I have a client in need of a bow thruster motor. I know at least one owner has a spare, but I have forgotten who has the spare. If anyone knows of an available motor, please let me know by responding

James, To explain: When a halyard gets caught around the furling swivel, the swivel spins the halyard around the foil and usually eventually the rigging wire. If the end of the halyard is secured, the

It is true that Amel did not modify either the Reckmann or ProFurl swivel to add horns, but in a few halyard wrap situations that I know of, the 10mm horns were bent around the swivel. I have seen thi

Willem, Agree! Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com Yacht School Calendar: www.prepar

Nick, Standing rigging has increased a lot over the past 4 years. Some boat manufacturers have chosen alternative and less costly suppliers. In a way, I can't blame Amel because how many new boat buye

The problem is you used the old cover. It will absolutely give you this problem. The new cover would have held the axle (prop shaft) in the correct alignment. The old cover is a different thickness at

Agree. It is either the gear is worn, or someone has not performed the correct service when replacing the gear. The round gear cover that Amel sends with the kit must be used with the new kit. If you

Barry, Yes. As you know, I negotiated special pricing for my clients, but also shared that with all members of this Group. The discount is 18% if you buy a full set of 4 sails or 15% for purchases of

This may help describe what Bill Kinney is referring to. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.c

Nick, I believe that Amel must believe that they made a mistake when they introduced the A54 with a direct seawater heat exchange for the refrigeration system. Of course, the efficiency argument won t

Richard, I do not understand this: "I tried to never let the water level drop below where the water exits the filter area into the sea chest." I hope absolutely no chemical got into the watermaker sal

Richard It could be a lot of things but with both of those fluctuating, it is probably not an issue with either gauge. Here are the suspects in the order I would check: Clogged sea chest/strainer, inc

It is a worn-out 12mm ceramic mechanical seal. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My

The mechanical seal had been leaking for some time. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com Vi

Luis, There is only one manufacturer of membranes in the world. No matter which reseller you buy Membranes from, they are manufactured by DOW Filmtec. They are normally packaged in a plastic bag with

#file-notice

By my calculations, QSails has delivered sails to over 100 Amel owners, with only 1 complaint about the quality. QSails saved each owner a substantial amount. They never had any significant delivery p

A photo of what Alan describes might help: CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Tra

#file-notice

Rebuild Climma Rebuild Calpeda Pump Amel SM, 54, & 55 p... or Replace You have some choices here. I assume this is the Calpeda for the primary seawater pump, rather than the chiller circulation pump o

I believe this will help: Lewmar Chain Counter & Sensor Information for A... Lewmar sensor & magnet kit for V1-V5.pdf CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winn

#replacement #solution

Thanks, I have updated this: Special Isolated Ground Parts for Volvo D3.pdf CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.Amel