I heard back from US Plastics. This fitting is not one they make. Also, not available from Banjo or McMaster. I am at a complete loss for this fitting. Any help would be greatly appreciated. Plastic 1

Thanks Tom. I send them a note seems I can’t find it on their site. I have also check the Banjo catalog and McMaster. Not much luck. With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K

I give up. Where does one buy a plastic 1¼” male pipe thread to a 35mm hose barb? With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Polynesi

Hi Bill, To prove your point. I have never used the seat cover for our Highfield. I really have no use for it and would have preferred it if they took $20 off the price of the dinghy and kept it. I gu

#dinghy

Hi Bill, Thanks. I do like the manifold made in Martinique. The only thing I would do differently is instead of the 90° elbow at the end, I would have a removable cap to enable access to the main pipe

I am looking for some ideas to redo the sea chest. I am pretty sure the unit I have is not factory since an additional water maker was added by the previous owner. Also, my current unit is polypropyle

Hi Tom, When Amel installs the compressor it is mounted on a piece of wood and fitted to rails. This means it can be slid back out of the way when not needed. The wood the compressor is mounted on can

You may find this a good read: https://www.pbo.co.uk/gear/5-forward-looking-sonar-tested-29321 With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, Fr

Paul, I have a forward looking sonar. It came with the boat. I have used it only a handful of times in the San Blas Islands and now in French Poly. It is a very expensive item that can easily be subst

Thomas, If you need a vacuum pump and gauges, I have a set. You know where to find me J With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Po

Rob, The most concerning part of this picture is the fan. The fan should be clean and you should be able to flick it with your fingertip and watch it spin. If it doesn’t spin freely, the problem with

Porter, Sorry, I can’t help with your issue but, if in your hunt for a solution you happened to find a shop who repairs electric motors, please let me know. I have a couple of spares I would like to h

I just recently did this job. Jabsco claims in their literature the holes on the new part align with the holes on the older style base. They lied. The old style has 4 holes the new one has three holes

I replace the Caleda pump about 5 years ago based on a recommendation by Coastal Climate Control (the US Climma distributor). This is the pump I have: https://www.marchpump.com/pump/te-5-5c-md-13-phas

Gotta love Ali-Express – Only $180! https://www.aliexpress.com/i/4000116905213.html With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Polyne

It should be noted that in the Onan instructions and on the remote start switch it states 20 seconds in the maximum for the pre-heat. With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K

Bill, Is this a piece of foam – about 2-3” - attached with a tie to the cable? It’s hard to tell. Thanks. Sailing Vessel - Cream Puff www.creampuff.us From: main@AmelYachtOwners.groups.io [mailto:main

If someone could please post a picture of the foam, this would be very helpful to me. I will soon be replacing the Antenna (main mast), cables and VHF. I plan to thread the new cable from the top of t

Hi Soraya, At the first sign the valve becomes sticky, we use vegetable oil to lube the valve. With the holding tank empty and the valve closed, remove the deck cap and pour about a 100ml of vegetable

How do they come off and go on the track? With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Polynesia www.creampuff.us From: main@AmelYachtO