 17). There you have to add water and then it will start working. That was how I fixed it after replacing s

Hi Jose, 12,9V after 20hours of charging does not warranty that battery capacity is 110Ah if the batteries are rated to be 110Ah. Your measurement after you disconnected charger are showing that batte

Hello Jose, after 20 hours of charging with 60A charger you have 80% charged batteries? I would say that this is not ok. I have 11 years old Victron batteries that charge to 100% in less than that tim

Hello, I feel I have to share my experience with Dessalator support. I hope I am not breaking any rules. Few weeks ago I changed membranes and was struggling with pressure switch the switches watermak

Thank you Bill. One more question. Old cables are all in place and here is question. Person that will do this work is saying the he will cut the cable at the top, connect the old and new cable togethe

I have all new antennas with 25m cable to be installed on main mast and mizzen. How difficult have this been to replace old cables in both masts? I have read how was done when masts was down but can n

Update on the problem. Used the kit for bow thruster removal in the water. Worked fine. Opened the lower part and found that there was almost no damage. Replaced the plastic cover, did a little drilli

Hi, I had the same problem. Went to local hardware store and got this part. Cost 5 euro.

The only way to find out is to do all again. My truster did not work 5 seconds after change using Amel kit. I will have a chance to use Amel bow truster tool for the first time. Thank you all for your

There were no instructions from Amel. Simply the cover is not usable. Will call Amel tomorrow and discus the problem. Thank you.

The round cover delivered from Amel didi not fit so I used the old one. Anyway I will have to do all over again. I might learn some more :)).

That might be a problem as I made key thinner. I have replaced all parts inside (used a kit from Amel) and had a problem with key not fitting in. This is answer to situation that at first it worked an

After a 3 weeks on hard and lot of projects done we are back in the water. All looked well until I started manoeuvre to get in to my berth in marina. Bow truster at first worked and then suddenly I he

This is how one can find what is he looking for.It It is not for your engine model number. It is for D3-110I-C. I do not know the difference between A and C model. https://marinepartseurope.com/explod

Hi NIck, Try site www.marinepartseurope.com. There you can search by Volvo engine model, and for every part of the engine there is schematics as well. Then just order. I usually buy from them. Regards