Perfect, thank you Alan From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Roque <ediroque@...> Sent: Wednesday, 11 September 2019 7:55:41 PM To: main@amelyachtow

Hi All, Does anyone know where to get the rebuild kits for the Reya Marina ZZ bilge pump. I got on the Reya website but if my translation is right they do not sell to individuals and a google search u

It’s a lot easier to head to Bermuda then south than to bash into it from the Bahamas Alan Grayson SM 406 Ora Pai Get Outlook for iOS

Hi Kent, I will be heading to Bermuda first so that cuts me out sorry. Regards Alan Grayson SM 406 Ora Pai Annapolis From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of

I had a bit of corrosion at the mast base but not bad. I replaced the pads from Maud, expensive little suckers, $280 for the pair. I don’t think I really needed to do that as there is not really anywa

Hi Scott, it is a 30x40x7 standard although mine for some reason was a very sloppy fit so I machined it out to fit a 30x41x7. It should be a good press fit. Regards Alan Grayson SM 406 Ora Pai Annapol

Hi Mike, yes we have just finished with the rerig. We pulled the masts which for us was the best way for us to go. We have only had the boat less than a year so we had no idea what condition all the p

Thanks Guys, I think i have found a shop who can do it. Thanks for the advice i did not even think about hydraulic shops as i would prefer food grade hoses. Regards Alan Grayson SV Ora Pai

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged. There are 2 op

Hi Alex, I have just arrived at Jabin. Have you got hold of the owner? If not I’ll go to the office and try and get their details. I have a SM and am also interested in the watt and sea. Regards Alan

Hi All, thanks for the comments, I have spoken with the rigger again today to verify what everyone has said. He said he did not mind doing the work with the mast up but said if I needed to do anything

He said to be able to have a good look over everything and easier to do rigging with the mast pulled. M Yacht Rigging in Annapolis and yes I know you only recommend a couple of other riggers Alan Gray

Hello, I'm about to rerig our Super Maramu and the riggers are saying that they would prefer to pull the masts and that it should be done every 7 years or so anyway. I have ordered rigging from Acmo a

Hi Duane, what were your symptoms? How long does it run on heat mode? Does the thermostat shut it down when it's warm? Mine runs for about 7 mins just fine then stops. It has done this for a while but

I have 6gal for the dinghy and 5gal for refill. When at anchor the 6 gal is stored in the dinghy and the 5 gal is tied to lifelines. When underway the dinghy is lashed to the aft cabin top and the can

Hey Paul, if you do manage to order some small quantity I wouldn't mind an order of 4 as I have 2 lights that are out. The rockers are broken so I'd like 4 of the rockers and 4 switches just in case.

Thanks Ian, I did notice one of the fuses was a bit loose but not loose enough to worry me so I might go back and tweak it. Thanks Alan Grayson Great HBR Cay, Berry islands From: main@AmelYachtOwners.

Hi Gary, when it shuts down it is definitely not a breaker and to be honest I did not notice any lights at all when it shut down. I noticed on the pressure gauge that the pressure gauge dropped off ri

Here’s what I have found. I installed a bypass hose on the product water so I could divert the water before it went into the tank. I removed the wires off the pressure sensor and everything came back

Hi Eric, yes I removed both hoses from the membranes and I got water out. We turned the knob increasing the pressure slowly. We were just in the green and we had product water start to flow, however w