For those ordering or planning to order SM2k Genoa Rebuild Kits Mr. VIGNANDO, the original builder of the Amel SM2k Genoa furler can be a challenging guy to deal with. It took me over a year to get hi

Martin, This manual will probably apply, but it does not apply to earlier Dolphin chargers installed in SMs before about 2004.

#file-notice

Slavco, I will try to answer some of this in Red: My Dolphin 24/30A looks different than 24/50A. It have only 5 LEDs that displays the status of the charger. There are no buttons like on 24/50A charge

Ken, Congratulations! Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Training Calendar

Elja, Sure is. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Training Calendar

#replacement

Mark, I really like these seals. They also come as stainless steel coated with Loctite...see below:

#solution #spares

Mark, If we had an OSCAR for the BEST supporting member of the Amel Group, you would certainly win it, even though there is significant competition for several others. This is a great find...please po

#solution #spares

MolyKote CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Training Calendar Create your own ema

#replacement

I ship my Amel Books worldwide. This is a problem everywhere and some places are much worse than others. All shippers use commercial airlines as either the primary source or a secondary source. The la

Jose, yes I had a typo...42 mm housing for the B&G Depth, but B&G specs are 50.8mm (2 inches) for the Forward-Looking Transducer...see below. I cannot figure out how you replaced the B&G Depth Transdu

On Thu, Feb 3, 2022 at 3:03 PM Randall Walker <sailingalbedo@...> wrote: Hello all, Picking up all the new rudder post packing from the local marine store here in Canada for my 54, This is my fi

#replacement

Jose, I read your posting with interest and I have an important question. The B&G pecs on the Forward Scanner state it requires a 50.8 mm hole. The B&G Depth Sounder that came with your SM requires a

Ian, the first photo is of the aft-most section of the tank. The pickup line is copper and could possibly shake and knock against the wall, but I have to wonder what would cause that. Is it possible t

Groups.io is constantly working on an issue caused by users of groups.io. Some users either accidentally mark incoming messages as spam, but more often when they do not want to receive any more emails

I believe that there are at least 2 SMs in salvage. One was in Guadalupe, the other in St. Martin. Maybe there are more than 2 because there is one in Trinidad that should be in salvage. I would like

Our service used AWS. The only issues we have is with certain ISPs. Optonline and Yahoo are historically the biggest problems. Think about it. If over 1000 users do not have the problem you are experi

Thomas, A & T Instruments. tell them I referred you. I am trying to get a discount from them for all Amel owners. Email: sarah@... https://www.aandtinstruments.com/products/sensors/

Amel has never used DIN that I know of, but several owners, including me changed the gypsy to DIN. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Islan

Eric, Yes, Amel has a rebuild kit that will fit the foils on a SM and 54, except for late model 54s where Amel increased the size of the foil on the 54 main furler. CW Bill Rouse Amel Owners Yacht Sch

I am not sure what you are doing but will add that you have to do the same process with each pilot. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston