678 L x 70 H x 25 D; millimeters

In need of a Lewmar Medium Profile Hatch gasket size 50 - found a deal that may include free freight and a 10% discount. Hurry before they are gone!

Does anyone know the rpm of the Flojet pump?

Attached is the Parts and Installation Manual for the Lewmar electric winches on our Amel. Hope it will cover your winch also.

I replaced the original Amel seat with a seat from Todd. It fits well and looks pretty good. I use the 655341 seat with the 650772 mounting plate both from Todd and reused the original pedestal mounti

The original was literally a pain in the butt. I always thought if I leaned back in thoughtful repose I would wind up on the cabin sole wedged in by the fire extinguishers. The seat angles are very co

If your E-Stop button does not want to work a new actuator rated IP65 or higher, preferably IP67, would solve the issue and should not be affected by moisture in the future.

We have a ZF-25 2.0 transmission, the service manual states: 3.5 Sailing or moving in tow Rotation of the propeller while the boat is sailing, being towed, or anchored in a river, as well as operation

As Alan Leslie mentioned the Johnson Viking 32, we have also replaced the original AMFA pump with a Johnson Viking. It is well-built, extremely easy to maintain, has a higher output than the original

#replacement

I have purchased both replacement switches and boots for the regular toggle switches from Digikey.com. The boots listed below are silicone however neoprene is also available. Go to the link and you ca

After a scientifically designed poll and an equally well executed analysis thieves in the southern hemisphere were only slightly more interested in the Secret Spot than the northern hemisphere. Thieve

I read the attached article regarding invoices slip renters are receiving due to the damage caused be Hurricane Isaias. This could be an expanding risk to boat owners in the future beyond the direct r

I have changed the valve on the aft head. My advice to any 54 owner needing to change the aft head valve is to sail to an Amel service center and pay them to change that valve. Before you start be sur

The aft valve is 1 1/4" BSPP I believe the forward head is the same. One of the guys that has changed the forward valve may respond or contact them directly to confirm.

We had a line jam while lifting 120 pounds of dinghy out of the water resulting in a stalled primary winch overloading ending with an inoperable winch. Lewmar indicates the winch control box will elec

Recently replaced the Calapeda with the Iwaki MD70RT-220 50/60 Hz, magnetic drive pump, 1” ID hose inlet x 1” NPT M outlet. It has an internal cooling circuit that keeps the motor cool and provides pl

Take a look at the Groco valve, I used this valve. It has a grease zerk to keep the valve operating smoothly. https://www.groco.net/products/valves-seacocks/inline-valves/ibv-series-bspp-thread

I received a quote from Maud in April 2019 for 236.07 Euros plus tax and transport. This was for a 54, not clear if the disconnects are interchangeable.

If you are a bit of a contortionist you can get to the compressor and board by just sliding the the box forward. If possible have a filter/drier installed if you open the refrigerant lines, Frigoboat

Hi Billy, be very careful adding a stop leak product to any refrigerant system. When these items come in contact with atmospheric products they form temporary seals. However, if you have air in your s