My wife, Debbie, and I are recent purchasers of an A54 #68currently in Fort Lauderdale. We arepleased to be members of such a dedicated community of people that are willingto help each other. Hopefull

I talked with Paul today, I don't know if it the same program you referenced. He indicated that if he were able to order 5 units or more he would receive substantial savings from Bamar that he would p

Hello Kent, S/V Kristy, SM243 - It truly is a small world. We are around the corner from you, just south of South Lake, in the Suntex - Loggerhead Marina slip 119. Give us a call if you have time: fou

Would anyone know the name & manufacturer if possible OR the gelcoat color code number for the 54?? Thanks in advance. Mark & Debbie A54 #68, S/V Brass RingFt. Lauderdale

I talked with Paul at Bamar USA Friday. Paul forwarded the letter below, I told him Iwould send it out to all interested parties on the A O G. With the interest generated from the Amel OwnersGroup plu

The SDS for Barnacle Buster identifies phosphoric acid as the primary ingredient at 85% at a concentration of 5% - 20%. I think the rationale for not being specific to try and protect trade secrets. A

Check out the following link, it contains a bunch of info for Airmar products. I had similar questions. http://www.gemeco.com/st850.php Mark Mueller A54-68 Brass Ring Ft. Lauderdale, glued to the dock

A couple of thoughts - always protect the motor windingsfrom heat and arc flash. 1) Use a bearing separator kit, it is a diamond shapedbeveled puller. This clamps on the smallspace between the inner r

Did you come up with the correct size capacitor for your watermaker? I have a 160 liter per hour version and the capicator is painted obstructing the name plate. Any information would be appreciated.

Hi Mohammad, I removed the two capacitors on the high-pressure pump andmeasured their capacitance. The first was18mfd and the second measured 25mfd. Iassumed they should have been 30mfd each. I replac

The low pressure tap connects to the compressor case directly. Mine is located on the dome of the compressor. Mark Mueller A54 - 68, Brass Ring Ft. Lauderdale

We have an A54 with a 230v 160 LPH Dessalator, water cooledair conditioning, and a Volvo 110 HP engine. 1) When operating the Onan, water maker, and the Volvo aboveapproximately 1250 RPM the low-press

Thank you for your thoughts and input. I will dig deeper and let you know what I find.

Hi Christine, on our 2007 A54 the 12,000 BTU Climma islocated under the settee in the salon. By your description it is hard to tell if you have physically seen thisunit or just a picture. If I were go

Dean, Sorry for all your troubles but thank you for yourinformation. My wife had me check the dipstickthis morning. Oddly, as many things onthis boat seem to be, the part number on this dipstick reads

Hi Eric, I was curious and looked at the March info. I believe the 'AC' designation refers to an open style motor that should not be exposed to the possibility of water getting on the motor. The 'CP'

Hi Arno, We are interested in a stern arch also. Are you planning on straddling the sterncleat with the vertical struts or having the rear strut attach at the transom? I talked with Atlantic Towers at

Please add Mark & Debbie Mueller to your "interested list". Currently still stuck on the east coast, not sure we will make it down that far. Mark & Debbie Mueller Brass Ring, A54

Hi Gary, We have Mastervolt chargers and they do have have an equalization mode. By the discussion in the manual you can dicern that the equalization mode is not intended to be used very often. Below

We have a ChargeMaster 24/30-3 & a ChargeMaster 24/100-3. The 30 amp charger is the newer of the two. Mastervolt was introducing a 40 amp version that would charge both the 24 & 12 volt batteries (eng