|
Furuno 711 navpilot compass offset adjustment.
Hi Matt, what are you checking the heading against. If it is the fitted compass, have you had it swung (ie adjusted for error) Danny SM 299 Ocean Pearl
Hi Matt, what are you checking the heading against. If it is the fitted compass, have you had it swung (ie adjusted for error) Danny SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
· #66053
·
|
|
Offshore PFD / harness opinions
Thanks Ian, I have long held the veiw that to go overboard in a tethered harness would be fatal if the boat wasn't stopped very quickly even in calm water, in a seaway with 30knots or more of wind, (w
Thanks Ian, I have long held the veiw that to go overboard in a tethered harness would be fatal if the boat wasn't stopped very quickly even in calm water, in a seaway with 30knots or more of wind, (w
|
By
Danny and Yvonne SIMMS
· #66052
·
|
|
Jacklines
Hi Daniel, Alan and aare n agreement here. Same policy don't fall overboard. You ever know when your boat might do an unexpected lurch that could even tip you out of the Cockpit. However there is anot
Hi Daniel, Alan and aare n agreement here. Same policy don't fall overboard. You ever know when your boat might do an unexpected lurch that could even tip you out of the Cockpit. However there is anot
|
By
Danny and Yvonne SIMMS
· #65947
·
|
|
Jacklines
Hi Dave, it is an issue I have always had front of mind. And as I have said elsewhere, being towed at 8 knots survival is at most a matter of minutes. If someone has a solution with a new design great
Hi Dave, it is an issue I have always had front of mind. And as I have said elsewhere, being towed at 8 knots survival is at most a matter of minutes. If someone has a solution with a new design great
|
By
Danny and Yvonne SIMMS
· #65941
·
|
|
Jacklines
Hi Rob, I have two sets. Both webbing. The first runs from the cleat on top of the windlass down both sides over all sheets etc to the big stern cleats either side. The second one goes, again from the
Hi Rob, I have two sets. Both webbing. The first runs from the cleat on top of the windlass down both sides over all sheets etc to the big stern cleats either side. The second one goes, again from the
|
By
Danny and Yvonne SIMMS
· #65922
·
|
|
Ballooner or 2nd Genoa
Hi Daniel, in my situation a drogue would have been totally out of the question. Imagine the loads with full sail up and 35 knots gusting to ??? and it would not have addressed my problem. Too much sa
Hi Daniel, in my situation a drogue would have been totally out of the question. Imagine the loads with full sail up and 35 knots gusting to ??? and it would not have addressed my problem. Too much sa
|
By
Danny and Yvonne SIMMS
· #65878
·
|
|
Ballooner or 2nd Genoa
Hi Daniel, no such thing as a silly question. Usually there are a whole lot of other people who are not game to ask it and are so grateful when you do. As to your motoring in circles to roll the sails
Hi Daniel, no such thing as a silly question. Usually there are a whole lot of other people who are not game to ask it and are so grateful when you do. As to your motoring in circles to roll the sails
|
By
Danny and Yvonne SIMMS
· #65875
·
|
|
Ballooner or 2nd Genoa
Thanks Eric, that is the beauty of the forum Kind Regards Danny SM 299 Ocean Pearl
Thanks Eric, that is the beauty of the forum Kind Regards Danny SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
· #65863
·
|
|
Ballooner or 2nd Genoa
Hi Daniel. No I did not allow the sails to be blow completely over the bow. Running like that for 24 hours would have seen them flog to pieces and the flogging would have imparted damaging shock loads
Hi Daniel. No I did not allow the sails to be blow completely over the bow. Running like that for 24 hours would have seen them flog to pieces and the flogging would have imparted damaging shock loads
|
By
Danny and Yvonne SIMMS
· #65860
·
|
|
Ballooner or 2nd Genoa
Hi all, 12 years ago we were sailing en route to Panama from Grenada. Had the twins up as evening came on and the wind got up over 20 knots so we went to furl and it jammed, couldn't furl. Big seas an
Hi all, 12 years ago we were sailing en route to Panama from Grenada. Had the twins up as evening came on and the wind got up over 20 knots so we went to furl and it jammed, couldn't furl. Big seas an
|
By
Danny and Yvonne SIMMS
· #65854
·
|
|
Bilge pump spares
Hi Bill, I agree, the flapper valves over time develop a curve upwards meaning they dont easily seal Danny SM 299 Ocean Pearl
Hi Bill, I agree, the flapper valves over time develop a curve upwards meaning they dont easily seal Danny SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
· #65845
·
|
|
domestic reverse osmosis filter for tank water
#galley
Hi again Nicolas, one more comment. I never use the watermaker in harbours (unless large and clean) or marinas for good reason and if I spend a week or two in that situation rain collection is a big h
Hi again Nicolas, one more comment. I never use the watermaker in harbours (unless large and clean) or marinas for good reason and if I spend a week or two in that situation rain collection is a big h
|
By
Danny and Yvonne SIMMS
· #65801
·
|
|
domestic reverse osmosis filter for tank water
#galley
Hi Nicolas, glad to help. I made a rain catcher tarpaulin with a shape to the center and a funnel shape to attach a hose to and ran the hose to the tank filler. I tied it to the shrouds. In the tropic
Hi Nicolas, glad to help. I made a rain catcher tarpaulin with a shape to the center and a funnel shape to attach a hose to and ran the hose to the tank filler. I tied it to the shrouds. In the tropic
|
By
Danny and Yvonne SIMMS
· #65799
·
|
|
domestic reverse osmosis filter for tank water
#galley
Hi Nicolas, At times I collect rain water direct to the tank and it is drinkable as it arrives. The water for my land based living for the past 22 years has all been rainwater collected from the roof
Hi Nicolas, At times I collect rain water direct to the tank and it is drinkable as it arrives. The water for my land based living for the past 22 years has all been rainwater collected from the roof
|
By
Danny and Yvonne SIMMS
· #65794
·
|
|
A curious leak ….
Hi all, I had fresh water in that same area, accumulating slowly. In my case it was the sink faucet base had rusted. Replaced it, fixed. For those who will ask I got an identical unit from a local spe
Hi all, I had fresh water in that same area, accumulating slowly. In my case it was the sink faucet base had rusted. Replaced it, fixed. For those who will ask I got an identical unit from a local spe
|
By
Danny and Yvonne SIMMS
· #65735
·
|
|
Sandblasting in Port St-Louis/Port Napoleon
With you on that Bill, good advice for you I believe Tilo. Kind Regards Danny SM 299 Ocean Pearl
With you on that Bill, good advice for you I believe Tilo. Kind Regards Danny SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
· #65691
·
|
|
SM additional aft hatch and cockpit table
Good advice Bill, your ventilation plan is new to me but makes absolute sense. I totally agree with your precautionary approach to cutting a large hole in a cored and curved deck. Kind Regards Danny S
Good advice Bill, your ventilation plan is new to me but makes absolute sense. I totally agree with your precautionary approach to cutting a large hole in a cored and curved deck. Kind Regards Danny S
|
By
Danny and Yvonne SIMMS
· #65655
·
|
|
[Amel Yacht Owners] New sails
You are welcome Stefan, always happy to help. Danny SM 299 Ocean Pearl
You are welcome Stefan, always happy to help. Danny SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
· #65646
·
|
|
Volvo TMD 22 Engine Mounts - Help please
Hi Scott, ring me on 0274 876 368 Danny
Hi Scott, ring me on 0274 876 368 Danny
|
By
Danny and Yvonne SIMMS
· #65645
·
|
|
Volvo TMD 22 Engine Mounts - Help please
Hi Scott, it was Sea Power in Opua. However, while I am sure they would have had a workable solution my idea trumped whatever they may have done with simplicity and effectiveness. They did the drillin
Hi Scott, it was Sea Power in Opua. However, while I am sure they would have had a workable solution my idea trumped whatever they may have done with simplicity and effectiveness. They did the drillin
|
By
Danny and Yvonne SIMMS
· #65633
·
|